Explore the vast range of titles available.

Summary Genome‐wide association studies (GWASs) combining high‐throughput genome resequencing and phenotyping can accelerate the dissection of genetic architecture and identification of genes for plant complex traits. In this study, we developed a rapeseed genomic variation map consisting of 4 542 011 SNPs and 628 666 INDELs. GWAS was performed for three seed‐quality traits, including erucic acid content (EAC), glucosinolate content (GSC) and seed oil content (SOC) using 3.82 million polymorphisms in an association panel. Six, 49 and 17 loci were detected to be associated with EAC, GSC and SOC in multiple environments, respectively. The mean total contribution of these loci in each environment was 94.1% for EAC and 87.9% for GSC, notably higher than that for SOC (40.1%). A high correlation was observed between phenotypic variance and number of favourable alleles for associated loci, which will contribute to breeding improvement by pyramiding these loci. Furthermore, candidate genes were detected underlying associated loci, based on functional polymorphisms in gene regions where sequence variation was found to correlate with phenotypic variation. Our approach was validated by detection of well‐characterized FAE1 genes at each of two major loci for EAC on chromosomes A8 and C3, along with MYB28 genes at each of three major loci for GSC on chromosomes A9, C2 and C9. Four novel candidate genes were detected by correlation between GSC and SOC and observed sequence variation, respectively. This study provides insights into the genetic architecture of three seed‐quality traits, which would be useful for genetic improvement of B. napus.

In the past decades, metabolomics has been used to comprehensively understand a variety of food materials for improvement and assessment of food quality. Farm animal skeletal muscles and meat are one of the major targets of metabolomics for the characterization of meat and the exploration of biomarkers in the production system. For identification of potential biomarkers to control meat quality, studies of animal muscles and meat with metabolomics (MEATabolomics) has been conducted in combination with analyses of meat quality traits, focusing on specific factors associated with animal genetic background and sensory scores, or conditions in feeding system and treatments of meat in the processes such as postmortem storage, processing, and hygiene control. Currently, most of MEATabolomics approaches combine separation techniques (gas or liquid chromatography, and capillary electrophoresis)–mass spectrometry (MS) or nuclear magnetic resonance (NMR) approaches with the downstream multivariate analyses, depending on the polarity and/or hydrophobicity of the targeted metabolites. Studies employing these approaches provide useful information to monitor meat quality traits efficiently and to understand the genetic background and production system of animals behind the meat quality. MEATabolomics is expected to improve the knowledge and methodologies in animal breeding and feeding, meat storage and processing, and prediction of meat quality.

This study aimed to develop a tool to validate multivariety breed egg quality classification depending on quality-related internal and external traits using a discriminant canonical analysis approach. A flock of 60 Utrerana hens (Franciscan, White, Black, and Partridge) and a control group of 10 Leghorn hens were placed in individual cages to follow the traceability of the eggs and perform an individual internal and external quality assessment. Egg groups were determined depending on their commercial size (S, M, L, and XL), laying hen breed, and variety. Egg weight, major diameter, minor diameter, shell b*, albumen height, and the presence or absence of visual defects in yolk and/or albumen showed multicollinearity problems (variance inflation factor (VIF) > 5) and were discarded. Albumen weight, eggshell weight, and yolk weight were the most responsible traits for the differences among egg quality categories (Wilks’ lambda: 0.335, 0.539, and 0.566 for albumen weight, eggshell weight, and yolk weight, respectively). The combination of traits in the first two dimensions explained 55.02% and 20.62% variability among groups, respectively. Shared properties between Partridge and Franciscan varieties may stem from their eggs presenting heavier yolks and slightly lower weights, while White Utrerana and Leghorn hens’ similarities may be ascribed to hybridization reminiscences.

Earlier studies suggested that traditional apple varieties have quality traits well accepted by consumers and beneficial effects on human health. The aim was to collect 25 traditional apple varieties grown in Croatia and to determine, for the first time in so many details, their external (weight, height, width, shape, color), internal quality traits (firmness, starch decomposition index, maturity index, soluble solid concentration, total acids, soluble solid/total acids ratio, pH), and seed characteristics. In addition, individual polyphenols were determined in the flesh and peel, by using RP-HPLC. All was compared to the commercial variety ‘Idared’. Quality parameters of these varieties were similar to those of the commercial variety. The flesh and peel contained flavan-3-ols, dihydrochalcones, phenolic acids, and flavonols, while anthocyanins were additionally found in the peel. Total polyphenols in the peel (536–3801 mg kg−1 fresh weight (FW)) and in the flesh (79–1294 mg kg−1 FW) of the majority of varieties were higher than in the commercial variety. Principal component analysis showed possible clustering according to polyphenol amounts. According to the observed diversity of quality traits and bioactive polyphenol contents, the traditional varieties have potential for consumer acceptance and increased cultivation.

The aim of the present study is to characterize the productive capability of Utrerana and to compare the relationships among parameters determining the internal and external quality of the egg, through canonical correlation analysis. A flock of 68 Utrerana hens and a control group of Leghorn hens (n = 17) were housed individually to allow individual identification of eggs and for the assessment of egg quality characteristics. Almost all variables showed differences when both breeds were compared, except for white height, yolk diameter, yolkL* and yolk pH (p > 0.05). Only minor diameter, white height, yolkL*, yolka*, and shell weight reported significant differences between laying age groups. White height, yolk color, and almost all yolk color coordinates were significantly different (p < 0.05) for period and month. Egg and white weight reached highest significantly different levels for the fourth and fifth time that the hens laid an egg. External quality-related traits are better predictors of internal quality-related traits than vice versa, enabling the implementation of an effective noninvasive method for internal quality determination and egg classification aimed at suiting the needs of consumers.

Summary Heading date 1 (Hd1) is an important gene for the regulation of flowering in rice, but its variation in major cultivated rice varieties, and the effect of this variation on yield and quality, remains unknown. In this study, we selected 123 major rice varieties cultivated in China from 1936 to 2009 to analyse the relationship between the Hd1 alleles and yield‐related traits. Among these varieties, 19 haplotypes were detected in Hd1, including two major haplotypes (H8 and H13) in the japonica group and three major haplotypes (H14, H15 and H16) in the indica group. Analysis of allele frequencies showed that the secondary branch number was the major aimed for Chinese indica breeding. In the five major haplotypes, SNP316(C‐T) was the only difference between the two major japonica haplotypes, and SNP495(C‐G) and SNP614(G‐A) are the major SNPs in the three indica haplotypes. Association analysis showed that H16 is the most preponderant allele in modern cultivated Chinese indica varieties. Backcrossing this allele into the japonica variety Chunjiang06 improved yield without decreasing grain quality. Therefore, our analysis offers a new strategy for utilizing these preponderant alleles to improve yield and quality of japonica varieties for cultivation in the southern areas of China.

Aroma is one of the main attributes that consumers consider when appreciating and selecting a coffee; hence it is considered an important quality trait. However, the most common methods to assess aroma are based on expensive equipment or human senses through sensory evaluation, which is time-consuming and requires highly trained assessors to avoid subjectivity. Therefore, this study aimed to estimate the coffee intensity and aromas using a low-cost and portable electronic nose (e-nose) and machine learning modeling. For this purpose, triplicates of nine commercial coffee samples with different intensity levels were used for this study. Two machine learning models were developed based on artificial neural networks using the data from the e-nose as inputs to (i) classify the samples into low, medium, and high-intensity (Model 1) and (ii) to predict the relative abundance of 45 different aromas (Model 2). Results showed that it is possible to estimate the intensity of coffees with high accuracy (98%; Model 1), as well as to predict the specific aromas obtaining a high correlation coefficient (R = 0.99), and no under- or over-fitting of the models were detected. The proposed contactless, nondestructive, rapid, reliable, and low-cost method showed to be effective in evaluating volatile compounds in coffee, which is a potential technique to be applied within all stages of the production process to detect any undesirable characteristics on–time and ensure high-quality products.

Metabolic changes occurring in ripe or senescent fruits during postharvest storage lead to a general deterioration in quality attributes, including decreased flavor and ‘off-aroma’ compound generation. As a consequence, measures to reduce economic losses have to be taken by the fruit industry and have mostly consisted of storage at cold temperatures and the use of controlled atmospheres or ripening inhibitors. However, the biochemical pathways and molecular mechanisms underlying fruit senescence in commercial storage conditions are still poorly understood. In this sense, metabolomic platforms, enabling the profiling of key metabolites responsible for organoleptic and health-promoting traits, such as volatiles, sugars, acids, polyphenols and carotenoids, can be a powerful tool for further understanding the biochemical basis of postharvest physiology and have the potential to play a critical role in the identification of the pathways affected by fruit senescence. Here, we provide an overview of the metabolic changes during postharvest storage, with special attention to key metabolites related to fruit quality. The potential use of metabolomic approaches to yield metabolic markers useful for chemical phenotyping or even storage and marketing decisions is highlighted.

Fruit flavor and nutritional characteristics are key quality traits and ones of the main factors influencing consumer preference. Central carbon metabolism, also known as primary metabolism, contributes to the synthesis of intermediate compounds that act as precursors for plant secondary metabolism. Specific and specialized metabolic pathways that evolved from primary metabolism play a key role in the plant's interaction with its environment. In particular, secondary metabolites present in the fruit serve to increase its attractiveness to seed dispersers and to protect it against biotic and abiotic stresses. As a consequence, several important organoleptic characteristics, such as aroma, color, and fruit nutritional value, rely upon secondary metabolite content. Phenolic and terpenoid compounds are large and diverse classes of secondary metabolites that contribute to fruit quality and have their origin in primary metabolic pathways, while the delicate aroma of ripe fruits is formed by a unique combination of hundreds of volatiles that are derived from primary metabolites. In this review, we show that the manipulation of primary metabolism is a powerful tool to engineer quality traits in fruits, such as the phenolic, terpenoid, and volatile content. The enzymatic reactions responsible for the accumulation of primary precursors are bottlenecks in the transfer of metabolic flux from central to specialized metabolism and should be taken into account to increase the yield of the final products of the biosynthetic pathways. In addition, understanding the connection and regulation of the carbon flow between primary and secondary metabolism is a key factor for the development of fruit cultivars with enhanced organoleptic and nutritional traits.

Soybean (Glycine max L.) is the main source of vegetable protein and edible oil for humans, with an average content of about 40% crude protein and 20% crude fat. Soybean yield and quality traits are mostly quantitative traits controlled by multiple genes. The quantitative trait loci (QTL) mapping for yield and quality traits, as well as for the identification of mining-related candidate genes, is of great significance for the molecular breeding and understanding the genetic mechanism. In this study, 186 individual plants of the F2 generation derived from crosses between Changjiangchun 2 and Yushuxian 2 were selected as the mapping population to construct a molecular genetic linkage map. A genetic map containing 445 SSR markers with an average distance of 5.3 cM and a total length of 2375.6 cM was obtained. Based on constructed genetic map, 11 traits including hundred-seed weight (HSW), seed length (SL), seed width (SW), seed length-to-width ratio (SLW), oil content (OIL), protein content (PRO), oleic acid (OA), linoleic acid (LA), linolenic acid (LNA), palmitic acid (PA), stearic acid (SA) of yield and quality were detected by the multiple- d size traits and 113 QTLs related to quality were detected by the multiple QTL model (MQM) mapping method across generations F2, F2:3, F2:4, and F2:5. A total of 71 QTLs related to seed size traits and 113 QTLs related to quality traits were obtained in four generations. With those QTLs, 19 clusters for seed size traits and 20 QTL clusters for quality traits were summarized. Two promising clusters, one related to seed size traits and the other to quality traits, have been identified. The cluster associated with seed size traits spans from position 27876712 to 29009783 on Chromosome 16, while the cluster linked to quality traits spans from position 12575403 to 13875138 on Chromosome 6. Within these intervals, a reference genome of William82 was used for gene searching. A total of 36 candidate genes that may be involved in the regulation of soybean seed size and quality were screened by gene functional annotation and GO enrichment analysis. The results will lay the theoretical and technical foundation for molecularly assisted breeding in soybean.