Explore the vast range of titles available.

Bacterial infection and scar formation remain primary challenges in wound healing. To address these issues, we developed a decellularized pomelo peel (DPP) functionalized with an adhesive PVA-TSPBA hydrogel and antibacterial gallic acid/copper MOFs. The hybrid wound dressing demonstrates favorable biocompatibility. It does not impede the proliferation of fibroblasts or immune cells and can stimulate fibroblast migration, endothelial angiogenesis, and M2 macrophage polarization. Additionally, the dressing can scavenge reactive oxygen species (ROS) and provide antioxidant effects. Furthermore, DPP + MOF@Gel effectively inhibits the viability of S. aureus and E. coli in vitro and in vivo. The histological observations revealed enhanced granulation tissue formation, re-epithelialization, and angiogenesis in the DPP + MOF@Gel group compared to other groups. The local immune response also shifted from a pro-inflammatory to a pro-regenerative status with DPP + MOF@Gel treatment. The skin incision stitching experiment further exhibits DPP + MOF@Gel could reduce scar formation during wound healing. Taken together, the hybrid DPP + MOF@Gel holds great promise for treating bacteria-infected skin wounds and inhibiting scar formation during wound healing.Bacterial infection and scar formation remain primary challenges in wound healing. To address these issues, we developed a decellularized pomelo peel (DPP) functionalized with an adhesive PVA-TSPBA hydrogel and antibacterial gallic acid/copper MOFs. The hybrid wound dressing demonstrates favorable biocompatibility. It does not impede the proliferation of fibroblasts or immune cells and can stimulate fibroblast migration, endothelial angiogenesis, and M2 macrophage polarization. Additionally, the dressing can scavenge reactive oxygen species (ROS) and provide antioxidant effects. Furthermore, DPP + MOF@Gel effectively inhibits the viability of S. aureus and E. coli in vitro and in vivo. The histological observations revealed enhanced granulation tissue formation, re-epithelialization, and angiogenesis in the DPP + MOF@Gel group compared to other groups. The local immune response also shifted from a pro-inflammatory to a pro-regenerative status with DPP + MOF@Gel treatment. The skin incision stitching experiment further exhibits DPP + MOF@Gel could reduce scar formation during wound healing. Taken together, the hybrid DPP + MOF@Gel holds great promise for treating bacteria-infected skin wounds and inhibiting scar formation during wound healing.

The key to solve increasingly severe electromagnetic (EM) pollution is to explore sustainable, easily prepared, and cost-effective EM wave absorption materials with exceptional absorption capability. Herein, instead of anchoring on carbon materials in single layer, MoS 2 flower-like microspheres were stacked on the surface of pomelo peels-derived porous carbon nanosheets (C) to fabricate MoS 2 @C nanocomposites by a facile solvothermal process. EM wave absorption performances of MoS 2 @C nanocomposites in X-band were systematically investigated, indicating the minimum reflection loss (RL min ) of −62.3 dB (thickness of 2.88 mm) and effective absorption bandwidth (EAB) almost covering the whole X-band (thickness of 2.63 mm) with the filler loading of only 20 wt.%. Superior EM wave absorption performances of MoS 2 @C nanocomposites could be attributed to the excellent impedance matching characteristic and dielectric loss capacity (conduction loss and polarization loss). This study revealed that the as-prepared MoS 2 @C nanocomposites would be a novel prospective candidate for the sustainable EM absorbents with superior EM wave absorption performances.

Advanced carbon nanomaterials have been widely applied in various fields such as microelectronics, energy storage, catalysis, adsorption, biomedical engineering, and material strengthening. With the increasing demand for porous carbon nanomaterials, many studies have explored obtaining porous carbon nanomaterials from biomass, which is highly abundant. Pomelo peel, a type of biomass rich in cellulose and lignin, has been widely upgraded into porous carbon nanomaterials with large yield and significant applications. Here, we systematically review the recent progress in pyrolysis, activation, and applications of synthesizing porous carbon nanomaterials from waste pomelo peels. Moreover, we provide a perspective on the remaining challenges and potential future research directions.

Pectin was extracted from citrus pomelo waste, and the effects of calcium ions (Ca2+) on the gelation and hydrogels properties were investigated over a pH range of 3.2–8 by using viscoelastic analysis. The gelatinization of Ca2+-pectin was examined at concentrations of 0.9, 1.8, 2.4, and 3.6 M of Ca2+ in aqueous pectin solutions of 1%, 2%, 3%, and 4%. The gel transition of Ca2+-pectin solution to hydrogels was determined by measuring the storage modulus (G’) and loss modulus (G”) under mechanical strain from 0.01 to 100%. In a hydrogel of 3% pectin at Ca2+ = 2.4 M, as pH increased to 7, the G’ at 0.01 strain % was 3 × 104 Pa, and 3 × 103 Pa at pH 5, indicating that the crosslinking weakened at acidic pH. Due to the crosslinking between the calcium ions and the ionized carboxylic acid groups of pectin, the resulting hydrogel became stiff. When the mechanical strain % was in the range of 0.01–1%, G’ was unchanged and G” was an order of magnitude smaller than G’, indicating that the mechanical stress was relieved by the gel. In the range of 1–100%, the gel deformation progressed and both the moduli values were dropped. Collapse from the gel state to the solution state occurred at 1–10 strain %, but the softer hydrogels with G’ of 103 Pa had a larger strain % than the stiffer hydrogels with G’ of 104 Pa.

Pomelo fruitlets have the potential for extracting cellulose. This study aimed to investigate characterization and functionality of cellulose extracted from pomelo fruitlets by different extraction methods. Cellulose extracted by acidic-alkaline hydrogen peroxide hydrolysis (CAA), alkaline hydrogen peroxide hydrolysis (CA), and ultrasonic assisted alkaline hydrogen peroxide hydrolysis (CUA) were prepared from pomelo fruitlets. The results showed that cellulose CUA had higher yield and purity with higher crystallinity and smaller particle size than those of CAA or CA (p < 0.05). Specifically, the yield of CUA was 82.75% higher than that of CAA, and purity was increased by 26.42%. Additionally, water- and oil-holding capacities of CUA were superior to those of CAA or CA, increasing by 13–23% and 10–18%, respectively. The improvement of water- and oil-holding capacities were highly related to its smaller particle size with increased surface area. The results suggested that ultrasonic assisted alkaline hydrogen peroxide hydrolysis is a promising and efficient method to prepare high-purity cellulose from pomelo fruitlets, and this cellulose is expected to be a food stabilizer and pharmaceutical additive.

In order to obtain high yield pomelo peel pectin with better physicochemical properties, four pectin extraction methods, including hot acid extraction (HAE), microwave-assisted extraction (MAE), ultrasound-assisted extraction, and enzymatic assisted extraction (EAE) were compared. MAE led to the highest pectin yield (20.43%), and the lowest pectin recovery was found for EAE (11.94%). The physicochemical properties of pomelo peel pectin obtained by different methods were also significantly different. Pectin samples obtained by MAE had the highest methoxyl content (8.35%), galacturonic acid content (71.36%), and showed a higher apparent viscosity, thermal and emulsion stability. The pectin extracted by EAE showed the highest total phenolic content (12.86%) and lowest particle size (843.69 nm), showing higher DPPH and ABTS scavenging activities than other extract methods. The pectin extracted by HAE had the highest particle size (966.12 nm) and degree of esterification (55.67%). However, Fourier-transform infrared spectroscopy showed that no significant difference occurred among the different methods in the chemical structure of the extracted pectin. This study provides a theoretical basis for the industrial production of pomelo peel pectin.

This study designed a “turn-off–on” fluorescence analysis method based on carbon quantum dots (CQDs) to detect metal ions and amino acids in real sample systems. CQDs were derived from green pomelo peel via a one-step hydrothermal process. The co-doped CQDs with N and S atoms imparted excellent optical properties (quantum yield = 17.31%). The prepared CQDs could be used as fluorescent “turn-off” probes to detect Fe3+ with a limit of detection of 0.086 µM, a linear detection range of 0.1–160 µM, and recovery of 83.47–106.53% in water samples. The quenched CQD fluorescence could be turned on after adding L-cysteine (L-Cys), which allowed detection of L-Cys with a detection limit of 0.34 µM and linear range of 0.4–85 µM. Recovery of L-Cys in amino acid beverage was 87.08–122.74%. Visual paper-based testing strips and cellulose/CQDs composite hydrogels could be also used to detect Fe3+ and L-Cys.

A novel pomelo peel biochar/MgFe-layered double hydroxide composite (PPBC/MgFe-LDH) was synthesised using a facile coprecipitation approach and applied to remove cadmium ions (Cd (II)). The adsorption isotherm demonstrated that the Cd (II) adsorption by the PPBC/MgFe-LDH composite fit the Langmuir model well, and the adsorption behaviour was a monolayer chemisorption. The maximum adsorption capacity of Cd (II) was determined to be 448.961 (±12.3) mg·g−1 from the Langmuir model, which was close to the actual experimental adsorption capacity 448.302 (±1.41) mg·g−1. The results also demonstrated that the chemical adsorption controlled the rate of reaction in the Cd (II) adsorption process of PPBC/MgFe-LDH. Piecewise fitting of the intra-particle diffusion model revealed multi-linearity during the adsorption process. Through associative characterization analysis, the adsorption mechanism of Cd (II) of PPBC/MgFe-LDH involved (i) hydroxide formation or carbonate precipitation; (ii) an isomorphic substitution of Fe (III) by Cd (II); (iii) surface complexation of Cd (II) by functional groups (-OH); and (iv) electrostatic attraction. The PPBC/MgFe-LDH composite demonstrated great potential for removing Cd (II) from wastewater, with the advantages of facile synthesis and excellent adsorption capacity.

Pomelo (Citrus grandis .Linn Osbeck) oils is becoming more and more popular for everyone because it has great benefits. However, the efficiency of essential oil extraction process depends on the method and is influenced by a number of factors. Microwave-assisted hydro-distillation and Response Surface Methodology are selected for extracting and optimizing the factors affect the yield of the pomelo oil. The pomelo oil has the optimum yield was 4.5% when extracted with a water and peels ratio of 3,119: 1 (ml/g) for time extraction of 117.336 (minutes) at a microwave power of 403.115 (W) with high reliability (R2 = 0.9831)