Explore the vast range of titles available.

We present a wearable device built on an Adafruit Circuit Playground Express (CPE) board and integrated with a photoplethysmographic (PPG) optical sensor for heart rate monitoring and multiple embedded sensors for medical applications—in particular, sleep physiological signal monitoring. Our device is portable and lightweight. Due to the microcontroller unit (MCU)-based architecture of the proposed device, it is scalable and flexible. Thus, with the addition of different plug-and-play sensors, it can be used in many applications in different fields. The innovation introduced in this study is that with additional sensors, we can determine whether there are intermediary variables that can be modified to improve our sleep monitoring algorithm. Additionally, although the proposed device has a relatively low cost, it achieves substantially improved performance compared to the commercially available Philips ActiWatch2 wearable device, which has been approved by the Food and Drug Administration (FDA). To assess the reliability of our device, we compared physiological sleep signals recorded simultaneously from volunteers using both our device and ActiWatch2. Motion and light detection data from our device were shown to be correlated to data simultaneously collected using the ActiWatch2, with correlation coefficients of 0.78 and 0.89, respectively. For 7 days of continuous data collection, there was only one instance of a false positive, in which our device detected a sleep interval, while the ActiWatch2 did not. The most important aspect of our research is the use of an open architecture. At the hardware level, general purpose input/output (GPIO), serial peripheral interface (SPI), integrated circuit (I2C), and universal asynchronous receiver-transmitter (UART) standards were used. At the software level, an object-oriented programming methodology was used to develop the system. Because the use of plug-and-play sensors is associated with the risk of adverse outcomes, such as system instability, this study heavily relied on object-oriented programming. Object-oriented programming improves system stability when hardware components are replaced or upgraded, allowing us to change the original system components at a low cost. Therefore, our device is easily scalable and has low commercialization costs. The proposed wearable device can facilitate the long-term tracking of physiological signals in sleep monitoring and related research. The open architecture of our device facilitates collaboration and allows other researchers to adapt our device for use in their own research, which is the main characteristic and contribution of this study.

Patients with respiratory or cardiovascular diseases often experience higher rates of hospital readmission due to compromised heart-lung function and significant clinical symptoms. Effective measures such as discharge planning, case management, home telemonitoring follow-up, and patient education can significantly mitigate hospital readmissions. This study aimed to determine the efficacy of home telemonitoring follow-up in reducing hospital readmissions, emergency department (ED) visits, and total hospital days for high-risk postdischarge patients. This prospective cohort study was conducted between July and October 2021. High-risk patients were screened for eligibility and enrolled in the study. The intervention involved implementing home digital monitoring to track patient health metrics after discharge, with the aim of reducing hospital readmissions and ED visits. High-risk patients or their primary caregivers received education on using communication measurement tools and recording and uploading data. Before discharge, patients were familiarized with these tools, which they continued to use for 4 weeks after discharge. A project manager monitored the daily uploaded health data, while a weekly video appointment with the program coordinator monitored the heart and breathing sounds of the patients, tracked health status changes, and gathered relevant data. Care guidance and medical advice were provided based on symptoms and physiological signals. The primary outcomes of this study were the number of hospital readmissions and ED visits within 3 and 6 months after intervention. The secondary outcomes included the total number of hospital days and patient adherence to the home monitoring protocol. Among 41 eligible patients, 93% (n=38) were male, and 46% (n=19) were aged 41-60 years, while 46% (n=19) were aged 60 years or older. The study revealed that home digital monitoring significantly reduced hospitalizations, ED visits, and total hospital stay days at 3 and 6 months after intervention. At 3 months after intervention, average hospitalizations decreased from 0.45 (SD 0.09) to 0.19 (SD 0.09; P=.03), and average ED visits decreased from 0.48 (SD 0.09) to 0.06 (SD 0.04; P<.001). Average hospital days decreased from 6.61 (SD 2.25) to 1.94 (SD 1.15; P=.08). At 6 months after intervention, average hospitalizations decreased from 0.55 (SD 0.11) to 0.23 (SD 0.09; P=.01), and average ED visits decreased from 0.55 (SD 0.11) to 0.23 (SD 0.09; P=.02). Average hospital days decreased from 7.48 (SD 2.32) to 6.03 (SD 3.12; P=.73). By integrating home telemonitoring with regular follow-up, our research demonstrates a viable approach to reducing hospital readmissions and ED visits, ultimately improving patient outcomes and reducing health care costs. The practical application of telemonitoring in a real-world setting showcases its potential as a scalable solution for chronic disease management.

Resting-state fMRIs (rs-fMRIs) have been widely used for investigation of diverse brain functions, including brain cognition. The rs-fMRI has easily elucidated rs-fMRI metrics, such as the fractional amplitude of low-frequency fluctuation (fALFF), regional homogeneity (ReHo), voxel-mirrored homotopic connectivity (VMHC), and degree centrality (DC). To increase the applicability of these metrics, higher reliability is required by reducing confounders that are not related to the functional connectivity signal. Many previous studies already demonstrated the effects of physiological artifact removal from rs-fMRI data, but few have evaluated the effect on rs-fMRI metrics. In this study, we examined the effect of physiological noise correction on the most common rs-fMRI metrics. We calculated the intraclass correlation coefficient of repeated measurements on parcellated brain areas by applying physiological noise correction based on the RETROICOR method. Then, we evaluated the correction effect for five rs-fMRI metrics for the whole brain: FC, fALFF, ReHo, VMHC, and DC. The correction effect depended not only on the brain region, but also on the metric. Among the five metrics, the reliability in terms of the mean value of all ROIs was significantly improved for FC, but it deteriorated for fALFF, with no significant differences for ReHo, VMHC, and DC. Therefore, the decision on whether to perform the physiological correction should be based on the type of metric used.

Deep Learning (DL), a successful promising approach for discriminative and generative tasks, has recently proved its high potential in 2D medical imaging analysis; however, physiological data in the form of 1D signals have yet to be beneficially exploited from this novel approach to fulfil the desired medical tasks. Therefore, in this paper we survey the latest scientific research on deep learning in physiological signal data such as electromyogram (EMG), electrocardiogram (ECG), electroencephalogram (EEG), and electrooculogram (EOG). We found 147 papers published between January 2018 and October 2019 inclusive from various journals and publishers. The objective of this paper is to conduct a detailed study to comprehend, categorize, and compare the key parameters of the deep-learning approaches that have been used in physiological signal analysis for various medical applications. The key parameters of deep-learning approach that we review are the input data type, deep-learning task, deep-learning model, training architecture, and dataset sources. Those are the main key parameters that affect system performance. We taxonomize the research works using deep-learning method in physiological signal analysis based on: (1) physiological signal data perspective, such as data modality and medical application; and (2) deep-learning concept perspective such as training architecture and dataset sources.

Pain is a subjective feeling; it is a sensation that every human being must have experienced all their life. Yet, its mechanism and the way to immune to it is still a question to be answered. This review presents the mechanism and correlation of pain and stress, their assessment and detection approach with medical devices and wearable sensors. Various physiological signals (i.e., heart activity, brain activity, muscle activity, electrodermal activity, respiratory, blood volume pulse, skin temperature) and behavioral signals are organized for wearables sensors detection. By reviewing the wearable sensors used in the healthcare domain, we hope to find a way for wearable healthcare-monitoring system to be applied on pain and stress detection. Since pain leads to multiple consequences or symptoms such as muscle tension and depression that are stress related, there is a chance to find a new approach for chronic pain detection using daily life sensors or devices. Then by integrating modern computing techniques, there is a chance to handle pain and stress management issue.

Affect recognition is an interdisciplinary research field bringing together researchers from natural and social sciences. Affect recognition research aims to detect the affective state of a person based on observables, with the goal to, for example, provide reasoning for the person’s decision making or to support mental wellbeing (e.g., stress monitoring). Recently, beside of approaches based on audio, visual or text information, solutions relying on wearable sensors as observables, recording mainly physiological and inertial parameters, have received increasing attention. Wearable systems enable an ideal platform for long-term affect recognition applications due to their rich functionality and form factor, while providing valuable insights during everyday life through integrated sensors. However, existing literature surveys lack a comprehensive overview of state-of-the-art research in wearable-based affect recognition. Therefore, the aim of this paper is to provide a broad overview and in-depth understanding of the theoretical background, methods and best practices of wearable affect and stress recognition. Following a summary of different psychological models, we detail the influence of affective states on the human physiology and the sensors commonly employed to measure physiological changes. Then, we outline lab protocols eliciting affective states and provide guidelines for ground truth generation in field studies. We also describe the standard data processing chain and review common approaches related to the preprocessing, feature extraction and classification steps. By providing a comprehensive summary of the state-of-the-art and guidelines to various aspects, we would like to enable other researchers in the field to conduct and evaluate user studies and develop wearable systems.

Emotion recognition based on physiological signals has been a hot topic and applied in many areas such as safe driving, health care and social security. In this paper, we present a comprehensive review on physiological signal-based emotion recognition, including emotion models, emotion elicitation methods, the published emotional physiological datasets, features, classifiers, and the whole framework for emotion recognition based on the physiological signals. A summary and comparation among the recent studies has been conducted, which reveals the current existing problems and the future work has been discussed.

Flexible wearable strain sensors based on laser-induced graphene (LIG) have attracted significant interest due to their simple preparation process, three-dimensional porous structure, excellent electromechanical characteristics, and remarkable mechanical robustness. In this study, we demonstrated that LIG with various defects could be prepared on the surface of polyimide (PI) film, patterned in a single step by adjusting the scanning speed while maintaining a constant laser power of 12.4 W, and subjected to two repeated scans under ambient air conditions. The results indicated that LIG produced at a scanning speed of 70 mm/s exhibited an obvious stacked honeycomb micropore structure, and the flexible strain sensor fabricated with this material demonstrated stable resistance. The sensor exhibited high sensitivity within a low strain range of 0.4–8.0%, with the gauge factor (GF) reaching 107.8. The sensor demonstrated excellent stability and repeatable response at a strain of 2% after approximately 1000 repetitions. The flexible wearable LIG-based sensor with a serpentine bending structure could be used to detect various physiological signals, including pulse, finger bending, back of the hand relaxation and gripping, blinking eyes, smiling, drinking water, and speaking. The results of this study may serve as a reference for future applications in health monitoring, medical rehabilitation, and human–computer interactions.