Explore the vast range of titles available.

When an electric wheelchair is operated using gaze motion, eye movements such as checking the environment and observing objects are also incorrectly recognized as input operations. This phenomenon is called the “Midas touch problem”, and classifying visual intentions is extremely important. In this paper, we develop a deep learning model that estimates the user’s visual intention in real time and an electric wheelchair control system that combines intention estimation and the gaze dwell time method. The proposed model consists of a 1DCNN-LSTM that estimates visual intention from feature vectors of 10 variables, such as eye movement, head movement, and distance to the fixation point. The evaluation experiments classifying four types of visual intentions show that the proposed model has the highest accuracy compared to other models. In addition, the results of the driving experiments of the electric wheelchair implementing the proposed model show that the user’s efforts to operate the wheelchair are reduced and that the operability of the wheelchair is improved compared to the traditional method. From these results, we concluded that visual intentions could be more accurately estimated by learning time series patterns from eye and head movement data.

In recent years, deep learning models, particularly one‐dimensional convolutional networks (1‐D CNNs), have shown significant potential for fault diagnosis of rotating machines. However, existing methods often struggle to generalize to real‐time data and lack adaptability across different operating conditions. To address these challenges, this paper proposes a transfer learning‐based domain‐adaptive 1‐D CNN framework. In this framework, the 1‐D CNN model is initially pre‐trained on source domain data and then fine‐tuned on the target domain by freezing the first three convolutional layers while updating the remaining layers to adapt to domain‐specific features. The proposed framework was validated using rolling bearing and real‐time wind turbine gearbox vibration data. The experimental results show a diagnostic accuracy of 99.99% on bearing fault datasets under varying load conditions, outperforming other state‐of‐the‐art transfer learning methods. Additionally, the model pre‐trained on bearing data achieved a diagnostic accuracy of 98.52% when applied to real‐time gearbox vibration data. These findings confirm the effectiveness of the proposed framework across different settings and its potential applications for a wide range of rotating machinery in the industry. This paper presents a transfer learning‐based domain‐adaptive one‐dimensional convolutional neural network (1‐D CNN) designed to enhance fault diagnosis generalization across varying working conditions and improve adaptability for different types of rotating machines.

Stand-alone screens (SASs) are active sand control methods where compatible screens and slot sizes are selected through the sand retention test (SRT) to filter an unacceptable amount of sand produced from oil and gas wells. SRTs have been modelled in the laboratory using computer simulation to replicate experimental conditions and ensure that the selected screens are suitable for selected reservoirs. However, the SRT experimental setups and result analyses are not standardized. A few changes made to the experimental setup can cause a huge variation in results, leading to different plugging performance and sand retention analysis. Besides, conducting many laboratory experiments is expensive and time-consuming. Since the application of CNN in the petroleum industry attained promising results for both classification and regression problems, this method is proposed on SRT to reduce the time, cost, and effort to run the laboratory test by predicting the plugging performance and sand production. The application of deep learning has yet to be imposed in SRT. Therefore, in this study, a deep learning model using a one-dimensional convolutional neural network (1D-CNN) with adaptive moment estimation is developed to model the SRT with the aim of classifying plugging sign (screen plug, the screen does not plug) as well as to predict sand production and retained permeability using a varying sand distribution, SAS, screen slot size, and sand concentration as inputs. The performance of the proposed 1D-CNN model for the slurry test shows that the prediction of retained permeability and the classification of plugging sign achieved robust accuracy with more than a 90% value of R2, while the prediction of sand production achieved 77% accuracy. In addition, the model for the sand pack test achieved 84% accuracy in predicting sand production. For comparative model performance, gradient boosting (GB), K-nearest neighbor (KNN), random forest (RF), and support vector machine (SVM) were also modelled on the same datasets. The results showed that the proposed 1D-CNN model outperforms the other four machine learning models for both SRT tests in terms of prediction accuracy.

The intra-pulse modulation of radar emitter signals is a key feature for analyzing radar systems. Traditional methods which require a tremendous amount of prior knowledge are insufficient to accurately classify the intra-pulse modulations. Recently, deep learning-based methods, especially convolutional neural networks (CNN), have been used in classification of intra-pulse modulation of radar emitter signals. However, those two-dimensional CNN-based methods, which require dimensional transformation of the original sampled signals in the stage of data preprocessing, are resource-consuming and poorly feasible. In order to solve these problems, we proposed a one-dimensional selective kernel convolutional neural network (1-D SKCNN) to accurately classify the intra-pulse modulation of radar emitter signals. Compared with other previous methods described in the literature, the data preprocessing of the proposed method merely includes zero-padding, fast Fourier transformation (FFT) and amplitude normalization, which is much faster and easier to achieve. The experimental results indicate that the proposed method has the advantages of faster speed in data preprocessing and higher accuracy in intra-pulse modulation classification of radar emitter signals.

The increasing number of Industrial Internet of Things (IIoT) devices presents hackers with a huge attack surface from which to conduct possibly more destructive assaults. Numerous of these assaults were successful as a consequence of the hackers' inventive and unique approaches. Due to the unpredictability of network technology and attack attempts, traditional Deep Learning (DL) approaches are made ineffective. The accuracy of DL algorithms has been shown across a range of scientific fields. The Convolutional Neural Network Model (CNN) technique is an ideal alternative for anomaly detection and classification since it can automatically classify incoming data and conduct calculations faster. We introduce Honeypot Early Intrusion Detection System (HEIDS) that detects anomalies and classifies intrusions in IIoT networks using DL methods. The model is designed to detect adversaries attempting to attack IIoT Industrial Control Systems (ICS). The suggested model is implemented using One-dimensional convolutional neural networks (CNN 1D). Due to the importance of industrial services, this system contributes to the enhancement of information security detection in the industrial domain. Finally, this research gives an assessment of the HEIDS datasets of IIoT, utilizing the CNN 1D technique. With this approach, the prediction accuracy of 1.0 was reached.

Human Activity Recognition (HAR) aims to identify the actions performed by humans using signals collected from various sensors embedded in mobile devices. In recent years, deep learning techniques have further improved HAR performance on several benchmark datasets. In this paper, we propose one-dimensional Convolutional Neural Network (1D CNN) for HAR that employs a divide and conquer-based classifier learning coupled with test data sharpening. Our approach leverages a two-stage learning of multiple 1D CNN models; we first build a binary classifier for recognizing abstract activities, and then build two multi-class 1D CNN models for recognizing individual activities. We then introduce test data sharpening during prediction phase to further improve the activity recognition accuracy. While there have been numerous researches exploring the benefits of activity signal denoising for HAR, few researches have examined the effect of test data sharpening for HAR. We evaluate the effectiveness of our approach on two popular HAR benchmark datasets, and show that our approach outperforms both the two-stage 1D CNN-only method and other state of the art approaches.

The chlorophyll fluorescence parameter Fv/Fm is significant in abiotic plant stress. Current acquisition methods must deal with the dark adaptation of plants, which cannot achieve rapid, real-time, and high-throughput measurements. However, increased inputs on different genotypes based on hyperspectral model recognition verified its capabilities of handling large and variable samples. Fv/Fm is a drought tolerance index reflecting the best drought tolerant cotton genotype. Therefore, Fv/Fm hyperspectral prediction of different cotton varieties, and drought tolerance evaluation, are worth exploring. In this study, 80 cotton varieties were studied. The hyperspectral cotton data were obtained during the flowering, boll setting, and boll opening stages under normal and drought stress conditions. Next, One-dimensional convolutional neural networks (1D-CNN), Categorical Boosting (CatBoost), Light Gradient Boosting Machines (LightBGM), eXtreme Gradient Boosting (XGBoost), Decision Trees (DT), Random Forests (RF), Gradient elevation decision trees (GBDT), Adaptive Boosting (AdaBoost), Extra Trees (ET), and K-Nearest Neighbors (KNN) were modeled with F v /F m. The Savitzky-Golay + 1D-CNN model had the best robustness and accuracy (RMSE = 0.016, MAE = 0.009, MAPE = 0.011). In addition, the F v /F m prediction drought tolerance coefficient and the manually measured drought tolerance coefficient were similar. Therefore, cotton varieties with different drought tolerance degrees can be monitored using hyperspectral full band technology to establish a 1D-CNN model. This technique is non-destructive, fast and accurate in assessing the drought status of cotton, which promotes smart-scale agriculture.The chlorophyll fluorescence parameter Fv/Fm is significant in abiotic plant stress. Current acquisition methods must deal with the dark adaptation of plants, which cannot achieve rapid, real-time, and high-throughput measurements. However, increased inputs on different genotypes based on hyperspectral model recognition verified its capabilities of handling large and variable samples. Fv/Fm is a drought tolerance index reflecting the best drought tolerant cotton genotype. Therefore, Fv/Fm hyperspectral prediction of different cotton varieties, and drought tolerance evaluation, are worth exploring. In this study, 80 cotton varieties were studied. The hyperspectral cotton data were obtained during the flowering, boll setting, and boll opening stages under normal and drought stress conditions. Next, One-dimensional convolutional neural networks (1D-CNN), Categorical Boosting (CatBoost), Light Gradient Boosting Machines (LightBGM), eXtreme Gradient Boosting (XGBoost), Decision Trees (DT), Random Forests (RF), Gradient elevation decision trees (GBDT), Adaptive Boosting (AdaBoost), Extra Trees (ET), and K-Nearest Neighbors (KNN) were modeled with F v /F m. The Savitzky-Golay + 1D-CNN model had the best robustness and accuracy (RMSE = 0.016, MAE = 0.009, MAPE = 0.011). In addition, the F v /F m prediction drought tolerance coefficient and the manually measured drought tolerance coefficient were similar. Therefore, cotton varieties with different drought tolerance degrees can be monitored using hyperspectral full band technology to establish a 1D-CNN model. This technique is non-destructive, fast and accurate in assessing the drought status of cotton, which promotes smart-scale agriculture.

A lost-in-space star identification algorithm based on a one-dimensional Convolutional Neural Network (1D CNN) is proposed. The lost-in-space star identification aims to identify stars observed with corresponding catalog stars when there is no prior attitude information. With the help of neural networks, the robustness and the speed of the star identification are improved greatly. In this paper, a modified log-Polar mapping is used to constructed rotation-invariant star patterns. Then a 1D CNN is utilized to classify the star patterns associated with guide stars. In the 1D CNN model, a global average pooling layer is used to replace fully-connected layers to reduce the number of parameters and the risk of overfitting. Experiments show that the proposed algorithm is highly robust to position noise, magnitude noise, and false stars. The identification accuracy is 98.1% with 5 pixels position noise, 97.4% with 5 false stars, and 97.7% with 0.5 Mv magnitude noise, respectively, which is significantly higher than the identification rate of the pyramid, optimized grid and modified log-polar algorithms. Moreover, the proposed algorithm guarantees a reliable star identification under dynamic conditions. The identification accuracy is 82.1% with angular velocity of 10 degrees per second. Furthermore, its identification time is as short as 32.7 miliseconds and the memory required is about 1920 kilobytes. The algorithm proposed is suitable for current embedded systems.

Debris flows have been always a serious problem in the mountain areas. Research on the assessment of debris flows susceptibility (DFS) is useful for preventing and mitigating debris flow risks. The main purpose of this work is to study the DFS in the Shigatse area of Tibet, by using machine learning methods, after assessing the main triggering factors of debris flows. Remote sensing and geographic information system (GIS) are used to obtain datasets of topography, vegetation, human activities and soil factors for local debris flows. The problem of debris flow susceptibility level imbalances in datasets is addressed by the Borderline-SMOTE method. Five machine learning methods, i.e., back propagation neural network (BPNN), one-dimensional convolutional neural network (1D-CNN), decision tree (DT), random forest (RF), and extreme gradient boosting (XGBoost) have been used to analyze and fit the relationship between debris flow triggering factors and occurrence, and to evaluate the weight of each triggering factor. The ANOVA and Tukey HSD tests have revealed that the XGBoost model exhibited the best mean accuracy (0.924) on ten-fold cross-validation and the performance was significantly better than that of the BPNN (0.871), DT (0.816), and RF (0.901). However, the performance of the XGBoost did not significantly differ from that of the 1D-CNN (0.914). This is also the first comparison experiment between XGBoost and 1D-CNN methods in the DFS study. The DFS maps have been verified by five evaluation methods: Precision, Recall, F1 score, Accuracy and area under the curve (AUC). Experiments show that the XGBoost has the best score, and the factors that have a greater impact on debris flows are aspect, annual average rainfall, profile curvature, and elevation.

As the real electromagnetic environment grows complex and the quantity of radar signals turns massive, traditional methods, which require a large amount of prior knowledge, are time-consuming and ineffective for radar emitter signal recognition. In recent years, convolutional neural network (CNN) has shown its superiority in recognition so that experts have applied it in radar signal recognition. However, in the field of radar emitter signal recognition, the data are usually one-dimensional (1-D), which takes more time and storage space than by using the original two-dimensional CNN model directly. Moreover, the features extracted from convolutional layers are redundant so that the recognition accuracy is low. In order to solve these problems, this paper proposes a novel one-dimensional convolutional neural network with an attention mechanism (CNN-1D-AM) to extract more discriminative features and recognize the radar emitter signals. In this method, features of the given 1-D signal sequences are extracted directly by the 1-D convolutional layers and are weighted in accordance with their importance to recognition by the attention unit. The experiments based on seven different radar emitter signals indicate that the proposed CNN-1D-AM has the advantages of high accuracy and superior performance in radar emitter signal recognition.