Explore the vast range of titles available.

Pinellia ternata , a common medicinal plant in East Asia, holds significant economic and therapeutic values. However, the market industrialization of the P. ternata is retarded due to the lack of a further understanding of its cultivation patterns. Here, we report an efficient cultivation model for P. ternata . This study featured a design with four planting depths (5 cm, 10 cm, 15 cm, and 20 cm) and five types of propagation materials, forming 20 distinct experimental groups. Each group was replicated three times. This study thoroughly analyzed the specific impacts of two types and five different sizes of propagules, as well as four different planting depths, on the propagation coefficient, agronomic traits, yield, and quality of P. ternata . (1) Tubers outperformed bulbils in propagation coefficient, agronomic traits, yield, and quality, with larger propagules showing better performance than smaller ones. (2) Small-diameter propagules (≤ 1.6 cm) achieved the best propagation coefficient, yield, and quality at a planting depth of 5 cm. (3) Large-diameter propagules (1.6–2.0 cm) showed maximum yield and quality component accumulation at 10 cm. (4) Correlation analysis indicated propagation coefficient, yield, and quality were negatively correlated with planting depth but positively correlated with propagule size. In conclusion, this study provides important theoretical support for the cultivation model of P. ternata and is helpful to guide its industrial production.

This study evaluated the effects of nitrogen fertilization and different types of planting material on the yield and fruit quality of pineapple (Ananas comosus var. comosus) cv. Smooth Cayenne under the edaphoclimatic conditions of the Northern region of Rio de Janeiro State, Brazil. The experiment was conducted in a randomized block design, arranged in a factorial scheme with four nitrogen rates, six types of planting material, and two harvest seasons (winter and summer). Based on the results, it can be inferred that slips provided higher yields and heavier fruits, whereas plants derived from crowns and suckers showed lower productivity. Increasing nitrogen rates promoted greater fruit mass and length, higher pulp percentage, and increased production of vegetative propagules. Fruits harvested in the summer showed higher soluble solids content (15.5 °Brix), greater pulp and juice percentages, and lower titratable acidity, which are desirable characteristics for fresh consumption. Despite the seasonal differences, fruit mass ranging from 1.5 to 2.0 kg met commercial standards for both processing and domestic markets. The soluble solids/titratable acidity ratio (15.8) was below the ideal range for fresh consumption. The combination of appropriate planting material and nitrogen fertilization contributes to higher production efficiency, cost reduction, and improved fruit quality.

As it is well known, arbuscular mycorrhizal (AM) colonization can be initiated from the following three types of fungal propagules: spores, extraradical mycelium (ERM), and mycorrhizal root fragments harboring intraradical fungal structures. It has been shown that biomass allocation of AM fungi (AMF) among these three propagule types varies between fungal taxa, as also differs the ability of the different AMF propagule fractions to initiate new colonizations. In this study, the composition of the AMF community in the roots of rosemary (Rosmarinus officinalis L., a characteristic Mediterranean shrub), inoculated with the three different propagule types, was analyzed. Accordingly, cuttings from this species were inoculated with either AMF spores, ERM, or colonized roots extracted from a natural soil. The AMF diversity within the rosemary roots was characterized using terminal restriction fragment length polymorphism (T-RFLP) of the small subunit (SSU) rDNA region. The AMF community established in the rosemary plants was significantly different according to the type of propagule used as inoculum. AMF taxa differed in their ability to initiate new colonizations from each propagule type. Results suggest different colonization strategies for the different AMF families involved, Glomeraceae and Claroideoglomeraceae colonizing mainly from colonized roots whereas Pacisporaceae and Diversisporaceae from spores and ERM. This supports that AMF taxa show contrasting life-history strategies in terms of their ability to initiate new colonizations from the different propagule types. Further research to fully understand the colonization and dispersal abilities of AMF is essential for their rational use in ecosystem restoration programs.

Two trials on Mexican cypress Cupressus lusitanica Miller in the North Island of New Zealand were assessed for diameter at breast height and at one site, subjective scores for branch size and stem canker (caused by Seiridium spp.) at age 6 from planting. The trials comprised 15 open-pollinated families, represented by both cloned and seedling progeny. Linear mixed model methodology, using a spatial model for the residuals, was applied to estimate genetic parameters. Estimated narrow-sense heritabilities were moderate to high for diameter at breast height (range from 0.46 to 0.62), stem canker (≈0.30) and branch size (range from 0.23 to 0.45) and did not appear to differ significantly between propagule types for all traits. Clonally replicated progeny led to an increase in accuracy of selection for additive genetic merit when compared with seedling testing, with the improvement being greater for traits with lower narrow-sense heritabilities. Estimated additive genetic correlations between cloned and seedling progeny were moderate to high (≥0.65) for diameter and branch size, indicating that selection decisions would not be substantially changed using either propagule type for progeny testing. All estimates of non-additive genetic variation based on the cloned progeny were non-significant. The use of spatial analysis was effective for diameter and branch size, but not for stem canker. No significant genotype by environment interaction was detected for diameter. Implications of the results for breeding and deployment of C. lusitanica are discussed.

Reintroduction work must continue and should be expanded because it is an important tool to stabilize and restore vulnerable declining species. Reintroduction can play a vital role in keeping species present in our landscape through climate change, but this will be possible only through careful planning, research, modeling, and priority setting. In this chapter we review the insights emerging from the sections of this volume: the meta-analyses of plant reintroductions, the science and practice of reintroduction, and managed relocation (MR). We provide examples of well-conceived reintroduction projects to serve as models for planning future reintroductions. Furthermore, we make suggestions for improving plant rein-troduction science and practice, preparing for climate change, and moving forward to best conserve biodiversity.

• Dispersal is a key process driving local-scale community assembly and global-scale biogeography of plant symbiotic arbuscular mycorrhizal (AM) fungal communities. A trait-based approach could improve predictions regarding how AM fungal aerial dispersal varies by species. • We conducted month-long collections of aerial AM fungi for 12 consecutive months in an urban mesic environment at heights of 20 m. We measured morphological functional traits of collected spores and assessed aerial AM fungal community structure both morphologically and with high-throughput sequencing. • Large numbers of AM fungal spores were present in the air over the course of 1 yr, and these spores exhibited traits that facilitate aerial dispersal. Measured aerial spores were smaller than average for Glomeromycotinan fungi. Trait-based predictions indicate that nearly one third of described species from diverse genera demonstrate the potential for aerial dispersal. Diversity of aerial AM fungi was relatively high (20 spore species and 17 virtual taxa), and both spore abundance and community structure shifted temporally. • The prevalence of aerial dispersal in AM fungi is perhaps greater than previously indicated, and a hypothesized model of AM fungal aerial dispersal mechanisms is presented. Anthropogenic soil impacts may liberate AM fungal propagules initiating the dispersal of ruderal species.

1 Propagule pressure plays a key role in the successful establishment of introduced species. Explaining invasion patterns, predicting future invasions and reducing invasion rates are priority areas of research and management, especially in marine systems, which need more detailed correlates and invasion predictors. 2 The commercial maritime shipping fleet is the most prolific long distance anthropogenic transfer mechanism (vector) of marine non-indigenous species on a global scale, causing invasions of coasts by a wide diversity of organisms. Although most vessel arrivals provide an opportunity for organism introductions, there are often substantial differences among ship types—in both their \"morphological traits\" (structural design) and \"behavioural ecology\" (cargo delivery model and operational tempo)-that influence propagule delivery by ballast water and biofouling, the two dominant sources or sub-vectors for ship-mediated species transfers. 3 We reviewed ship specialization and its implications for marine invasion and vector management. First, we identified factors that affect ship-mediated propagule delivery characteristics (number, identity, diversity and quality/condition), classifying these as ship type independent or dependent factors. Second, we compared the relevance of these factors for both ballast water and biofouling. Third, we estimated and compared the magnitude of several key factors affecting propagule delivery among seven major ship types. 4 Typical voyage speed varies by 74% and port residence time varies sixfold among ship types. Similarly, typical ballast water discharge varies by an order of magnitude among ship types. These and other ship type dependent factors affect propagule delivery characteristics, resulting in uneven magnitude of species transfer among ship types. 5 Policy implications. Variation among commercial ship types is rarely integrated into analyses of marine bioinvasions and proxy measures of propagule delivery. Their inclusion may lead to more robust explanation, prediction and management of marine invasions. Risk analyses that account for differences among ship types and prevailing traffic directionality will likely offer greater insight than null models, which treat ships equally. Furthermore, ballast treatment technologies and hull husbandry may advance to reduce species transfers more effectively when tailored for different ship types, recognizing the variation and operational constraints (that affect propagule delivery) among the diverse range of ship types.

Mentha is a strongly scented herb of the Lamiaceae (formerly Labiatae ) and includes about 30 species and hybrid species that are distributed or introduced throughout the globe. These fragrant plants have been selected throughout millennia for use by humans as herbs, spices, and pharmaceutical needs. The distilling of essential oils from mint began in Japan and England but has become a significant industrial product for the US, China, India, and other countries. The US Department of Agriculture (USDA), Agricultural Research Service, National Clonal Germplasm Repository (NCGR) maintains a mint genebank in Corvallis, Oregon. This facility preserves and distributes about 450 clones representing 34 taxa, hybrid species, advanced breeder selections, and F1 hybrids. Mint crop wild relatives are included in this unique resource. The majority of mint accessions and hybrids in this collection were initially donated in the 1970s by the A.M. Todd Company, located in Kalamazoo, Michigan. Other representatives of diverse mint taxa and crop wild relatives have since been obtained from collaborators in Australia, New Zealand, Europe, and Vietnam. These mints have been evaluated for cytology, oil components, verticillium wilt resistance, and key morphological characters. Pressed voucher specimens have been prepared for morphological identity verification. An initial set of microsatellite markers has been developed to determine clonal identity and assess genetic diversity. Plant breeders at private and public institutions are using molecular analysis to determine identity and diversity of the USDA mint collection. Evaluation and characterization includes essential oil content, disease resistance, male sterility, and other traits for potential breeding use. These accessions can be a source for parental genes for enhancement efforts to produce hybrids, or for breeding new cultivars for agricultural production. Propagules of Mentha are available for distribution to international researchers as stem cuttings, rhizome cuttings, or seed, which can be requested through the GRIN-Global database of the US National Plant Germplasm System, subject to international treaty and quarantine regulations.

Arbuscular mycorrhizal fungi (AMF) exhibit diverse strategies for colonization and survival, yet the extent to which different propagule types—roots, extraradical hyphae, and spores—contribute to these processes remains unclear. In a pot experiment using Allium tuberosum and soils from three field sites, we characterized AMF communities in root, hyphal, and spore fractions through 18S rRNA gene sequencing. A total of 427 OTUs were identified, with Glomus and Paraglomus dominating. Root fractions contained significantly more OTUs than hyphal fractions, suggesting strong specialization for intraradical colonization. Only a small subset of taxa occurred across all propagule types. Indicator species analysis revealed 21 OTUs with significant associations, mainly in root and hyphal fractions, while spore-specific taxa were rare. PERMANOVA revealed that both propagule type and soil type shaped the community structure, with propagule identity being the stronger factor. These results highlight propagule-type specialization as a key ecological trait in AMF and underscore the importance of examining multiple fungal compartments to fully capture AMF diversity and function.

Soil archives are an important resource in agronomic and ecosystem sciences. If microbial communities could be reconstructed from archived soil DNA, as prehistoric plant communities are reconstructed via pollen data, soil archive resources would assume even greater value for reconstructing land-use history, forensic science, and biosphere modelling. Yet, the effects of long-term soil archival on the preservation of microbial DNA is still largely unknown. To address this, we assessed the capacity of high-throughput sequencing (Illumina MiSeq) of ITS (internal transcribed spacer) and prokaryotic 16S rRNA genes for reconstructing soil microbial communities across a 20 years time-series. We studied air-dried soil archives and fresh soil samples taken from Populus bioenergy and deciduous forest research plots at the Kellogg Biological Station. Habitat and archival time explained significant amounts of variation in soil microbial [alpha]- and [beta]-diversity both in fungal and prokaryotic communities. We found that microbial richness, diversity, and abundance generally decreased with storage time, but varied between habitat and taxonomic groups. The high relative abundance of ectomycorrhizal species including Hebeloma and Cortinarius detected in older soil archives raises questions regarding traits such as long-term persistence and viability of ectomycorrhizal propagules in soils, with relevance to forest health and ecosystem succession. Talaromyces, Paecilomyces and Epicoccum spp. were detected in fresh and across 20-year-old archived soils and were also cultured from these soils demonstrating their long-term spore viability. In summary, we found that microbial DNA in air-dried soils archived over the past 20 years degraded with time, in a manner that differed between soil types and phylogenetic groups of microbes.