Explore the vast range of titles available.

Recently, a type of ferroelectric nematic fluid has been discovered in liquid crystals in which the molecular polar nature at molecule level is amplified to macroscopic scales through a ferroelectric packing of rod-shaped molecules. Here, we report on the experimental proof of a polar chiral liquid matter state, dubbed helielectric nematic, stabilized by the local polar ordering coupled to the chiral helicity. This helielectric structure carries the polar vector rotating helically, analogous to the magnetic counterpart of helimagnet. The helielectric state can be retained down to room temperature and demonstrates gigantic dielectric and nonlinear optical responses. This matter state opens a new chapter for developing the diverse polar liquid crystal devices.

Realizing strong nonlinear optical responses is a long-standing goal of both fundamental and technological importance. Recently, substantial efforts have been focused on exploring excitons in solids to achieve nonlinearities even down to few-photon levels. However, a crucial tradeoff arises as strong light–matter interactions require large oscillator strength and short radiative lifetime of excitons, which limits their nonlinearity. Here we experimentally demonstrate strong nonlinear optical responses with large oscillator strength by exploiting the coupling between excitons and carriers in an atomically thin semiconductor. By controlling the electric field and electrostatic doping of trilayer WSe 2 , we observe the hybridization between intralayer and interlayer excitons and the formation of Fermi polarons. Substantial optical nonlinearity is observed under continuous-wave and pulsed laser excitation, where the Fermi polaron resonance blueshifts by as much as ~10 meV. Intriguingly, we observe a remarkable asymmetry in the optical nonlinearity between electron and hole doping, which is tunable by the applied electric field. We attribute these features to the optically induced valley polarization due to the interactions between excitons and free charges. Our results establish atomically thin heterostructures as a highly versatile platform for engineering nonlinear optical response with applications to classical and quantum optoelectronics. Exploiting the interactions between bright excitons and free carriers in an atomically thin semiconductor of trilayer tungsten diselenide WSe 2 results in Fermi polarons that exhibit unusually large nonlinearity.

Based on ab initio software packages using nonorthogonal localized orbitals, we develop a general scheme of calculating response functions. We test the performance of this method by calculating nonlinear optical responses of materials, like the shift current conductivity of monolayer WS2, and achieve good agreement with previous calculations. This method bears many similarities to Wannier interpolation, which requires a challenging optimization of Wannier functions due to the conflicting requirements of orthogonality and localization. Although computationally heavier compared to Wannier interpolation, our procedure avoids the construction of Wannier functions and thus enables automated high throughput calculations of linear and nonlinear responses related to electrical, magnetic and optical material properties.

Nonlinear optical materials have gained immense scientific interest in the recent times owing to their vast applications in various fields. Continuous strides are made to design and synthesize materials with large nonlinear optical response and high thermodynamic stability. In this regard, we present here bi-alkali metal doping on boron phosphide nanocage as a new strategy to design thermodynamically stable materials with large nonlinear optical response. The geometric, thermodynamic, electronic, optical and nonlinear optical properties of complexes are explored through density functional theory (DFT) simulations. The doping of alkali metal atoms introduces excess of electrons in the host (B 12 P 12 ) nanocage. These electrons contribute towards the formation of new HOMOs, which reduce the HOMO–LUMO gaps of the designed complexes. The HOMO–LUMO gaps of the designed complexes range from 0.63 eV to 3.69 eV. The diffused excess electrons also induce large hyperpolarizability values in the complexes i.e. up to 4.0 × 10 4 au. TD-DFT calculations have been performed for crucial transition states and UV–VIS analysis. Non-covalent interaction (NCI) along with quantum theory of the atoms in molecules (QTAIM) analyses are carried out to understand the bonding interactions between alkali metal atoms and B 12 P 12 nanocage. All the obtained results suggest that bi-alkali metal doped nanocages are exceptionally stable materials with improved NLO response.

Interlayer charge‐transfer (CT) in 2D atomically thin vertical stacks heterostructures offers an unparalleled new approach to regulation of device performance in optoelectronic and photonics applications. Despite the fact that the saturable absorption (SA) in 2D heterostructures involves highly efficient optical modulation in the space and time domain, the lack of explicit SA regulation mechanism at the nanoscale prevents this feature from realizing nanophotonic modulation. Here, the enhancement of SA response via CT in WS2/graphene vertical heterostructure is proposed and the related mechanism is demonstrated through simulations and experiments. Leveraging this mechanism, CT‐induced SA enhancement can be expanded to a wide range of nonlinear optical modulation applications for 2D materials. The results suggest that CT between 2D heterostructures enables efficient nonlinear optical response regulation. Saturable absorption modulation of 2D heterostructures is an important issue in the field of nonlinear optics of 2D materials. In this work, the mechanism of interfacial carrier transfer modulation on saturable absorption response by experimental and simulation methods are designed and verified, which provides guidance for the application of 2D materials in all‐optical and optoelectronic devices.

The high-power lasers have important implications for present and future light-based technologies; therefore, the protection measures against their high-intensity radiation are extremely important. Currently, a great deal of interest is directed towards the development of new nonlinear optical materials for passive optical limiters, which are used to protect the human eye and sensitive optical and optoelectronic devices from laser-induced damage. Biopolymers doped with natural dyes are emerging as a new class of optical materials with interesting photosensitive properties. In this paper, the optical limiting capability of deoxyribonucleic acid bio-polymer functionalized with Turmeric natural dye has been demonstrated for the first time, to the best of our knowledge. The experimental investigation of the optical limit has been done by the Intensity-scan method in the NIR spectral domain at the important telecommunication wavelength of 1550 nm, using ultrashort laser pulses (~120 fs). Several optical properties of this natural dye are presented and discussed. The values of the optical transmittance in the linear regime, the saturation intensity of the nonlinear transmittance curves, and the coefficient of the nonlinear absorption have been determined. The influence of the DNA biopolymer and natural dye concentration on the optical limiting properties of the investigated biomaterials is reported and discussed. The photostability and thermal stability of the investigated solutions have also been evaluated by monitoring the temporal decay of the normalized absorption spectra under illumination with UVA light and heating, respectively. Our results evidence the positive influence of the DNA, which embeds Turmeric natural dye, on the optical limiting functionality itself and on the photostability and thermal stability of this novel material. The performed study reveals the potential of the investigated novel biomaterial for applications in nonlinear photonics, in particular in optical limiting.

Carbon-based polynuclear clusters are designed and investigated for geometric, electronic, and nonlinear optical (NLO) properties at the CAM-B3LYP/6-311++G(d,p) level of theory. Significant binding energies per atom (ranging from −162.4 to −160.0 kcal mol−1) indicate excellent thermodynamic stabilities of these polynuclear clusters. The frontier molecular orbital (FMOs) analysis indicates excess electron nature of the clusters with low ionization potential, suggesting that they are alkali-like. The decreased energy gaps (EH-L) with increased alkali metals size revael the improved electrical conductivity (σ). The total density of state (TDOS) study reveals the alkali metals’ size-dependent electronic and conductive properties. The significant first and second hyperpolarizabilities are observed up to 5.78 × 103 and 5.55 × 106 au, respectively. The βo response shows dependence on the size of alkali metals. Furthermore, the absorption study shows transparency of these clusters in the deep-UV, and absorptions are observed at longer wavelengths (redshifted). The optical gaps from TD-DFT are considerably smaller than those of HOMO-LUMO gaps. The significant scattering hyperpolarizability (βHRS) value (1.62 × 104) is calculated for the C3 cluster, where octupolar contribution to βHRS is 92%. The dynamic first hyperpolarizability β(ω) is more pronounced for the EOPE effect at 532 nm, whereas SHG has notable values for second hyperpolarizability γ(ω).

The ultrafast third-order optical nonlinearity of c-plane GaN crystal, excited by ultrashort (fs) high-repetition-rate laser pulses at 1550 nm, wavelength important for optical communications, is investigated for the first time by optical third-harmonic generation in non-phase-matching conditions. As the thermo-optic effect that can arise in the sample by cumulative thermal effects induced by high-repetition-rate laser pulses cannot be responsible for the third-harmonic generation, the ultrafast nonlinear optical effect of solely electronic origin is the only one involved in this process. The third-order nonlinear optical susceptibility of GaN crystal responsible for the third-harmonic generation process, an important indicative parameter for the potential use of this material in ultrafast photonic functionalities, is determined.

The magnetic excitons in diluted magnetic semiconductor (DMS) have varied formats due to the inhomogeneous phases out of doping concentration and/or structural relaxations or defects. Here the high quality cobalt-doped zinc blende ZnSe nanoribbons (NRs) were synthesized, showing bright and color-variable emissions from blue, yellow to a little mixed white colors. Their power and temperature dependent micro-photoluminescence (PL) spectra have been obtained in which two emission bands, one magnetic exciton band near the band-edge and a Co 2+ high-level d – d transition emission band at 550 nm out of their ferromagnetic (FM) coupled aggregates in ZnSe lattice, both bands could also be reflected by a nonlinear optical absorption enhancement. The easy formed stacking fault defects in a chemical vapor deposition (CVD) grown ZnSe zincblende NR took part in the above optical processes out of magnetic polaronic excitons (PXs). The femtosecond (fs) laser pulse pumping on single ZnSe:Co NR produces obvious lasing behavior but with profile of a complicated magnetic exciton interactions with indication of a crossover from collective exciton magnetic polarons (EMP) to bound magnetic polaron (BMP) scattering in Co doped ZnSe NR. These findings indicate the complication of the magnetic coupling natures in varied DMS structures, whose optical properties have been found to be highly nonlinear, due to the involvement of the spin–spin, spin–exciton and spin–phonon interactions, verified by the theoretic calculation in Yang X-T et al (2019 Interstitial Zn-modulated ferromagnetism in Co-doped ZnSe Mater. Res. Express 6 106121).

Organic–inorganic hybrid halide perovskites have emerged as promising optoelectronic materials owing to their exceptional optoelectronic properties and versatile crystal structures. The introduction of chiral organic ligands into perovskite frameworks, breaking the inversion symmetry of the structure, has attracted significant attention toward chiral perovskites. Herein, the recent advances in various synthesis strategies for chiral perovskite single crystals (SCs) are systematically demonstrated. Then, we elucidate an in-depth understanding of the chirality transfer mechanisms from chiral organic ligands to perovskite inorganic frameworks. Furthermore, representative examples of chiral perovskite SC-based applications are comprehensively discussed, including circularly polarized light (CPL) photodetection, nonlinear optical (NLO) responses, and other emerging chirality-dependent applications. In the end, an outlook for future challenges and research opportunities is provided, highlighting the transformative potential of chiral perovskites in next-generation optoelectronic devices.