Explore the vast range of titles available.

Plastic film mulching (PFM) technology plays an important role in agricultural production in “drought and cold” regions, and macroplastics pollution in farmland has become a major concern affecting the sustainable development of regional agricultural production. However, there remains a lack of research on the effects of film application and macroplastics characteristics on soil nutrients in farmland. In this study, the characteristics of plastic film application and macroplastics, and their effect on soil nutrients in typical plastic film cropland in northern Xinjiang were explored by field research and a review of the relevant literature. It was found that the average annual growth rate was higher in areas where the amount, usage intensity, and proportion of plastic film were lower. The amount of plastic film input was a key factor affecting the amount of macroplastics. The macroplastics amount of plastic film was positively correlated with soil organic carbon content and negatively correlated with soil available phosphorus; however, it had no effect on soil available potassium. It is necessary to take immediate action regarding the characteristics of plastic film application and macroplastics and the impact of macroplastics on soil nutrients, in order to establish a response to the dual challenges of food security and sustainable agricultural development in terms of plastic film pollution prevention and control measures.

Clubroot, caused by Plasmodiophora brassicae, is a destructive soil-borne disease significantly harming global Brassica crop production. This study employed the Williams and European Clubroot Differential (ECD) and Williams systems to identify the pathotypes of P. brassicae collected from Hangzhou City, Yuhang District and Quzhou City, Kaihua County in Zhejiang Province. Greenhouse and field trials were conducted to evaluate the effects of plastic film covering and four chemical agents on the growth parameters and clubroot severity of the Chinese cabbage cultivar ‘Granaat’. Potential treatment mechanisms on clubroot were explored through a qPCR analysis of the resting spore density and pH measurement of the soil. Furthermore, treatment with 1-napthaleneacetic acid (NAA), a synthetic auxin, was also evaluated for its potential role in suppressing clubroot. The results indicate that the pathotypes of P. brassicae in the two districts were P1, ECD20/31/12, and P3, ECD20/15/4. While an individual application of plastic film covering could not effectively control clubroot, calcium cyanamid, dazomet and ammonium bicarbonate demonstrated significant efficacy in its management. These three agents significantly reduced the resting spore density in the soil, with calcium cyanamid and ammonium bicarbonate also increasing soil alkalinity. Additionally, ammonium bicarbonate promotes lateral root development in ‘Granaat,’ helping infected plants access adequate water and nutrients. However, NAA exhibited no efficacy in clubroot control. Therefore, sustained lateral root development is crucial for effectively resisting P. brassicae invasion. Considering application costs and environmental friendliness, we propose the field application of ammonium bicarbonate as the optimal method for clubroot disease management in Zhejiang Province.

The persistent consumption of citrus fruit mainly depends on its sweet–sour taste as well as pulp texture. To date, the simple facility by covering plastic film just over trees is commonly used in different citrus species for harvest time extension and quality improvement. In this study, the effect of covering trees of Citrus reticulata cv. Kinokuni with plastic films was investigated. Results indicated that simply covering plastic film over trees significantly decreased the soil water content, the light intensity, and then the photosynthetic rate, however, moderately increased the internal average temperature of 0–3 °C. Moreover, it significantly facilitated soluble sugar accumulation, increased water soluble pectin content, and decreased protopectin content. Investigating transcript profile showed that only 351 gene transcripts were significantly influenced by covering plastic film. Interestingly, most differently expressed genes (DEGs) were involved in carbohydrate and cell wall metabolisms except some DEGs were related to signal transduction and environmental adaption. Taken together, covering plastic film over trees comprehensively modified the internal environmental condition and improved the fruit sweetness and mastication trait by promoting soluble sugar accumulation, increasing water soluble pectin content, and decreasing protopectin content through the alteration of transcript level.

The generation of agro-industrial residues represents an environmental challenge and an opportunity for their valorization within a circular economy framework. In this study, Agave salmiana bagasse residues were evaluated as a reinforcing material for developing bioplastics made from maize starch (polymer matrix). Maguey bagasse was collected, ground and sieved to particle sizes below 200 μm and incorporated into bioplastic formulations at different content levels. Five bioplastic films (M1–M5) were obtained and characterized regarding their physical, chemical, mechanical, thermal, and morphological properties. The evaluated parameters included density, color (CIE Lab*), moisture content, water absorption, FTIR analysis, tensile properties, thermal behavior, and surface morphology via SEM. The results showed significant differences among the bioplastic formulations. The moisture content ranged from 7.15% to 10.57%, while water absorption after 24 h reached values of up to 65% for the formulation with the highest bagasse content. Mechanical and thermal analyses indicated that the incorporation of maguey bagasse influenced the structural performance of the bioplastics, while SEM observations revealed changes in surface morphology associated with fiber incorporation. These findings demonstrate the potential of A. salmiana bagasse as a reinforcing agent in starch-based bioplastics, contributing to the development of sustainable materials. The results support their potential as a biodegradable material with exploratory application in an agricultural system.

In the framework of precision viticulture, satellite data have been demonstrated to significantly support many tasks. Specifically, they enable the rapid, large-scale estimation of some viticultural parameters like vine stem water potential (Ψstem) and intercepted solar radiation (ISR) that traditionally require time-consuming ground surveys. The practice of covering table grape vineyards with plastic films introduces an additional challenge for estimation, potentially affecting vine spectral responses and, consequently, the accuracy of estimations from satellites. This study aimed to address these challenges with a special focus on the exploitation of Sentinel-2 Level 2A and meteorological data to monitor a plastic-covered vineyard in Southern Italy. Estimates of Ψstem and ISR were obtained using different algorithms, namely, Ordinary Least Square (OLS), Multivariate Linear Regression (MLR), and machine learning (ML) techniques, which rely on Random Forest Regression, Support Vector Regression, and Partial Least Squares. The results proved that, despite the potential spectral interference from the plastic coverings, ISR and Ψstem can be locally estimated with a satisfying accuracy. In particular, (i) the OLS regression-based approach showed a good performance in providing accurate ISR estimates using the near-infrared spectral bands (RMSE < 8%), and (ii) the MLR and ML algorithms could estimate both the ISR and vine water status with a higher accuracy (RMSE < 7 for ISR and RMSE < 0.14 MPa for Ψstem). These results encourage the adoption of medium–high resolution multispectral satellite imagery for deriving satisfying estimates of key crop parameters even in anomalous situations like the ones where plastic films cover the monitored vineyard, thus marking a significant advancement in precision viticulture.

Planting potatoes through plastic film with incomplete or excessive soil coverage over seed holes significantly impairs yield. Existing covering methods rely solely on mechanical transmissions, leading to bulky and inconsistent soil coverage of the seed holes. This paper reports an innovative method using a precise soil covering device based on the YOLOv4-tiny real-time object detection system to accurately identify potato plastic film holes and cover them with soil. The system adopts a lightweight and high-precision detection scheme, balancing increased network depth with reduced computation. It can identify holes in the plastic film in real-time and with high accuracy. To verify the effectiveness of YOLOv4-tiny real-time object detection system, a precise soil covering device based on this detection system has been designed and applied to a double crank multi-rod hill-drop planter. Field tests revealed that the system's average accuracy rate for detecting holes is approximately 98%, with an average processing time of 15.15 ms per frame. This fast and accurate performance, combined with the device's robust real-time operation and anti-interference capabilities during soil covering, effectively reduce the problems of soil cover omission and repeated covering caused by existing mechanical transmission methods. The findings reported in this paper are valuable for the development of autonomous potato plastic film precise soil covering devices for commercial use.

This study compared and analyzed changes in the microclimate and thermal environment inside single-span greenhouses covered with a single layer of plastic film, polycarbonate (PC), and glass. The results of the experiment show that the PC-covered greenhouse was the most favorable for managing the nighttime heating effect during the cold season. However, the glass-covered greenhouse was found to be the most favorable for managing the cooling effect during the hot season. Although the plastic-covered greenhouse was inexpensive and easy to install, the air temperature inside varied significantly, and it was difficult to control its indoor environment. The thermal load leveling values showed that the PC-covered greenhouse had the lowest variation, confirming its superiority in terms of environmental control and energy savings. In terms of the overall heat transfer, heat was generally transferred from the interior to the exterior of the greenhouses. In the plastic-covered greenhouse, however, heat was transferred in the opposite direction at night due to the influence of radiant cooling. The occurrence of the minimum and maximum heat transfer values had a tendency similar to that of the occurrence of the minimum and maximum air temperatures inside the greenhouses.

Water shortage threatens agricultural sustainability in many arid and semiarid areas of the world. It is unknown whether improved water conservation practices can be developed to alleviate this issue while increasing crop productivity. In this study, we developed a “double mulching” system, i.e., plastic film coupled with straw mulch, integrated together with intensified strip intercropping. We determined (i) the responses of soil evaporation and moisture conservation to the integrated double mulching system and (ii) the change of soil temperature during key plant growth stages under the integrated systems. Experiments were carried out in northwest China in 2009 to 2011. Results show that wheat-maize strip intercropping in combination with plastic film and straw covering on the soil surface increased soil moisture (mm) by an average of 3.8 % before sowing, 5.3 % during the wheat and maize co-growth period, 4.4 % after wheat harvest, and 4.9 % after maize harvest, compared to conventional practice (control). The double mulching decreased total evapotranspiration of the two intercrops by an average of 4.6 % ( P  < 0.05), compared to control. An added feature was that the double mulching system decreased soil temperature in the top 10-cm depth by 1.26 to 1.31 °C in the strips of the cool-season wheat, and by 1.31 to 1.51 °C in the strips of the warm-season maize through the 2 years. Soil temperature of maize strips higher as 1.25 to 1.94 °C than that of wheat strips in the top 10-cm soil depth under intercropping with the double mulching system; especially higher as 1.58 to 2.11 °C under intercropping with the conventional tillage; this allows the two intercrops to grow in a well “collaborative” status under the double mulching system during their co-growth period. The improvement of soil moisture and the optimization of soil temperature for the two intercrops allow us to conclude that wheat-maize intensification with the double mulching system can be used as an effective farming model in alleviating water shortage issues experiencing in water shortage areas.

Manure is a primary source of methane (CH4) emissions into the atmosphere. A large proportion of CH4 from manure is emitted during storage, but this varies with storage methods. In this research, we tested whether covering a manure heap with plastic reduces CH4 emission during a short-term composting process. A static chamber method was used to detect the CH4 emission rate and the change of the physicochemical properties of cattle manure which was stored either uncovered (treatment UNCOVERED) or covered with plastic (treatment COVERED) for 30-day periods during the four seasons? The dry matter content of the COVERED treatment was significantly less than the UNCOVERED treatment (P < 0.01), and the C/N ratio of the COVERED treatment significantly greater than the UNCOVERED treatment (P > 0.05) under high temperature. In the UNCOVERED treatment, average daily methane (CH4) emissions were in the order summer > spring > autumn > winter. CH4 emissions were positively correlated with the temperature (R2 = 0.52, P < 0.01). Compared to the UNCOVERED treatment, the daily average CH4 emission rates from COVERED treatment manure were less in the first 19 days of spring, 13 days of summer, 10 days of autumn and 30 days of winter. In summary, covering the manure pile with plastic reduces the evaporation of water during storage; and in winter, long-term covering with plastic film reduces the CH4 emissions during the storage of manure.

A seeding machine for planting potatoes in double rows on large ridges in the cold and arid regions of northwest China was designed and built at Gansu Agricultural University. The machine is capable to achieve the integrated operations of ridge formation, mulching, hole punching, and the precise covering of holes on the film. The key components were analyzed and designed, and the link lengths of the crank film-piercing and hole-punching mechanism were refined using MATLAB R2022a software. The structures and working parameters of the film-piercing and hole-punching mechanism, the dual-opening punching and seeding mechanism, the ridge-forming and soil-covering mechanism, and the seed-casting device were designed. The dynamics of the ridge-forming and soil-covering were simulated using the discrete element method to capture the effects of different machine parameters on the soil covering operation. Field tests showed that the full soil-covering rate of film holes, the qualified rate of hole spacing, the hole misalignment rate, the degree of damage to the light-receiving surface of the film, and the qualified rate of sowing depth under the film were 94.8%, 87.6%, 4.3%, 33.4%, and 95.6%, respectively. These indicators met the requirements of industry standards, and the test results met the design and actual operation requirements, enabling the integrated operations of ridge formation, mulching, hole punching, sowing on the film, and the accurate soil covering of the holes.