Explore the vast range of titles available.

Power systems are becoming more and more complex in nature due to the integration of several power electronic devices. Protection of such systems and augmentation of reliability as well as stability highly depend on limiting the fault currents. Several fault current limiters (FCLs) have been applied in power systems as they provide rapid and efficient fault current limitation. This paper presents a comprehensive literature review of the application of different types of FCLs in power systems. Applications of superconducting and non-superconducting FCLs are categorized as: (1) application in generation, transmission and distribution networks; (2) application in alternating current (AC)/direct current (DC) systems; (3) application in renewable energy resources integration; (4) application in distributed generation (DG); and (5) application for reliability, stability and fault ride through capability enhancement. Modeling, impact and control strategies of several FCLs in power systems are presented with practical implementation cases in different countries. Recommendations are provided to improve the performance of the FCLs in power systems with modification of its structures, optimal placement and proper control design. This review paper will be a good foundation for researchers working in power system stability issues and for industry to implement the ongoing research advancement in real systems.

To cope with the increasing energy demand, power systems, especially distribution networks, face many challenges. Recently, these networks have become complex and large, and their stability and reliability are not easy to be handled. The integration of renewable energy resources and at the same time limiting their accompanied high fault currents is one of the approvable suggestions. Many solutions have appeared to restrict the fault currents, but fault current limiters (FCLs) arise as an efficient and promising solution to whether to interrupt or limit the fault currents to allowable limits. This paper presents a literature review of the integration of renewable energy resources as distributed generation units (DGs) and FCLs in distribution networks. The DGs can be categorized based on their size and ability to deliver active or reactive power in addition to their fuel. All of solar, wind, water, biomass, geothermal, and fuel cell are utilized as the main engine for these units. Additionally, a survey about FCLs is provided, including their diverse types and applications in either medium- or low-voltage networks. FCLs are divided into reactor, pyrotechnic, non-superconducting (solid state), and the last-developed ones, superconducting FCLs. In addition, the implemented optimization techniques are summarized to correctly employ both FCLs and DGs. These techniques vary between classical and modern, whereas more methods are developed to suit the renewable energy intermittence and uncertainty and the power system operators’ aspirations. Moreover, in this paper, the optimal allocation of diverse types of DGs correlated with FCLs is presented and applied to the real Egyptian distribution network of the East Delta Network (EDN). The results show the avails obtained where the power losses are significantly reduced, with respect to the total load, from 3.59% in the initial case to 0.296%. In addition, the fault current returns to its initial value, removing the percentage of increase of 20.93%.

The direct current circuit breakers are considered a promising option to protect the transmission line against commonly appearing line-to-ground fault. However, the challenges of losses in the nonoperational stage, escalation of response against fault current, and large fault current handling capability remain the debatable issues for direct current circuit breakers. This paper introduces a novel topology of the hybrid circuit breaker with fault-current-limiting characteristics, which contains three branches: the main branch, fault-current-limiting branch, and energy absorption branch. The main branch includes a mechanical switch, breaker impedance, and bidirectional power electronics switches. In the fault-current-limiting branch, a fault-current-limiting circuit is introduced which contains n numbers of bidirectional switches and current-limiting inductors, which are connected in series to make the design modular in nature. During the normal working stage, the current flows through the main branch of the breaker. Once a fault in the system is confirmed, the fault current is transferred to the fault-current-limiting branch. At this stage, the intensity of the fault current is reduced significantly using the fault-current-limiting circuit, and finally, the residual current is shifted to the energy absorption branch. The working principle, design considerations, and parametric analysis concerning the design of hybrid circuit breakers are incorporated in this paper. The performance of the proposed breaker is evaluated using a three-terminal voltage-source converter-based high-voltage direct current transmission network; for this purpose, a PSCAD/EMTDC simulation tool is used. The performance of the proposed breaker is also compared with other topologies. The comparative analysis shows that the proposed breaker is a good alternative considering high fault current interruption requirements, response time against fault current, and power losses.

Single-stage grid-interfaced PV topologies have challenges with high grid fault currents, despite being more efficient, simpler to implement, and less expensive than two-stage ones. In such systems, a single inverter is required to perform all grid-interface tasks. i.e., maximum power point tracking (MPPT), DC voltage stabilization, and grid current control. This necessitates a hardware-based fault current limitation solution rather than a software-based one to avoid adding to the inverter’s control complexity and to mitigate the implications of PV system tripping. Therefore, in this study, a dual-functional non-superconducting saturated-core inductor-based (SCI) reactor is proposed to be applied at the output of a single-stage PV inverter. It involves two operation modes: a grid pre-fault mode where it filters the line current, hence minimizing its THD, and a grid-fault mode where it acts as a fault current limiter (FCL). Controlling the DC saturation current flowing into its control winding terminals alters the core magnetization of the SCI to vary its impedance between a low value during normal utility operation and a maximal value during faults. Consequently, the system is protected against inverter failures or unnecessary circuit-breaker tripping, which preserves service continuity and reduces system losses. Moreover, compared to existing FCLs, the proposed topology is an appealing candidate in terms of cost, size, reliability, and harmonic filtering ability. The bi-functionality and usefulness of the proposed reactor are confirmed using simulation and experimental results.

This monograph provides an up-to-date introduction to the theory of quantum fluctuations in inhomogeneous superconducting materials. It is suitable as a graduate text as it has grown out of the author’s extensive notes from a graduate-level course several years previously. Since then, the material has been constantly updated and revised with the result that this book is the most current one on the important and wide-ranging topic of inhomogeneous superconductors.