Explore the vast range of titles available.

The influence of the addition of four legume flours, chickpea, broad bean, common bean and red lentil (in amounts of 5%, 10% and 15% to a wheat-rye composite flour (50:50:0-control flour), in ratios of 50:45:5; 50:40:10; 50:35:15) was studied by analyzing the rheological properties of dough in order to further exploit the functionality of legume flours in bakery products. The rheological properties of dough were monitored using a Mixolab 2. A Rheofermentometer F4 was used to check the dough fermentation, and a Volscan was used for evaluating the baking trials. The addition of different legume flours in the mixtures resulted in different viscoelastic properties of the dough. The results showed a weakening of the protein network depending on the amount of legume flour added and on the specific legume flour. On the contrary, all samples with a higher proportion of legume flour showed an increased resistance to starch retrogradation. All flours had the ability to produce a sufficient volume of fermenting gases, with the exception of flours with a higher addition of broad bean flour, and the baking test confirmed a lower bread volume for bread with this addition. The results of the sensory evaluation indicated that legume flour additions resulted in breads with an acceptable sensory quality, in the case of additions of 5% at the same level as the bread controls, or even better. The aromas and flavors of the added non-cereal ingredients improved the sensory profile of wheat-rye bread. Breads with additions of chickpea, common bean and broad bean had a considerable proportion of darker colors in comparison to the control bread and bread with red lentil.

In recent years, natural food colouring components have been sought. The conducted study presents the possibility of using different legume flours as a colouring component in durum wheat semolina pasta. The impact of legume flours addition on chemical composition, cooking quality, and sensory properties of pasta was also investigated. The pasta was fortified with 0–20% of green pea, red lentil, and grass pea flours and was made using lamination technology. An increase in the amount of the legume flour caused a significant increase in the content of dietary fibre, ash, protein, and essential amino acids, including lysine. The addition of the legume flours changed the colour of the pasta samples. Most suitable colouring component of all the studied legume flours was the red lentil flour. The pasta with 20% addition of red lentil flour had the most intense colouring (ΔE = 11.31), highest level of consumer acceptance and were characterized by acceptable cooking losses (7.47% d.m.), appropriate weight increase index (2.44), and high firmness.

The development of convenience foods by incorporating nutrient-rich pulses such as peas and lentils will tremendously alter the future of pulse and cereal industries. However, these pulses should be size-reduced before being incorporated into many food products. Therefore, an attempt was made to adapt roller mill settings to produce de-husked yellow pea and red lentil flours. The milling flowsheets unique to yellow peas and red lentils were developed in producing small, medium, and large flours with maximum yield and flour quality. This study also investigated the differences in chemical composition, physical characteristics, and particle size distributions of the resultant six flour fractions. The kernel dimensions and physicochemical properties of the whole yellow pea and red lentils were also studied to develop customized mill settings. Overall, the mill settings had a significant effect on the physical properties of different particle-sized flours. The geometric mean diameters of different particle-sized red lentil flours were 56.05 μm (small), 67.01 μm (medium), and 97.17 μm (large), while for yellow pea flours they were 41.38 μm (small), 60.81 μm (medium), and 98.31 μm (large). The particle size distribution of all the flour types showed a bimodal distribution, except for the small-sized yellow pea flour. For both the pulse types, slightly more than 50% flour was approximately sizing 50 μm, 75 μm, and 100 μm for small, medium, and large settings, respectively. The chemical composition of the flour types remained practically the same for different-sized flours, fulfilling the objective of this current study. The damaged starch values for red lentil and yellow pea flour types increased with a decrease in flour particle size. Based on the Hausner’s ratios, the flowability of large-sized flour of red lentils could be described as passable; however, all the remaining five flour types were indicated as either poor or very poor. The findings of this study assist the millers to adapt yellow pea and red lentil milling technologies with minor modifications to the existing facilities. The study also helps in boosting the production of various baking products using pulse and wheat flour blends to enhance their nutritional quality.

Dietary pulses, including lentils, are protein-rich plant foods that are enriched in intestinal health-promoting bioactives, such as non-digestible carbohydrates and phenolic compounds. The aim of this study was to investigate the effect of diets supplemented with cooked red lentils on the colonic microenvironment (microbiota composition and activity and epithelial barrier integrity and function). C57Bl/6 male mice were fed one of five diets: a control basal diet (BD), a BD-supplemented diet with 5, 10 or 20% cooked red lentils (by weight), or a BD-supplemented diet with 0.7% pectin (equivalent soluble fiber level as found in the 20% lentil diet). Red lentil supplementation resulted in increased: (1) fecal microbiota α-diversity; (2) abundance of short-chain fatty acid (SCFA)-producing bacteria (e.g., Prevotella, Roseburia and Dorea spp.); (3) concentrations of fecal SCFAs; (4) mRNA expression of SCFA receptors (G-protein-coupled receptors (GPR 41 and 43) and tight/adherens junction proteins (Zona Occulden-1 (ZO-1), Claudin-2, E-cadherin). Overall, 20% lentil had the greatest impact on colon health outcomes, which were in part explained by a change in the soluble and insoluble fiber profile of the diet. These results support recent public health recommendations to increase consumption of plant-based protein foods for improved health, in particular intestinal health.

Phenolic compounds were extracted from red lentil seeds using 80% (v/v) aqueous acetone. The crude extract was applied to a Sephadex LH-20 column. Fraction 1, consisting of sugars and low-molecular-weight phenolics, was eluted from the column by ethanol. Fraction 2, consisting of tannins, was obtained using acetone-water (1:1; v/v) as the mobile phase. Phenolic compounds present in the crude extract and its fractions demonstrated antioxidant and antiradical activities as revealed from studies using a β-carotene-linoleate model system, the total antioxidant activity (TAA) method, the DPPH radical-scavenging activity assay, and a reducing power evaluation. Results of these assays showed the highest values when tannins (fraction 2) were tested. For instance, the TAA of the tannin fraction was 5.85 μmol Trolox® eq./mg, whereas the crude extract and fraction 1 showed 0.68 and 0.33 μmol Trolox® eq./mg, respectively. The content of total phenolics in fraction 2 was the highest (290 mg/g); the tannin content, determined using the vanillin method and expressed as absorbance units at 500 nm per 1 g, was 129. There were 24 compounds identified in the crude extract using an HPLC-ESI-MS method: quercetin diglycoside, catechin, digallate procyanidin, and p-hydroxybenzoic were the dominant phenolics in the extract.

In the context of dietary transition, blending animal-source protein with plant-source protein offers a promising way to exploit their nutritional complementarity. This study investigates the feasibility of formulating an iron-rich hybrid food product blending plant-source and animal-source protein ingredients for iron-deficient populations. Using a commercial 3D-food printer, two different-shaped products composed mainly of pork and chicken liver and red lentils were designed. After baking at 180 °C with 70% steam, the 3D-printed products were packed under two different modified atmospheres (MAP): O2-MAP (70% oxygen + 30% carbon dioxide) and N2-MAP (70% nitrogen + 30% carbon dioxide) and stored at 4 °C. pH, water content, aw, lipid oxidation, heme iron and non-heme iron contents and textural properties were measured after 0, 7, 14 and 21 days in storage. After 21 days in storage, the 3D-printed hybrid products had an iron content of around 13 mg/100 g, regardless of the product form and packaging method. However, O2-MAP products showed significant (p < 0.05) time–course changes from day 0 to day 7, i.e., an increase in lipid oxidation, a decrease in heme iron content and an increase in product hardness, gumminess and chewiness. This work opens prospects for developing hybrid food products that upvalue animal by-products.

Pulses have desirable nutritional properties and a wide range of applications in the food industry as meat-free, casein-free, gluten-free, and functional food products. Unfortunately, the legume raw material contains some anti-nutrients and allergenic agents; nonetheless, fermentation processes may reduce some of these undesirable compounds. Therefore, the objective of the preliminary investigation was to determine the profile of bacteria occurring after spontaneous fermentation of Lens culinaris Medik. and detect changes in the protein–peptide pattern, including potential modifications of Len c3, i.e., a non-specific lipid-transfer protein (nsLTP) recognized as an important allergen. This study involved MALDI TOF/TOF, Illumina next-generation sequencing, and FT-IR spectroscopy analyses. Sixteen different species were identified in the plant-based material after 48-h spontaneous fermentation. The most abundant species were Lactococcus taiwanensis and Pediococcus pentosaceus (54.95% and 25.34%, respectively). The performed initial analysis revealed that after spontaneous fermentation had occurred the degradation of proteins (~10 kDa) and peptides (6–8 kDa), as well as the decomposition of proteins in the mass range that might be attributed to allergenic nsLTP. The preliminary findings encourage further research into the functional and technological properties of the isolated bacteria and in-depth analyses of the possibility of the removal of allergenic compounds from red lentils through fermentation carried out by the isolates.

In this research, the breakage susceptibility of two classes of lentil (green and red) was evaluated as affected by impact energy and seed moisture content. The experiments were conducted at impact energies of 0.1, 0.2 and 0.3 J, and moisture contents of 10, 12.5, 15, 17.5, 20 and 25% (wet basis). Results showed that red lentil seeds had more breakage than green seeds and the difference in breakage percentage between green and red lentil seeds was significant at 0.01% level according to analysis of variance (p < .01). Percentage breakage of both green and red lentil seeds increased as the energy of impact increased. With increasing the seed moisture content of the both green and red lentils, the breakage percentage of seeds decreased. The average values of seeds breakage green and red lentil seeds varied from 100 to 67.7% and from 100 to 93.1%, respectively, as the seeds moisture content increased from 10 to 25%. The optimum seed moisture at which minimum damage was observed was 17.5% for green lentil and 15% for red lentil. Mathematical relationships composed of lentil seeds moisture content and energy of impact were developed for accurate description of the breakage percentage of green and red lentil seeds under impact loading. The objective of this research was to determine the effects of moisture content and impact energy on the breakage susceptibility of two classes of lentil (green and red). The experiments were conducted at moisture contents of 10, 12.5, 15, 17.5, 20 and 25% on a‐ wet basis (w.b.), and at impact energies of 0.1, 0.2 and 0.3 J. Breakage percentage of both green and red lentil seeds increased as the impact energy increased. Red lentil seeds had more breakage than green seeds and the difference in breakage percentage between green and red lentil seeds was significant at 0.01% level according to analysis of variance (p < .01).

Gluten-free (GF) diets often become nutritionally imbalanced, being low in proteins and fibers and high in sugars. Preparing GF foods with improved nutritional value is therefore a key challenge. This study investigates the impact of different combinations of whey protein (11.9%), inulin (6.0%) as dietary fiber, and xylitol (27.9%) as a sweetener used in the enrichment of green- and red-lentil-based gluten-free cookies. The cookies were characterized in terms of baking loss, geometric parameters, color, texture, and sensory profile. The results showed that these functional ingredients had different impacts on the lentil cookies made of different (green/red) lentils, especially regarding the effect of fiber and xylitol on the volume (green lentil cookies enriched with fiber: 16.5 cm3, sweetened with xylitol: 10.9 cm3 vs. 21.2 cm3 for control; red lentil cookies enriched with fiber: 21.9 cm3, sweetened with xylitol: 21.1 cm3 vs. 21.8 cm3 for control) and color (e.g., b* for green lentil cookies enriched with fiber: 13.13, sweetened with xylitol: 8.15 vs. 16.24 for control; b* for red lentil cookies enriched with fiber: 26.09, sweetened with xylitol: 32.29 vs. 28.17 for control). Regarding the textural attributes, the same tendencies were observed for both lentil products, i.e., softer cookies were obtained upon xylitol and whey protein addition, while hardness increased upon inulin enrichment. Stickiness was differently influenced by the functional ingredients in the case of green and red lentil cookies, but all the xylitol-containing cookies were less crumbly than the controls. The interactions of the functional ingredients were revealed in terms of all the properties investigated. Sensory analysis showed that the addition of whey protein resulted in less intensive “lentil” and “baked” aromas (mostly for red lentil cookies), and replacement of sugar by xylitol resulted in crumblier and less hard and crunchier products. The application of different functional ingredients in the enrichment of lentil-based gluten-free cookies revealed several interactions. These findings could serve as a starting point for future research and development of functional GF products.

Commercially produced gluten-free bread has gained popularity over the past decade. However, it often struggles to match its gluten-containing counterparts in terms of nutritional aspects, appearance, texture, and consumer acceptability. In this study, we aimed to optimize a novel gluten-free formulation based on tapioca starch and red lentil flour using a D-optimal mixture design. According to our findings, the swelling power and oil-holding capacity of the blended flour increased with the proportion of red lentil flour. The volume of bread loaves with 15% red lentil flour and 15% or 30% tapioca starch was close to that of the control bread. The addition of lentil flour tended to reduce the springiness of the experimental bread crumb, while the hardness was lower for the experimental sample with 15% lentil and 30% tapioca starch. The predicted glycemic index of the bread samples ranged from 70 to 87, and the sample containing 30% tapioca and 30% red lentil flour achieved the lowest score. Finally, the optimized gluten-free bread formulation showed lower hardness, pore density, and predicted glycemic index, and higher volume compared to the control bread sample, demonstrating that it is possible to improve gluten-free baked goods without compromises.