Explore the vast range of titles available.

Background: The application of robotic staplers in surgeries has increased in recent years. Robotic platform enhances ability of the surgeon to directly control and manoeuvre staplers to achieve required angulation and sealing within the confines of the thorax and pelvis. Hence, in this study, we intended to learn the effectiveness of the SureForm™ SmartFire™ technology stapling system in various oncological procedures. Patients and Methods: Prospective study of 76 patients who underwent robotic-assisted total oesophagectomy, gastrectomies, hemicolectomies, low anterior resection/abdominoperineal resection and lobectomies/metastasectomy for respective malignancies for 16 months. Internal data log of the da Vinci surgical system for reload colour, reloads used, clamp attempts and staple fires used during each procedure along with patient's post-operative outcomes were recorded. Results: One hundred and sixty-four firings have been made in 76 cases, with the majority being green reloads (76.8%) and average reloads for radical cystectomy 3.5, lobectomies/metastasectomy 3.44 and oesophagectomy 2.55. None of the cases had incomplete firings and required force-fire activation. In forty per cent of cases, the robotic stapler had to pause for sequential compression and seal. Seventy per cent of anterior resection procedures had at least one firing >45° beyond the laparoscopy limit. Collectively 52% SureForm stapler fires in anterior resection with >45° angle of fire. None of the cases had bleed or leak. Conclusion: SureForm™ SmartFire™ robotic staplers can be used for various oncological surgeries with minimal peri-operative leak and bleeding and has better articulation in closed spaces. Further case-matched comparative studies with laparoscopic or handheld powered staplers would be required for useful operative decision-making and analyse the clinical outcomes.

Minimally invasive surgery has attracted great attention due to small trauma, light pain, and quick recovery. Currently, most minimally invasive surgical robots lack the ability to force sense, resulting in high risks. Herein, a novel minimally invasive surgical force sensing and feedback system for minimally invasive surgical robot is proposed based on a flexible triaxial force capacitive sensor array. The capacitive force sensors utilize a microstructure electrode and orthogonal triangular pyramid microstructure to tackle the trade‐off between high sensitivity and wide‐detection range, showing 0–3 N detection range for normal force and high sensitivity of 69.19% N −1 . Furthermore, the triaxial capacitive force sensors are integrated into the end‐effector of the minimally invasive surgical robot to form the minimally invasive surgical force sensing system. The system can show real‐time position of gripping or touching action, and the magnitude of triaxial force on the display surface. Importantly, the sensing force can further control the movement of the clamp, thus forming a novel force sensing and feedback system. The force sensing and feedback system of this minimally invasive surgical robot lays the foundation for its application in minimally invasive surgery andis expected to improve the safety and success of robotic‐assisted minimally invasive surgery.

Phenotyping plants is an essential component of any effort to develop new crop varieties. As plant breeders seek to increase crop productivity and produce more food for the future, the amount of phenotype information they require will also increase. Traditional plant phenotyping relying on manual measurement is laborious, time-consuming, error-prone, and costly. Plant phenotyping robots have emerged as a high-throughput technology to measure morphological, chemical and physiological properties of large number of plants. Several robotic systems have been developed to fulfill different phenotyping missions. In particular, robotic phenotyping has the potential to enable efficient monitoring of changes in plant traits over time in both controlled environments and in the field. The operation of these robots can be challenging as a result of the dynamic nature of plants and the agricultural environments. Here we discuss developments in phenotyping robots, and the challenges which have been overcome and others which remain outstanding. In addition, some perspective applications of the phenotyping robots are also presented. We optimistically anticipate that autonomous and robotic systems will make great leaps forward in the next 10 years to advance the plant phenotyping research into a new era.

The increase in life expectancy and recent advancements in technology and medical science have changed the way we deliver health services to the aging societies. Evidence suggests that home telemonitoring can significantly decrease the number of readmissions, and continuous monitoring of older adults' daily activities and health-related issues might prevent medical emergencies. The primary objective of this review was to identify advances in assistive technology devices for seniors and aging-in-place technology and to determine the level of evidence for research on remote patient monitoring, smart homes, telecare, and artificially intelligent monitoring systems. A literature review was conducted using Cumulative Index to Nursing and Allied Health Literature Plus, MEDLINE, EMBASE, Institute of Electrical and Electronics Engineers Xplore, ProQuest Central, Scopus, and Science Direct. Publications related to older people's care, independent living, and novel assistive technologies were included in the study. A total of 91 publications met the inclusion criteria. In total, four themes emerged from the data: technology acceptance and readiness, novel patient monitoring and smart home technologies, intelligent algorithm and software engineering, and robotics technologies. The results revealed that most studies had poor reference standards without an explicit critical appraisal. The use of ubiquitous in-home monitoring and smart technologies for aged people's care will increase their independence and the health care services available to them as well as improve frail elderly people's health care outcomes. This review identified four different themes that require different conceptual approaches to solution development. Although the engineering teams were focused on prototype and algorithm development, the medical science teams were concentrated on outcome research. We also identified the need to develop custom technology solutions for different aging societies. The convergence of medicine and informatics could lead to the development of new interdisciplinary research models and new assistive products for the care of older adults.

Intelligent unmanned mining is a key process in coal mine production, which has direct impact on the production safety, coal output, economic benefits and social benefits of coal mine enterprises. With the rapid development and popularization of 5G+ intelligent mines and coal mine intelligent equipment in China, the intelligentization of intelligent unmanned mining has become an important research topic. Especially with the promulgation of some Chinese policies and regulations, intelligent unmanned mining technology has become one of the key technologies of coal mine production. To understand the connotation, status quo and development trends of intelligent unmanned mining, this paper takes the relationship between key technologies and engineering application of intelligent unmanned mining in China as the perspective. It is proposed that the intelligent unmanned mining technology is in the whole process of working face mining. A research structure of unmanned follow-up operation and safe patrol is changing to the mode of intelligent adaptive mining, followed by the basic concepts and characteristics of intelligent unmanned mining. Relevant researches that maybe beneficial to the proposed research content are reviewed in four layers, which include basic theory, key technology, mining mode, and overall design system theory and technology. Finally, the current intelligent unmanned mining mode and future trends in this field in China are summarized.

Autonomous vehicle-based storage and retrieval systems are commonly used in many fulfillment centers (e.g., e-commerce warehouses), because they allow a high- and flexible-throughput capacity. In these systems, roaming robots transport loads between a storage location and a workstation. Two main variants exist: horizontal , where the robots only move horizontally and use lifts for vertical transport, and a new variant vertical , where the robots can also travel vertically in the rack. This paper builds a framework to analyze the performance of the vertical system and compare its throughput capacity with the horizontal system. We build closed queueing network models for this that, in turn, are used to optimize the design. The results show that the optimal height-to-width ratio of a vertical system is around one. Because a large number of system robots may lead to blocking and delays, we compare the effects of different robot blocking protocols on the system throughput: robot Recirculation and Wait-on-Spot. The Wait-on-Spot policy produces a higher system throughput when the number of robots in the system is small. However, for a large number of robots in the system, the Recirculation policy dominates the Wait-on-Spot policy. Finally, we compare the operational costs of the vertical and horizontal transport systems. For systems with one load/unload (L/U) point, the vertical system always produces a similar or higher system throughput with a lower operating cost compared with the horizontal system with a discrete lift. It also outperforms the horizontal system with a continuous lift in systems with two L/U points.

Pipelines, as critical infrastructure in energy transmission, municipal facilities, industrial production, and specialized equipment, are essential to national economic security and social stability. This paper systematically reviews the domestic and international research status of pipeline in-line inspection (ILI) technologies, with a focus on four major technological systems: electromagnetic, acoustic, optical, and robotic technologies. The operational principles, application scenarios, advantages, and limitations of each technology are analyzed in detail. Although existing technologies have achieved significant progress in defect detection accuracy and environmental adaptability, they still face challenges including insufficient adaptability to complex environments, the inherent trade-off between detection accuracy and efficiency, and high equipment costs. Future research directions are identified as follows: intelligent algorithm optimization for multi-physics collaborative detection, miniaturized and integrated design of inspection devices, and scenario-specific development for specialized environments. Through technological innovation and multidisciplinary integration, pipeline ILI technologies are expected to progressively realize efficient, precise, and low-cost lifecycle safety monitoring of pipelines.

In conjunction with the accelerated evolution of robotics, the advancement of robot-assisted minimally invasive surgical systems is occurring at a similarly accelerated pace, and is becoming increasingly accepted. It is employed in numerous surgical specialties, including orthopedics, and has significantly transformed traditional surgical techniques. Among these applications, knee arthroplasty represents one of the most prevalent and efficacious procedures within the domain of robot-assisted orthopedic surgery. The implementation of surgical robotic systems has the potential to enhance the precision and accuracy of surgical outcomes, facilitate reproducibility, reduce technical variability, mitigate patient discomfort, and accelerate recovery. In this paper, a literature review of the Web of Science and PubMed databases was conducted to search for all articles on orthopedic surgical robotics through November 2024. It mainly summarizes the most commonly used and widely accepted robotic systems in the field of orthopedic surgery, with a particular focus on their application in knee arthroplasty procedures. Orthopedic robotic systems can be classified into three principal categories: autonomous robotic systems, semi-autonomous robotic systems, and teleoperated robotic systems. In the context of knee arthroplasty, the characteristics of different robotic systems are examined in relation to three types of Total Knee Arthroplasty (TKA), Unicompartmental Knee Arthroplasty (UKA) and Patellofemoral Arthroplasty (PFA). In conclusion, the current state of orthopedic surgical robotics is reviewed, and future development prospects and challenges are proposed.

This self-contained introduction to the distributed control of robotic networks offers a distinctive blend of computer science and control theory. The book presents a broad set of tools for understanding coordination algorithms, determining their correctness, and assessing their complexity; and it analyzes various cooperative strategies for tasks such as consensus, rendezvous, connectivity maintenance, deployment, and boundary estimation. The unifying theme is a formal model for robotic networks that explicitly incorporates their communication, sensing, control, and processing capabilities--a model that in turn leads to a common formal language to describe and analyze coordination algorithms. Written for first- and second-year graduate students in control and robotics, the book will also be useful to researchers in control theory, robotics, distributed algorithms, and automata theory. The book provides explanations of the basic concepts and main results, as well as numerous examples and exercises. Self-contained exposition of graph-theoretic concepts, distributed algorithms, and complexity measures for processor networks with fixed interconnection topology and for robotic networks with position-dependent interconnection topology Detailed treatment of averaging and consensus algorithms interpreted as linear iterations on synchronous networks Introduction of geometric notions such as partitions, proximity graphs, and multicenter functions Detailed treatment of motion coordination algorithms for deployment, rendezvous, connectivity maintenance, and boundary estimation

The future of innovative robotic technologies and artificial intelligence (AI) in pharmacy and medicine is promising, with the potential to revolutionize various aspects of health care. These advances aim to increase efficiency, improve patient outcomes, and reduce costs while addressing pressing challenges such as personalized medicine and the need for more effective therapies. This review examines the major advances in robotics and AI in the pharmaceutical and medical fields, analyzing the advantages, obstacles, and potential implications for future health care. In addition, prominent organizations and research institutions leading the way in these technological advancements are highlighted, showcasing their pioneering efforts in creating and utilizing state-of-the-art robotic solutions in pharmacy and medicine. By thoroughly analyzing the current state of robotic technologies in health care and exploring the possibilities for further progress, this work aims to provide readers with a comprehensive understanding of the transformative power of robotics and AI in the evolution of the healthcare sector. Striking a balance between embracing technology and preserving the human touch, investing in R&D, and establishing regulatory frameworks within ethical guidelines will shape a future for robotics and AI systems. The future of pharmacy and medicine is in the seamless integration of robotics and AI systems to benefit patients and healthcare providers.