Explore the vast range of titles available.

Sulfonic resins are highly efficient cation exchangers widely used for metal removal from aqueous solutions. Herein, a new sulfonation process is designed for the sulfonation of algal/PEI composite (A*PEI, by reaction with 2-propylene-1-sulfonic acid and hydroxylamine-O-sulfonic acid). The new sulfonated functionalized sorbent (SA*PEI) is successfully tested in batch systems for strontium recovery first in synthetic solutions before investigating with multi-component solutions and final validation with seawater samples. The chemical modification of A*PEI triples the sorption capacity for Sr(II) at pH 4 with a removal rate of up to 7% and 58% for A*PEI and SA*PEI, respectively (with SD: 0.67 g L−1). FTIR shows the strong contribution of sulfonate groups for the functionalized sorbent (in addition to amine and carboxylic groups from the support). The sorption is endothermic (increase in sorption with temperature). The sulfonation improves thermal stability and slightly enhances textural properties. This may explain the fast kinetics (which are controlled by the pseudo-first-order rate equation). The sulfonated sorbent shows a remarkable preference for Sr(II) over competitor mono-, di-, and tri-valent metal cations. Sorption properties are weakly influenced by the excess of NaCl; this can explain the outstanding sorption properties in the treatment of seawater samples. In addition, the sulfonated sorbent shows excellent stability at recycling (for at least 5 cycles), with a loss in capacity of around 2.2%. These preliminary results show the remarkable efficiency of the sorbent for Sr(II) removal from complex solutions (this could open perspectives for the treatment of contaminated seawater samples).

The recovery of strategic metals such as rare earth elements (REEs) requires the development of new sorbents with high sorption capacities and selectivity. The bi-functionality of sorbents showed a remarkable capacity for the enhancement of binding properties. This work compares the sorption properties of magnetic chitosan (MC, prepared by dispersion of hydrothermally precipitated magnetite microparticles (synthesized through Fe(II)/Fe(III) precursors) into chitosan solution and crosslinking with glutaraldehyde) with those of the urea derivative (MC-UR) and its sulfonated derivative (MC-UR/S) for cerium (as an example of REEs). The sorbents were characterized by FTIR, TGA, elemental analysis, SEM-EDX, TEM, VSM, and titration. In a second step, the effect of pH (optimum at pH 5), the uptake kinetics (fitted by the pseudo-first-order rate equation), the sorption isotherms (modeled by the Langmuir equation) are investigated. The successive modifications of magnetic chitosan increases the maximum sorption capacity from 0.28 to 0.845 and 1.25 mmol Ce g−1 (MC, MC-UR, and MC-UR/S, respectively). The bi-functionalization strongly increases the selectivity of the sorbent for Ce(III) through multi-component equimolar solutions (especially at pH 4). The functionalization notably increases the stability at recycling (for at least 5 cycles), using 0.2 M HCl for the complete desorption of cerium from the loaded sorbent. The bi-functionalized sorbent was successfully tested for the recovery of cerium from pre-treated acidic leachates, recovered from low-grade cerium-bearing Egyptian ore.

The strong demand for rare-earth elements (REEs) is driven by their wide use in high-tech devices. New processes have to be developed for valorizing low-grade ores or alternative metal sources (such as wastes and spent materials). The present work contributed to the development of new sorbents for the recovery of rare earth ions from aqueous solutions. Functionalized mesoporous silica composite was synthesized by grafting diethylenetriamine onto composite support. The physical and chemical properties of the new sorbent are characterized using BET, TGA, elemental analysis, titration, FTIR, and XPS spectroscopies to identify the reactive groups (amine groups: 3.25 mmol N g−1 and 3.41 by EA and titration, respectively) and their mode of interaction with Nd(III) and Gd(III). The sorption capacity at the optimum pH (i.e., 4) reaches 0.9 mmol Nd g−1 and 1 mmol Gd g−1. Uptake kinetics are modeled by the pseudo-first-order rate equation (equilibrium time: 30–40 min). At pH close to 4–5, the sorbent shows high selectivity for rare-earth elements against alkali-earth elements. This selectivity is confirmed by the efficient recovery of REEs from acidic leachates of gibbsite ore. After elution (using 0.5 M HCl solutions), selective precipitation (using oxalate solutions), and calcination, pure rare earth oxides were obtained. The sorbent shows promising perspective due to its high and fast sorption properties for REEs, good recycling, and high selectivity.

The recovery of three rare earth (RE) metals ions [Yb(III), Dy(III) and Nd(III), belonging to heavy, mild and light REs, respectively] was investigated using hybrid chitosan-magnetic nano-based particles functionalized by diethylenetriamine (DETA). The effect of pH on sorption performance was analyzed: the optimum initial pH value was found close to 5 (equilibrium pH value close to 6.5). The nanometric size of sorbent particles (30–50 nm) minimized the contribution of resistance to intraparticle diffusion on the control of uptake kinetics, which is efficiently modeled using the pseudo-second order rate equation: under selected experimental conditions the contact time required for reaching equilibrium was less than 1 h. Sorption isotherms were efficiently modeled using the Langmuir equation: maximum sorption capacities reached about 50 mg metal g⁻¹, regardless of the RE. The temperature had a very limited effect on sorption capacity (in the range 300–320 K). The thermodynamic parameters were determined: the sorption was endothermic (positive values of ΔH°), spontaneous (negative values of ΔG°) and contributed to increasing the disorder of the system (positive values of ΔS°). The three REs have similar sorption properties on DETA-functionalized chitosan magnetic nano-based particles: the selective separation of these elements seems to be difficult. The sorbed metal ions can be removed from loaded sorbents using thiourea, and the sorbent can be recycled for at least five sorption/desorption cycles with a limited loss in sorption performance (by less than 6 %). The saturation magnetization was close to 20 emu g⁻¹; this means that nano-based superparamagnetic particles can be readily recovered by an external magnetic field, making the processing of these materials easy.

With the target of recovering rare earth elements (REEs) from acidic leachates, a new functionalized hydrogel was designed, based on the phosphorylation of algal/polyethyleneimine beads. The functionalization strongly increased the sorption efficiency of the raw material for Pr(III) and Tm(III). Diverse techniques were used for characterizing this new material and correlating the sorption performances and mechanisms to the physicochemical structure of the sorbent. First, the work characterized the sorption properties from synthetic solutions with the usual procedures (study of pH effect, uptake kinetics, sorption isotherms, metal desorption and sorbent recycling, and selectivity from multi-element solutions). Optimum pH was found close to 5; sorption isotherms were fitted by the Langmuir equation (maximum sorption capacities close to 2.14 mmol Pr g−1 and 1.57 mmol Tm g−1). Fast uptake kinetics were modeled by the pseudo-second order rate equation. The sorbent was highly selective for REEs against alkali-earth and base metals. The sorbent was remarkably stable for sorption and desorption operation (using 0.2 M HCl/0.5 M CaCl2 solutions). The sorbent was successfully applied to the leachates of Egyptian ore (pug leaching) after a series of pre-treatments (precipitation steps), sorption, and elution. The selective precipitation of REEs using oxalic acid allows for the recovery of a pure REE precipitate.

A new magnetic functionalized derivative of chitosan is synthesized and characterized for the sorption of metal ions (environmental applications and metal valorization). The chemical modification of the glycine derivative of chitosan consists of: activation of the magnetic support with epichlorohydrin, followed by reaction with either glycine to produce the reference material (i.e., Gly sorbent) or glycine ester hydrochloride, followed by hydrazinolysis to synthesize the hydrazide functionalized sorbent (i.e., HGly sorbent). The materials are characterized by titration, elemental analysis, FTIR analysis (Fourrier-transform infrared spectrometry), TGA analysis (thermogravimetric analysis) and with SEM-EDX (scanning electron microscopy coupled to energy dispersive X-ray analysis). The sorption performances for U(VI), Cu(II), and Zn(II) are tested in batch systems. The sorption performances are compared for Gly and HGly taking into account the effect of pH, the uptake kinetics (fitted by the pseudo-second order rate equation), and the sorption isotherms (described by the Langmuir and the Sips equations). The sorption capacities of the modified sorbent reach up to 1.14 mmol U g−1, 1.69 mmol Cu g−1, and 0.85 mmol Zn g−1. In multi-metal solutions of equimolar concentration, the chemical modification changes the preferences for given metal ions. Metal ions are desorbed using 0.2 M HCl solutions and the sorbents are re-used for five cycles of sorption/desorption without significant loss in performances.

The recovery of platinum from industrial waste is of critical importance. Usually, the recovery method is to dissolve the solid waste with acid to form a solution where platinum mainly exists in the form of Pt(IV). Therefore, it is urgent to efficiently and selectively adsorb Pt(IV) ions from acid leachates. In this study, a highly efficient adsorbent was developed by grafting of carboxyl and amine groups onto melamine sponge with alginate-Ca and polyethylenimine-glutaraldehyde (ML/ACPG). Combination of SEM, FTIR and XPS showed that the ML/ACPG sponge had a tree structure and the amino, carboxyl and hydroxyl groups were successfully introduced. Maximum adsorption capacity of ML/ACPG sponge reached up to 101.1 mg/L at pH of 1 (optimum initial pH value). The Pt(IV) ions were readily desorbed (within 60–80 min) using 0.1 M HCl + 0.025 M thiourea solution. Desorption efficiency remained higher than 83.3% while adsorption capacity decreased by less than 6.0% after 5 cycles operation. The ML/ACPG sponge was stable in 3 M of HNO 3 , NaCl after shaking for 72 h at 300 rpm with mass loss less than 2.5%. The mechanism of Pt(IV) adsorption onto ML/ACPG sponge mainly involved coordination by electrostatic attraction and carboxyl groups by protonated amine groups. The above results confirmed that the ML/ACPG sponge has a good practical application potential for Pt(IV) recovery from acid leachates.

Silver ions in wastewater streams are a major pollutant and a threat to human health. Given the increasing demand and relative scarcity of silver, these streams could be a lucrative source to extract metallic silver. Wastewater is a complex mixture of many different metal salts, and developing recyclable sorbents with high specificity towards silver ions remains a major challenge. Here we report that molybdenum oxide (MoO x ) adsorbent with mixed-valence (Mo(V) and Mo(VI)) demonstrates high selectivity (distribution coefficient of 6437.40 mL g −1 ) for Ag + and an uptake capacity of 2605.91 mg g −1 . Our experimental results and density functional theory calculations illustrate the mechanism behind Ag + adsorption and reduction. Our results show that Mo(V) species reduce Ag + to metallic Ag, which decreases the energy barrier for subsequent Ag + reductions, accounting for the high uptake of Ag + from wastewater. Due to its high selectivity, MoO x favorably adsorbs Ag + even in the presence of interfering ions. High selective recovery of Ag + from wastewater (recovery efficiency = 97.9%) further supports the practical applications of the sorbent. Finally, MoO x can be recycled following silver recovery while maintaining a recovery efficiency of 97.1% after five cycles. The method is expected to provide a viable strategy to recover silver from wastewater. Silver ions in wastewater are a major health hazard, and there is an urgent need to develop methods to reliably extract them. Here, the authors show that mixed-valence molybdenum oxide can selectively adsorb and reduce Ag + from wastewater and be easily recycled while maintaining high selectivity towards Ag + .

With the advancement of global carbon reduction efforts and the rapid development of battery industries, the scale of spent lithium-ion batteries (LIBs) has increased dramatically. Extracting lithium from spent LIBs to synthesize Li4SiO4 sorbents not only addresses the challenge of battery recycling but also reduces the production cost of CO2 sorbents, making it a research hotspot. However, the CO2 adsorption behavior of these sorbents under the effect of impurities may differ from the traditional Li4SiO4, and there is a lack of systematic research on the adsorption kinetics. To address this issue, two Li4SiO4 sorbents are prepared from spent ternary LIBs, and their adsorption kinetics are comprehensively investigated using classical kinetic models. Results show that the reaction order of LSO and Na-LSO is 0.41 and 1.63, respectively, with activation energies of 72.93 kJ/mol and 99.23 kJ/mol in the initial kinetic-controlled stage, and 323.15 kJ/mol and 176.79 kJ/mol in the following diffusion-controlled stage. In the cyclic processes, loss-in-capacity is observed on LSO due to the simultaneous decrease in rate constants in both the kinetic and diffusion-controlled stages, while Na-LSO could almost maintain its capacity by having a much bigger rate constant during the kinetic-controlled stage. This study reveals the adsorption kinetics of Li4SiO4 prepared from spent LIBs and could provide theoretical support for the targeted design of efficient and low-cost CO2 sorbents.

The use of Polypropylene PP in disposable items such as face masks, gloves, and personal protective equipment has increased exponentially during and after the COVID-19 pandemic, contributing significantly to microplastics and nanoplastics in the environment. Upcycling of waste PP provides a useful alternative to traditional thermal and mechanical recycling techniques. It transforms waste PP into useful products, minimizing its impact on the environment. Herein, we synthesized an oil-sorbent pouch using waste PP, which comprises superposed microporous and fibrous thin films of PP using spin coating. The pouch exhibited super-fast uptake kinetics and reached its saturation in fewer than five minutes with a high oil uptake value of 85 g/g. Moreover, it displayed high reusability and was found to be effective in absorbing oil up to seven times when mechanically squeezed between each cycle, demonstrating robust oil-sorption capabilities. This approach offers a potential solution for managing plastic waste while promoting a circular economy.