Explore the vast range of titles available.

Technologically critical rare-earth elements are notoriously difficult to separate, owing to their subtle differences in ionic radius and coordination number 1 – 3 . The natural lanthanide-binding protein lanmodulin (LanM) 4 , 5 is a sustainable alternative to conventional solvent-extraction-based separation 6 . Here we characterize a new LanM, from Hansschlegelia quercus ( Hans -LanM), with an oligomeric state sensitive to rare-earth ionic radius, the lanthanum(III)-induced dimer being >100-fold tighter than the dysprosium(III)-induced dimer. X-ray crystal structures illustrate how picometre-scale differences in radius between lanthanum(III) and dysprosium(III) are propagated to Hans -LanM’s quaternary structure through a carboxylate shift that rearranges a second-sphere hydrogen-bonding network. Comparison to the prototypal LanM from Methylorubrum extorquens reveals distinct metal coordination strategies, rationalizing Hans -LanM’s greater selectivity within the rare-earth elements. Finally, structure-guided mutagenesis of a key residue at the Hans- LanM dimer interface modulates dimerization in solution and enables single-stage, column-based separation of a neodymium(III)/dysprosium(III) mixture to >98% individual element purities. This work showcases the natural diversity of selective lanthanide recognition motifs, and it reveals rare-earth-sensitive dimerization as a biological principle by which to tune the performance of biomolecule-based separation processes. A study biochemically and structurally characterizes a lanmodulin from Hansschlegelia quercus with an oligomeric state sensitive to rare-earth ionic radius.

The neodymium (Nd) isotopic composition of seawater has been used extensively to reconstruct ocean circulation on a variety of time scales. However, dissolved neodymium concentrations and isotopes do not always behave conservatively, and quantitative deconvolution of this non-conservative component can be used to detect trace metal inputs and isotopic exchange at ocean–sediment interfaces. In order to facilitate such comparisons for historical datasets, we here provide an extended global database for Nd isotopes and concentrations in the context of hydrography and nutrients. Since 2010, combined datasets for a large range of trace elements and isotopes are collected on international GEOTRACES section cruises, alongside classical nutrient and hydrography measurements. Here, we take a first step towards exploiting these datasets by comparing high-resolution Nd sections for the western and eastern North Atlantic in the context of hydrography, nutrients and aluminium (Al) concentrations. Evaluating those data in tracer–tracer space reveals that North Atlantic seawater Nd isotopes and concentrations generally follow the patterns of advection, as do Al concentrations. Deviations from water mass mixing are observed locally, associated with the addition or removal of trace metals in benthic nepheloid layers, exchange with ocean margins (i.e. boundary exchange) and/or exchange with particulate phases (i.e. reversible scavenging). We emphasize that the complexity of some of the new datasets cautions against a quantitative interpretation of individual palaeo Nd isotope records, and indicates the importance of spatial reconstructions for a more balanced approach to deciphering past ocean changes. This article is part of the themed issue 'Biological and climatic impacts of ocean trace element chemistry'.

Mare volcanics on the Moon are the key record of thermo-chemical evolution throughout most of lunar history 1 – 3 . Young mare basalts—mainly distributed in a region rich in potassium, rare-earth elements and phosphorus (KREEP) in Oceanus Procellarum, called the Procellarum KREEP Terrane (PKT) 4 —were thought to be formed from KREEP-rich sources at depth 5 – 7 . However, this hypothesis has not been tested with young basalts from the PKT. Here we present a petrological and geochemical study of the basalt clasts from the PKT returned by the Chang’e-5 mission 8 . These two-billion-year-old basalts are the youngest lunar samples reported so far 9 . Bulk rock compositions have moderate titanium and high iron contents  with KREEP-like rare-earth-element and high thorium concentrations. However, strontium–neodymium isotopes indicate that these basalts were derived from a non-KREEP mantle source. To produce the high abundances of rare-earth elements and thorium, low-degree partial melting and extensive fractional crystallization are required. Our results indicate that the KREEP association may not be a prerequisite for young mare volcanism. Absolving the need to invoke heat-producing elements in their source implies a more sustained cooling history of the lunar interior to generate the Moon’s youngest melts. Isotopic analysis of basalt clasts returned from the Moon by the Chang’e-5 mission indicates that the rocks were derived from a mantle source that lacked potassium, rare-earth elements and phosphorus.

Neodymium vanadate nanoparticles (NdVO 4 NPs) have recently garnered significant attention due to their distinct physical and chemical features and utilization at the cutting edge of various biomedical fields. This review provides an in-depth investigation of the vast array of biomedical applications associated with NdVO 4 NPs. An overview of NdVO 4 NPs and various synthesis and characterization techniques are among the key topics covered in the discussion. This review covers the electrochemical processes, photocatalytic and Sensing activity of the nanoparticle in great detail. The investigation of the possible biological, environmental, and photocatalytic uses of NdVO 4 NPs highlights their complex character even further. Additional potential uses are also investigated. NdVO 4 NPs have significant effectiveness, but there are drawbacks, which are discussed in this paper. The paper ends with a fruitful discussion of future research prospects, paving the way for NdVO 4 NPs to progress in various medicinal applications.

In this present work, a PVA/PVP-blend polymer was doped with various concentrations of neodymium oxide (PB-Nd+3) composite films using the solution casting technique. X-ray diffraction (XRD) analysis was used to investigate the composite structure and proved the semi-crystallinity of the pure PVA/PVP polymeric sample. Furthermore, Fourier transform infrared (FT-IR) analysis, a chemical-structure tool, illustrated a significant interaction of PB-Nd+3 elements in the polymeric blends. The transmittance data reached 88% for the host PVA/PVP blend matrix, while the absorption increased with the high dopant quantities of PB-Nd+3. The absorption spectrum fitting (ASF) and Tauc’s models optically estimated the direct and indirect energy bandgaps, where the addition of PB-Nd+3 concentrations resulted in a drop in the energy bandgap values. A remarkably higher quantity of Urbach energy for the investigated composite films was observed with the increase in the PB-Nd+3 contents. Moreover, seven theoretical equations were utilized, in this current research, to indicate the correlation between the refractive index and the energy bandgap. The indirect bandgaps for the proposed composites were evaluated to be in the range of 5.6 eV to 4.82 eV; in addition, the direct energy gaps decreased from 6.09 eV to 5.83 eV as the dopant ratios increased. The nonlinear optical parameters were influenced by adding PB-Nd+3, which tended to increase the values. The PB-Nd+3 composite films enhanced the optical limiting effects and offered a cut-off laser in the visible region. The real and imaginary parts of the dielectric permittivity of the blend polymer embedded in PB-Nd+3 increased in the low-frequency region. The AC conductivity and nonlinear I-V characteristics were augmented with the doping level of PB-Nd+3 contents in the blended PVA/PVP polymer. The outstanding findings regarding the structural, electrical, optical, and dielectric performance of the proposed materials show that the new PB-Nd+3-doped PVA/PVP composite polymeric films are applicable in optoelectronics, cut-off lasers, and electrical devices.

Uranyl acetate is the standard contrasting agent in electron microscopy (EM), but it is toxic and radioactive. We reasoned neodymium acetate might substitute uranyl acetate as a contrasting agent, and we find that neodymium acetate indeed can replace uranyl acetate in several routine applications. Since neodymium acetate is not toxic, not radioactive and easy to use, we foresee neodymium will replace uranyl in many EM sample preparation applications worldwide.

Pure ZnO and Neodymium (Nd) doped ZnO nanoparticles (NPs) were synthesized by the co-precipitation method. The synthesized nanoparticles retained the wurtzite hexagonal structure. From FESEM studies, ZnO and Nd doped ZnO NPs showed nanorod and nanoflower like morphology respectively. The FT-IR spectra confirmed the Zn-O stretching bands at 422 and 451 cm −1 for ZnO and Nd doped ZnO NPs respectively. From the UV-VIS spectroscopic measurement, the excitonic peaks were found around 373 nm and 380 nm for the respective samples. The photoluminescence measurements revealed that the broad emission was composed of ten different bands due to zinc vacancies, oxygen vacancies and surface defects. The antibacterial studies performed against extended spectrum β-lactamases (ESBLs) producing strains of Escherichia coli and Klebsiella pneumoniae showed that the Nd doped ZnO NPs possessed a greater antibacterial effect than the pure ZnO NPs. From confocal laser scanning microscopic (CLSM) analysis, the apoptotic nature of the cells was confirmed by the cell shrinkage, disorganization of cell wall and cell membrane and dead cell of the bacteria. SEM analysis revealed the existence of bacterial loss of viability due to an impairment of cell membrane integrity, which was highly consistent with the damage of cell walls.

Colloidal CsPbX3 (X = Br, Cl, and I) perovskite nanocrystals exhibit tunable bandgaps over the entire visible spectrum and high photoluminescence quantum yields in the green and red regions. However, the lack of highly efficient blue‐emitting perovskite nanocrystals limits their development for optoelectronic applications. Herein, neodymium (III) (Nd3+) doped CsPbBr3 nanocrystals are prepared through the ligand‐assisted reprecipitation method at room temperature with tunable photoemission from green to deep blue. A blue‐emitting nanocrystal with a central wavelength at 459 nm, an exceptionally high photoluminescence quantum yield of 90%, and a spectral width of 19 nm is achieved. First principles calculations reveal that the increase in photoluminescence quantum yield upon doping is driven by an enhancement of the exciton binding energy due to increased electron and hole effective masses and an increase in oscillator strength due to shortening of the PbBr bond. Putting these results together, an all‐perovskite white light‐emitting diode is successfully fabricated, demonstrating that B‐site composition engineering is a reliable strategy to further exploit the perovskite family for wider optoelectronic applications. Narrowband blue‐emitting CsPbBr3 perovskite nanocrystals with a photoluminescence quantum yield of 90% are achieved by B‐site doping of neodymium ions. The doping concentration can tune the emission spectrum in a controlled manner. First principles calculations reveal that dopant‐induced electronic changes dominate the bandgap tunability and the high quantum yield is associated with enhanced exciton binding energy and oscillator strength.