Explore the vast range of titles available.

In object-based image analysis (OBIA), the appropriate parametrization of segmentation algorithms is crucial for obtaining satisfactory image classification results. One of the ways this can be done is by unsupervised segmentation parameter optimization (USPO). A popular USPO method does this through the optimization of a “global score” (GS), which minimizes intrasegment heterogeneity and maximizes intersegment heterogeneity. However, the calculated GS values are sensitive to the minimum and maximum ranges of the candidate segmentations. Previous research proposed the use of fixed minimum/maximum threshold values for the intrasegment/intersegment heterogeneity measures to deal with the sensitivity of user-defined ranges, but the performance of this approach has not been investigated in detail. In the context of a remote sensing very-high-resolution urban application, we show the limitations of the fixed threshold approach, both in a theoretical and applied manner, and instead propose a novel solution to identify the range of candidate segmentations using local regression trend analysis. We found that the proposed approach showed significant improvements over the use of fixed minimum/maximum values, is less subjective than user-defined threshold values and, thus, can be of merit for a fully automated procedure and big data applications.

Background Pigmented skin lesions (PSLs) pose medical and esthetic challenges for those affected. PSLs can cause skin cancers, particularly melanoma, which can be life‐threatening. Detecting and treating melanoma early can reduce mortality rates. Dermoscopic imaging offers a noninvasive and cost‐effective technique for examining PSLs. However, the lack of standardized colors, image capture settings, and artifacts makes accurate analysis challenging. Computer‐aided diagnosis (CAD) using deep learning models, such as convolutional neural networks (CNNs), has shown promise by automatically extracting features from medical images. Nevertheless, enhancing the CNN models' performance remains challenging, notably concerning sensitivity. Materials and methods In this study, we aim to enhance the classification performance of selected pretrained CNNs. We use the 2019 ISIC dataset, which presents eight disease classes. To achieve this goal, two methods are applied: resolution of the dataset imbalance challenge through augmentation and optimization of the training hyperparameters via Bayesian tuning. Results The performance improvement was observed for all tested pretrained CNNs. The Inception‐V3 model achieved the best performance compared to similar results, with an accuracy of 96.40% and an AUC of 0.98. Conclusion According to the study, classification performance was significantly enhanced by augmentation and Bayesian hyperparameter tuning.

To classify Very-High-Resolution (VHR) imagery, Geographic Object Based Image Analysis (GEOBIA) is the most popular method used to produce high quality Land-Use/Land-Cover maps. A crucial step in GEOBIA is the appropriate parametrization of the segmentation algorithm prior to the classification. However, little effort has been made to automatically optimize GEOBIA algorithms in an unsupervised and spatially meaningful manner. So far, most Unsupervised Segmentation Parameter Optimization (USPO) techniques, assume spatial stationarity for the whole study area extent. This can be questionable, particularly for applications in geographically large and heterogeneous urban areas. In this study, we employed a novel framework named Spatially Partitioned Unsupervised Segmentation Parameter Optimization (SPUSPO), which optimizes segmentation parameters locally rather than globally, for the Sub-Saharan African city of Ouagadougou, Burkina Faso, using WorldView-3 imagery (607 km2). The results showed that there exists significant spatial variation in the optimal segmentation parameters suggested by USPO across the whole scene, which follows landscape patterns—mainly of the various built-up and vegetation types. The most appropriate automatic spatial partitioning method from the investigated techniques, was an edge-detection cutline algorithm, which achieved higher classification accuracy than a global optimization, better predicted built-up regions, and did not suffer from edge effects. The overall classification accuracy using SPUSPO was 90.5%, whilst the accuracy from undertaking a traditional USPO approach was 89.5%. The differences between them were statistically significant (p < 0.05) based on a McNemar’s test of similarity. Our methods were validated further by employing a segmentation goodness metric, Area Fit Index (AFI)on building objects across Ouagadougou, which suggested that a global USPO was more over-segmented than our local approach. The mean AFI values for SPUSPO and USPO were 0.28 and 0.36, respectively. Finally, the processing was carried out using the open-source software GRASS GIS, due to its efficiency in raster-based applications.

Severe space weather produced by disturbed conditions on the Sun results in harmful effects both for humans in space and in high‐latitude flights, and for technological systems such as spacecraft or communications. Also, geomagnetically induced currents (GICs) flowing on long ground‐based conductors, such as power networks, potentially threaten critical infrastructures on Earth. The first step in developing an alarm system against GICs is to forecast them. This is a challenging task given the highly non‐linear dependencies of the response of the magnetosphere to these perturbations. In the last few years, modern machine‐learning models have shown to be very good at predicting magnetic activity indices. However, such complex models are on the one hand difficult to tune, and on the other hand they are known to bring along potentially large prediction uncertainties which are generally difficult to estimate. In this work we aim at predicting the SYM‐H index characterizing geomagnetic storms multiple‐hour ahead, using public interplanetary magnetic field (IMF) data from the Sun‐Earth L1 Lagrange point and SYM‐H data. We implement a type of machine‐learning model called long short‐term memory (LSTM) network. Our scope is to estimate the prediction uncertainties coming from a deep‐learning model in the context of forecasting the SYM‐H index. These uncertainties will be essential to set reliable alarm thresholds. The resulting uncertainties turn out to be sizable at the critical stages of the geomagnetic storms. Our methodology includes as well an efficient optimization of important hyper‐parameters of the LSTM network and robustness tests.

In the big data era, traditional data mining technology cannot meet the requirements of massive data processing with the background of intelligent manufacturing. Aiming at insufficient computing power and low efficiency in mining process, this paper proposes a improved K -means clustering algorithm based on the concept of distributed clustering in cloud computing environment. The improved algorithm (T. K -means) is combined with MapReduce computing framework of Hadoop platform to realize parallel computing, so as to perform processing tasks of massive data. In order to verify the practical performance of T. K -means algorithm, taking machining data of milling Ti-6Al-4V alloy as the mining object. The mapping relationship among cutting parameters, surface roughness, and material removal rate is mined, and the optimized value for cutting parameters is obtained. The results show that T. K -means algorithm can be used to mine the optimal cutting parameters, so that the best surface roughness can be obtained in milling Ti-6Al-4V titanium alloy.

Parameters often take key roles in determining the accuracy of algorithms, logics, and models for practical applications. Previously, we have proposed a general-purpose parameter optimization algorithm, and studied its applications in various practical problems. This algorithm optimizes the parameter values by repeating small changes of them based on a local search method with hill-climbing capabilities. In this paper, we present three diverse applications of this algorithm to show the versatility and effectiveness. The first application is the fingerprint-based indoor localization system using IEEE802.15.4 devices called FILS15.4 that can detect the location of a user in an indoor environment. It is shown that the number of fingerprints for each detection point, the fingerprint values, and the detection interval are optimized together, and the average detection accuracy exceeds 99%. The second application is the human face contour approximation model that is described by a combination of half circles, line segments, and a quadratic curve. It is shown that the simple functions can well approximate the face contour of various persons by optimizing the center coordinates, radii, and coefficients. The third application is the computational fluid dynamic (CFD) simulation to estimate temperature changes in a room. It is shown that the thermal conductivity is optimized to make the average temperature difference between the estimated and measured 0.22∘C.

The ambitious spread of fuel cell usage is facing the aging problem, which has a significant impact on the cells’ output power. Therefore, it is necessary to develop reliable techniques that are capable of accurately characterizing the cell throughout its life. This paper proposes an adaptive parameter estimation technique to develop a robust proton exchange membrane fuel cell (PEMFC) model over its lifespan. This is useful for accurate monitoring, analysis, design, and control of the PEMFC and increasing its life. For this purpose, fair comparisons of nine recent optimization algorithms were made by implementing them for a typical quasi-empirical PEMFC model estimation problem. Investigating the best competitors relied on two conceptual factors, the solution accuracy and computational burden (as a novel assessment factor in this study). The computational burden plays a great role in accelerating the model parameters’ update process. The proposed techniques were applied to five commercial PEMFCs. Moreover, a necessary statistical analysis of the results was performed to make a solid comparison with the competitors. Among them, the proposed coot-bird-algorithm (CBO)-based technique achieved a superior and balanced performance. It surpassed the closest competitors by a difference of 16.01% and 62.53% in the accuracy and computational speed, respectively.

The design of blast-resistant vehicle provides an appropriate level of protection for the vehicle and occupants against the serious threat from landmine and improvised explosive devices (IED). Mathematically, the objective of this research is to optimize the configuration of light armored vehicle installed multilayer honeycomb sandwich structures (MHSS), shock-mitigating seat and seat belt, and cope with the challenge of highly computational cost on dealing with the large scale, multi-parameter, nonlinear and fluid-structure interaction simulation models. Multi material Arbitrary Lagrangian-Eulerian (MM-ALE) method is used to obtain the high-precision vehicle responses and occupant injuries under blast wave. The baseline model validated by the blast test is built, and the optimization model for blast-resistant vehicle is defined. Then, identifying important design parameters accurately is so difficultly when sufficient samples are not provided due to the expensive computational cost, and it’s inappropriate to screen parameters with inconsistent sequence of variable sensitivities for occupant injuries. Factor analysis based multi-parameter optimization (FAMO) is proposed to reduce the computational cost on improving the blast resistant performance of vehicle. The normal-boundary intersection (NBI) and the R 2 metric are used to obtain optimal compromise solution which noticeable reduced the peak value of occupant injuries, and the physical insights which drive the optimal solution to reduce the occupant injuries is analyzed. Additional studies are conducted on comparing between proposed algorithm and the conventional algorithm, including shape of the Pareto front, optimal compromise solution, design variables and responses.

Energy consumption in the manufacturing sector is becoming a very hot topic due to its significant ecological relevance, especially for energy intensive processes such as machining. Machining finds nowadays large application mainly due to its high performance, in terms of both surface finish and tolerances achievable; as an example this is the key technology in dies and molds production, largely used in the automotive and housewares sectors. Process optimization could be carried out using different strategies, as already proposed by many authors, such as by optimizing machining parameters or implementing alternative toolpath capable of reducing both machining time and energy consumption. Within this paper will be presented a novel approach that takes into account the product orientation within the working zone of the machine. Milling machines are usually non symmetric regarding the energy consumptions of the axes due to the different masses that have to be moved, hence product orientation could sensibly affect energy consumption in performing a toolpath. Optimizing product orientation has the advantage not to affect product quality and require no adjustment of machining parameters. An approach to model the machine power consumption and to optimize the workpiece orientation is presented together with the results of validation experiments.

Due to the strong intermittency of micro-resources, the poor grid-tied power quality, and the high generation-demand sensitivity in micro-grids, research into the control methods of micro-grid systems has always been a notable issue in the field of micro-grids. The inverter is the core control equipment at the primary control level of the micro-grid, and the key factors affecting its output performance can be divided into three categories: control methods, hardware configuration, and control parameter design. Taking the classical active and reactive power (P-Q) control structure and the three-phase, two-stage inverter topology model as an example, this paper designs a parameter for offline tuning, and an online self-tuning optimization method for an inverter control system based on the fruit fly optimization algorithm (FOA). By simulating and comparing the inverter controllers with non-optimized parameters in the same object and environment, the designed parameter tuning method is verified. Specifically, it improves the dynamic response speed of the inverter controller, reduces the steady-state error and oscillation, and enhances the dynamic response performance of the controller.