Explore the vast range of titles available.

Using a novel strategy, amphiphilic polyphosphoesters based on poly(oxyethylene H-phosphonate)s (POEHP) with different poly(ethylene glycol) segment lengths and aliphatic alcohols with various alkyl chain lengths were synthesized using polycondensation reactions. They were characterized by 1H NMR, 13C H NMR 31P NMR, IR, and size exclusion chromatography (SEC). The effects of the polymer structure on micelle formation and stability, micelle size, and critical micelle temperature were studied via dynamic light scattering (DLS). The hydrophilic/hydrophobic balance of these polymers can be controlled by changing the chain lengths of hydrophilic PEG and hydrophobic alcohols. A solubilizing test, using Sudan III, revealed that hydrophobic substances can be incorporated inside the hydrophobic core of polymer associates. Loading capacity depends on the length of alkyl side chains. The results obtained indicate that these structurally flexible polymers have the potential as drug carriers.

The process of mucoadhesion has been widely studied using a wide variety of methods, which are influenced by instrumental variables and experiment design, making the comparison between the results of different studies difficult. The aim of this work was to standardize the conditions of the detachment test and the rheological methods of mucoadhesion assessment for semisolids, and introduce a texture profile analysis (TPA) method. A factorial design was developed to suggest standard conditions for performing the detachment force method. To evaluate the method, binary polymeric systems were prepared containing poloxamer 407 and Carbopol 971P®, Carbopol 974P®, or Noveon® Polycarbophil. The mucoadhesion of systems was evaluated, and the reproducibility of these measurements investigated. This detachment force method was demonstrated to be reproduceable, and gave different adhesion when mucin disk or ex vivo oral mucosa was used. The factorial design demonstrated that all evaluated parameters had an effect on measurements of mucoadhesive force, but the same was not observed for the work of adhesion. It was suggested that the work of adhesion is a more appropriate metric for evaluating mucoadhesion. Oscillatory rheology was more capable of investigating adhesive interactions than flow rheology. TPA method was demonstrated to be reproducible and can evaluate the adhesiveness interaction parameter. This investigation demonstrates the need for standardized methods to evaluate mucoadhesion and makes suggestions for a standard study design.

Hydroxy-functional poly(propenyl ether)s are promising thermoresponsive materials; here we establish a controlled synthesis via living cationic polymerization of silyl-protected monomers. Among the silyl protecting groups examined, only tert-butyldiphenylsilyl (TBDPS) enabled living cationic polymerization. The living cationic polymerization of tert-butyldiphenylsiloxybutyl propenyl ether (TBDPSBPE) afforded a high-molecular-weight polymer (poly(TBDPSBPE)) with a narrow molecular weight distribution (Mn = 12,900; Mw/Mn = 1.22). Additionally, chain propagation continued in monomer addition experiments, and the molecular weight increased further with a narrow molecular weight distribution, confirming the success of living cationic polymerization. Poly(TBDPSBPE) was successfully desilylated to afford poly(HBPE) with a narrow molecular weight distribution. Poly(HBPE) exhibited a glass transition temperature (Tg) of 44 °C, 82 °C higher than that of the corresponding polymer without β-methyl groups, poly(HBVE). The enhanced thermal properties of poly(HBPE) were attributed to the steric hindrance of the β-methyl group, which fixes the position of the hydroxy group and allows stronger hydrogen bonding. To investigate the aqueous thermoresponse, a hydroxylated analog with a shorter side-chain spacer (poly(HPPE)) was synthesized, and poly(HPPE) exhibited lower critical solution temperature (LCST)-type phase separation in water with a cloud-point temperature (Tcp) of 6 °C, showing reversible transitions with thermal hysteresis.

Poly-N-Vinylcaprolactam (PNVCL) is a thermoresponsive polymer that exhibits lower critical solution temperature (LCST) between 25 and 50 °C. Due to its alleged biocompatibility, this polymer is becoming popular for biomedical and environmental applications. PNVCL with carboxyl terminations has been widely used for the preparation of thermoresponsive copolymers, micro- and nanogels for drug delivery and oncological therapies. However, the fabrication of such specific targeting devices needs standardized and reproducible preparation methods. This requires a deep understanding of how the miscibility behavior of the polymer is affected by its structural properties and the solution environment. In this work, PNVCL-COOH polymers were prepared via free radical polymerization (FRP) in order to exhibit LCST between 33 and 42 °C. The structural properties were investigated with NMR, FT-IR and conductimetric titration and the LCST was calculated via UV-VIS and DLS. The LCST is influenced by the molecular mass, as shown by both DLS and viscosimetric values. Finally, the behavior of the polymer was described as function of its concentration and in presence of different biologically relevant environments, such as aqueous buffers, NaCl solutions and human plasma.

Mimicking nature, the reversible isomerization of hydrophobic dyes in aqueous solutions is appealing for bio-applications. Here, we report on the reversible isomerization of first-generation solvatochromic donor-acceptor Stenhouse adducts (DASAs) in water within dendritic matrices, realized either through the dendronization of DASAs or the incorporation of DASA pendants into dendronized copolymers. These dendritic macromolecules contain three-fold dendritic oligoethylene glycols (OEGs), which afford the macromolecules water-solubility and unprecedented thermoresponsive behavior. The thermoresponsive behavior of both dendronized DASAs and dendronized copolymers is dominated by the peripherals of dendritic OEGs. However, the hydrophilicity of the acceptor from DASA moieties also play a role in mediating their thermal phase transitions, and more importantly, tailor the hydrophobic interactions between dendritic OEGs and DASA moieties. Intriguingly, dendritic topologies contribute confinement to encapsulate the DASA moieties through crowding effects, and cooperative interactions from the crowded dendritic OEGs modulate the DASA moieties with different isomerization in aqueous media. The thermally induced collapse of dendritic OEGs, accompanied by the aggregation of dendritic macromolecules, leads to the formation of hydrophobic domains, which exert enhanced crowding effects to efficiently encapsulate the DASA moieties. Compared to the low molar mass of dendronized DASAs, thermally collapsed dendronized copolymers can efficiently retard the hydration of DASA pendants through cooperation between neighboring dendritic OEGs and afford the DASA pendants with better confined microenvironments to mediate their isomerization recovery by up to 90% from a cyclic charged (hydrophilic) state into a noncharged (hydrophobic) linear state in water. This dendritic confinement exhibits excellent fatigue resistance after several cycles of alternating photo-irradiation and thermal annealing at elevated temperatures.

Immense work has been conducted in the field of thermoresponsive polymers specifically of lower critical solution temperature (LCST) type, but upper critical solution temperature (UCST) type polymers remain a significantly unexplored domain. However, in recent years, UCST polymers have attracted increased attention as evidenced by the rise in publications in the same domain, and therefore, this review is an attempt to compile the reported UCST-type polymers. Unlike LCST, UCST polymers are insoluble at low temperature but solubilize in a given solvent as the temperature increases. The synthesis approaches and applications of reported UCST polymers are discussed in this article. Emphasis has been given to the polymers exhibiting UCST behavior in aqueous medium, due to the obvious advantage of their wide applicability. It is quite apparent from this study that the attempts to synthesize novel polymers and copolymers exhibiting UCST has faced an upsurge, but their application part still requires considerable attention.

The ability of thermoresponsive polymers to respond to temperature with a reversible conformational change makes them promising ‘smart’ materials for solutions in medical and biotechnological applications. In this work, two such polymers and structural isomers were studied: poly(N-isopropyl acrylamide) (PNiPAm) and poly(2-isopropyl-2-oxazoline) (PiPOx). We compare the critical solution temperatures (CST) of these polymers in D2O and H2O in the presence of Hofmeister series salts, as results obtained under these different solvent conditions are often compared. D2O has a higher dipole moment and electronegativity than H2O, which could significantly alter the CST transition. We used two complementary methods to measure the CST, dynamic light scattering (DLS) and differential scanning calorimetry (DSC) and found that the CST decreased significantly in D2O compared to H2O. In the presence of highly concentrated kosmotropes, the CST of both polymers decreased in both solvents. The influence of the kosmotropic anions was smaller than the water isotope effect at low ionic strengths but considerably higher at physiological ionic strengths. However, the Hofmeister anion effect was quantitatively different in H2O than in D2O, with the largest relative differences observed for Cl−, where the CSTs in D2O decreased more than in H2O measured by DLS but less by DSC. PiPOx was more sensitive than PNiPAm to the presence of chaotropes. It exhibited much higher transition enthalpies and multistep transitions, especially in aqueous solutions. Our results highlight that measurements of thermoresponsive polymer properties in D2O cannot be compared directly or quantitatively to application conditions or even measurements performed in H2O.

Sets of the nonionic polymers poly(N-vinyl isobutyramide) (pNVIBAm) and poly(N-isopropyl methacrylamide) (pNIPMAm) are synthesized by radical polymerization covering the molar mass range from about 20,000 to 150,000 kg mol−1, and their thermoresponsive and solvent-responsive behaviors in aqueous solution are studied. Both polymers feature a lower critical solution temperature (LCST) apparently of the rare so-called type II, as characteristic for their well-studied analogue poly(N-isopropyl acrylamide) (pNIPAm). Moreover, in analogy to pNIPAm, both polymers exhibit co-nonsolvency behavior in mixtures of water with several co-solvents, including short-chain alcohols as well as a range of polar aprotic solvents. While the cloud points of the aqueous solutions are a few degrees higher than those for pNIPAm and increase in the order pNIPAm < pNVIBAm < pNIPMAm, the co-nonsolvency behavior becomes less pronounced in the order pNIPAm > pNVIBAm > pNIPMAm. Exceptionally, pNIPMAm does not show co-nonsolvency in mixtures of water and N,N-dimethylformamide.

For the preparation of thermoresponsive copolymers, for e.g., tissue engineering scaffolds or drug carriers, a precise control of the synthesis parameters to set the lower critical solution temperature (LCST) is required. However, the correlations between molecular parameters and LCST are partially unknown and, furthermore, LCST is defined as an exact temperature, which oversimplifies the real situation. Here, random N-isopropylacrylamide (NIPAM)/dopamine methacrylamide (DMA) copolymers were prepared under a systematical variation of molecular weight and comonomer amount and their LCST in water studied by calorimetry, turbidimetry, and rheology. Structural information was deduced from observed transitions clarifying the contributions of molecular weight, comonomer content, end-group effect or polymerization degree on LCST, which were then statistically modeled. This proved that the LCST can be predicted through molecular structure and conditions of the solutions. While the hydrophobic DMA lowers the LCST especially the onset, polymerization degree has an important but smaller influence over all the whole LCST range.