Search Results Heading

MBRLSearchResults

mbrl.module.common.modules.added.book.to.shelf
Title added to your shelf!
View what I already have on My Shelf.
Oops! Something went wrong.
Oops! Something went wrong.
While trying to add the title to your shelf something went wrong :( Kindly try again later!
Are you sure you want to remove the book from the shelf?
Oops! Something went wrong.
Oops! Something went wrong.
While trying to remove the title from your shelf something went wrong :( Kindly try again later!
    Done
    Filters
    Reset
  • Discipline
      Discipline
      Clear All
      Discipline
  • Is Peer Reviewed
      Is Peer Reviewed
      Clear All
      Is Peer Reviewed
  • Item Type
      Item Type
      Clear All
      Item Type
  • Subject
      Subject
      Clear All
      Subject
  • Year
      Year
      Clear All
      From:
      -
      To:
  • More Filters
1 result(s) for "solar photocatalytic reactor (spcr)"
Sort by:
Sequential biological and solar photocatalytic treatment system for greywater treatment
In this study, sequencing batch reactor (SBR) using anaerobic/aerobic/anoxic process was coupled to a solar photocatalytic reactor (SPCR) for greywater treatment. The greywater effluent from SBR (operated at the optimal condition: 6.8 h hydraulic retention time (HRT), 0.7 Volumetric exchange ratio (VER) and 7.94 d solids retention time (SRT) with optimal corn cob adsorbent dosage (0.5 g/L)) was fed to the SPCR (operated at optimal conditions: pH – 3, H2O2 dosage – 1 g/L, catalyst dosage – 5 g/L). Chemical oxygen demand (COD) removal of 92.8±0.5% and ∼100% were achieved in SBR and SBR-SPCR, respectively. Similarly, total organic carbon (TOC) removal of 91±0.9% and ∼100% were observed in SBR and SBR-SPCR, respectively. After SBR treatment, average total nitrogen (TN) removal of 84% was found and this TN removal increased to 93% after combined SBR-SPCR treatment. The maximum PO43−_P reduction of 80±1.5% % was achieved with SBR-adsorption system. In addition, a maximum of 87±0.9% of net PO43−_P removal was reached after SBR-SPCR treatment. 58.9±2.3% BP (benzophenone-3) removal was obtained in the SBR while the integration of SBR and SPCR treatment was resulted in 100% BP removal. An effective anionic surfactant (AS) removal rate (80.1±2.2%) was observed in the SBR phase, which further improved to 94.9±1% at the end of 4 h SPCR treatment.