Explore the vast range of titles available.

Applications of remote sensing using unmanned aerial vehicle (UAV) in agriculture has proved to be an effective and efficient way of obtaining field information. In this study, we validated the feasibility of utilizing multi-temporal color images acquired from a low altitude UAV-camera system to monitor real-time wheat growth status and to map within-field spatial variations of wheat yield for smallholder wheat growers, which could serve as references for site-specific operations. Firstly, eight orthomosaic images covering a small winter wheat field were generated to monitor wheat growth status from heading stage to ripening stage in Hokkaido, Japan. Multi-temporal orthomosaic images indicated straightforward sense of canopy color changes and spatial variations of tiller densities. Besides, the last two orthomosaic images taken from about two weeks prior to harvesting also notified the occurrence of lodging by visual inspection, which could be used to generate navigation maps guiding drivers or autonomous harvesting vehicles to adjust operation speed according to specific lodging situations for less harvesting loss. Subsequently orthomosaic images were geo-referenced so that further study on stepwise regression analysis among nine wheat yield samples and five color vegetation indices (CVI) could be conducted, which showed that wheat yield correlated with four accumulative CVIs of visible-band difference vegetation index (VDVI), normalized green-blue difference index (NGBDI), green-red ratio index (GRRI), and excess green vegetation index (ExG), with the coefficient of determination and RMSE as 0.94 and 0.02, respectively. The average value of sampled wheat yield was 8.6 t/ha. The regression model was also validated by using leave-one-out cross validation (LOOCV) method, of which root-mean-square error of predication (RMSEP) was 0.06. Finally, based on the stepwise regression model, a map of estimated wheat yield was generated, so that within-field spatial variations of wheat yield, which was usually seen as general information on soil fertility, water potential, tiller density, etc., could be better understood for applications of site-specific or variable-rate operations. Average yield of the studied field was also calculated according to the map of wheat yield as 7.2 t/ha.

The spatial resolution of in situ unmanned aerial vehicle (UAV) multispectral images has a crucial effect on crop growth monitoring and image acquisition efficiency. However, existing studies about optimal spatial resolution for crop monitoring are mainly based on resampled images. Therefore, the resampled spatial resolution in these studies might not be applicable to in situ UAV images. In order to obtain optimal spatial resolution of in situ UAV multispectral images for crop growth monitoring, a RedEdge Micasense 3 camera was installed onto a DJI M600 UAV flying at different heights of 22, 29, 44, 88, and 176m to capture images of seedling rapeseed with ground sampling distances (GSD) of 1.35, 1.69, 2.61, 5.73, and 11.61 cm, respectively. Meanwhile, the normalized difference vegetation index (NDVI) measured by a GreenSeeker (GS-NDVI) and leaf area index (LAI) were collected to evaluate the performance of nine vegetation indices (VIs) and VI*plant height (PH) at different GSDs for rapeseed growth monitoring. The results showed that the normalized difference red edge index (NDRE) had a better performance for estimating GS-NDVI (R2 = 0.812) and LAI (R2 = 0.717), compared with other VIs. Moreover, when GSD was less than 2.61 cm, the NDRE*PH derived from in situ UAV images outperformed the NDRE for LAI estimation (R2 = 0.757). At oversized GSD (≥5.73 cm), imprecise PH information and a large heterogeneity within the pixel (revealed by semi-variogram analysis) resulted in a large random error for LAI estimation by NDRE*PH. Furthermore, the image collection and processing time at 1.35 cm GSD was about three times as long as that at 2.61 cm. The result of this study suggested that NDRE*PH from UAV multispectral images with a spatial resolution around 2.61 cm could be a preferential selection for seedling rapeseed growth monitoring, while NDRE alone might have a better performance for low spatial resolution images.

In this work, we propose a geolocation framework for distant ground targets integrating laser rangefinder sensors with multimodal visual servo control. By simulating binocular visual servo measurements through monocular visual servo tracking at fixed time intervals, our approach requires only single-session sensor attitude correction calibration to accurately geolocalize multiple targets during a single flight, which significantly enhances operational efficiency in multi-target geolocation scenarios. We design a step-convergent target geolocation optimization algorithm. By adjusting the step size and the scale factor of the cost function, we achieve fast accuracy convergence for different UAV reconnaissance modes, while maintaining the geolocation accuracy without divergence even when the laser ranging sensor is turned off for a short period. The experimental results show that through the UAV’s continuous reconnaissance measurements, the geolocalization error of remote ground targets based on our algorithm is less than 7 m for 3000 m, and less than 3.5 m for 1500 m. We have realized the fast and high-precision geolocalization of remote targets on the ground under the high-altitude reconnaissance of UAVs.

Cotton Verticillium wilt is a common fungal disease during the growth of cotton, leading to the yellowing of leaves, stem dryness, and root rot, severely affecting the yield and quality of cotton. Current monitoring methods for Verticillium wilt mainly rely on manual inspection and field investigation, which are inefficient and costly, and the methods of applying pesticides in cotton fields are singular, with issues of low pesticide efficiency and uneven application. This study aims to combine UAV remote sensing monitoring of cotton Verticillium wilt with the precision spraying characteristics of agricultural drones, to provide a methodological reference for monitoring and precision application of pesticides for cotton diseases. Taking the cotton fields of Shihezi City, Xinjiang as the research subject, high-resolution multispectral images were collected using drones. Simultaneously, 150 sets of field samples with varying degrees of Verticillium wilt were collected through ground data collection, utilizing data analysis methods such as partial least squares regression (PLSR) and neural network models; additionally, a cotton Verticillium wilt monitoring model based on drone remote sensing images was constructed. The results showed that the estimation accuracy R2 of the PLSR and BP neural network models based on EVI, RENDVI, SAVI, MSAVI, and RDVI vegetation indices were 0.778 and 0.817, respectively, with RMSE of 0.126 and 0.117, respectively. Based on this, an analysis of the condition of the areas to be treated was performed, combining the operational parameters of agricultural drones, resulting in a prescription map for spraying against cotton Verticillium wilt.

[Objectives] To explore the relationship between vegetation index and forest surface fuel load. [Methods] UAV multispectral remote sensing was used to obtain large-scale forest images and obtain structural data of forest surface fuel load. This experimental area was located in Gaoming District, Foshan City, Guangdong Province. The average surface fuel load of the experimental area was as high as 39.33 t/ha, and the forest surface fuel load of Pinus elliottii was the highest. [Results] The normalized difference vegetation index (NDVI) and enhanced vegetation index (EVI) had moderately strong correlation with the forest surface fuel load. The regression model of NDVI (X) and forest surface fuel load (Y) was established: Y = -5.935 4X + 8.466 3, and the regression model of EVI (X) and forest surface fuel load (Y) was established: Y = -5.848 5X + 6.727 1. The study also found that the linear relationship between NDVI and surface fuel load was more significant. [Conclusions] Both NDVI and EVI have moderately strong correlations with forest surface fuel load. NDVI is moderately or strongly correlated with the surface fuel load of Pinus massoniana forest, shrub grassland, broad-leaf forest and bamboo forest, while EVI is only strongly correlated with surface fuel load of broad-leaf forest and bamboo forest. It is expected that the relationship between other vegetation indices and forest surface fuel load can be obtained by the method in this study, so as to find a more universal vegetation index for calculating surface fuel load.

Emerging technologies such as Internet of Things (IoT) can provide significant potential in Smart Farming and Precision Agriculture applications, enabling the acquisition of real-time environmental data. IoT devices such as Unmanned Aerial Vehicles (UAVs) can be exploited in a variety of applications related to crops management, by capturing high spatial and temporal resolution images. These technologies are expected to revolutionize agriculture, enabling decision-making in days instead of weeks, promising significant reduction in cost and increase in the yield. Such decisions enable the effective application of farm inputs, supporting the four pillars of precision agriculture, i.e., apply the right practice, at the right place, at the right time and with the right quantity. However, the actual proliferation and exploitation of UAVs in Smart Farming has not been as robust as expected mainly due to the challenges confronted when selecting and deploying the relevant technologies, including the data acquisition and image processing methods. The main problem is that still there is no standardized workflow for the use of UAVs in such applications, as it is a relatively new area. In this article, we review the most recent applications of UAVs for Precision Agriculture. We discuss the most common applications, the types of UAVs exploited and then we focus on the data acquisition methods and technologies, appointing the benefits and drawbacks of each one. We also point out the most popular processing methods of aerial imagery and discuss the outcomes of each method and the potential applications of each one in the farming operations.

Over time, the use of UAVs (unmanned aerial vehicles)/drones has increased across several civil and military application domains. Such domains include real-time monitoring, remote sensing, wireless coverage in disaster areas, search and rescue, product delivery, surveillance, security, agriculture, civil infrastructure inspection, and the like. This rapid growth is opening doors to numerous opportunities and conveniences in everyday life. On the other hand, security and privacy concerns for unmanned aerial vehicles/drones are progressively increasing. With limited standardization and regulation of unmanned aerial vehicles/drones, security and privacy concerns are growing. This paper presents a brief analysis of unmanned aerial vehicle's/drones security and privacy-related concerns. The paper also presents countermeasures and recommendations to address such concerns. While laying out a brief survey of unmanned aerial vehicles/drones, the paper also provides readers with up-to-date information on existing regulations, classification, architecture, and communication methods. It also discusses application areas, vulnerabilities, existing countermeasures against different attacks, and related limitations. In the end, the paper concludes with a discussion on open research areas and recommendations on how the security and privacy of unmanned aerial vehicles can be improved.

Controlling crop diseases and pests is essential for intelligent agriculture (IA) due to the significant reduction in crop yield and quality caused by these problems. In recent years, the remote sensing (RS) areas has been prevailed over by unmanned aerial vehicle (UAV)-based applications. Herein, by using methods such as keyword co-contribution analysis and author co-occurrence analysis in bibliometrics, we found out the hot-spots of this field. UAV platforms equipped with various types of cameras and other advanced sensors, combined with artificial intelligence (AI) algorithms, especially for deep learning (DL) were reviewed. Acknowledging the critical role of comprehending crop diseases and pests, along with their defining traits, we provided a concise overview as indispensable foundational knowledge. Additionally, some widely used traditional machine learning (ML) algorithms were presented and the performance results were tabulated to form a comparison. Furthermore, we summarized crop diseases and pests monitoring techniques using DL and introduced the application for prediction and classification. Take it a step further, the newest and the most concerned applications of large language model (LLM) and large vision model (LVM) in agriculture were also mentioned herein. At the end of this review, we comprehensively discussed some deficiencies in the existing research and some challenges to be solved, as well as some practical solutions and suggestions in the near future.

This review paper provides insights into optimization strategies for Unmanned Aerial Vehicles (UAVs) in a variety of surveillance tasks and scenarios. From basic path planning to complex mission execution, we comprehensively evaluate the multifaceted role of UAVs in critical areas such as infrastructure inspection, security surveillance, environmental monitoring, archaeological research, mining applications, etc. The paper analyzes in detail the effectiveness of UAVs in specific tasks, including power line and bridge inspections, search and rescue operations, police activities, and environmental monitoring. The focus is on the integration of advanced navigation algorithms and artificial intelligence technologies with UAV surveillance and the challenges of operating in complex environments. Looking ahead, this paper predicts trends in cooperative UAV surveillance networks and explores the potential of UAVs in more challenging scenarios. This review not only provides researchers with a comprehensive analysis of the current state of the art, but also highlights future research directions, aiming to engage and inspire readers to further explore the potential of UAVs in surveillance missions.

Agriculture is the primary source of income in developing countries like India. Agriculture accounts for 17 percent of India’s total GDP, with almost 60 percent of the people directly or indirectly employed. While researchers and planters focus on a variety of elements to boost productivity, crop loss due to disease is one of the most serious issues they confront. Crop growth monitoring and early detection of pest infestations are still a problem. With the expansion of cultivation to wider fields, manual intervention to monitor and diagnose insect and pest infestations is becoming increasingly difficult. Failure to apply on time fertilizers and pesticides results in more crop loss and so lower output. Farmers are putting in greater effort to conserve crops, but they are failing most of the time because they are unable to adequately monitor the crops when they are infected by pests and insects. Pest infestation is also difficult to predict because it is not evenly distributed. In the recent past, modern equipment, tools, and approaches have been used to replace manual involvement. Unmanned aerial vehicles serve a critical role in crop disease surveillance and early detection in this setting. This research attempts to give a review of the most successful techniques to have precision-based crop monitoring and pest management in agriculture fields utilizing unmanned aerial vehicles (UAVs) or unmanned aircraft. The researchers’ reports on the various types of UAVs and their applications to early detection of agricultural diseases are rigorously assessed and compared. This paper also discusses the deployment of aerial, satellite, and other remote sensing technologies for disease detection, as well as their Quality of Service (QoS).