Explore the vast range of titles available.

It has been widely accepted that magmas genetically linked to porphyry (-skarn) Cu (Mo) deposits are commonly oxidized. Recently, using laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) techniques, zircon Ce4+/Ce3+, CeN/CeN*, EuN/EuN*, and Ce/Nd ratios, and magma ΔFMQ values (departure from the fayalite–magnetite–quartz oxygen buffer) based on zircon trace element compositions, have been used as proxies to quantify magma oxidation state. Here we present the zircon trace element compositions of 13 Mesozoic porphyry (-skarn) Mo deposits in NE China of various sizes to examine the relationship between magma Mo fertility and magma oxidation state. Generally, the studied deposits with > 0.3 Mt Mo have Ce4+/Ce3+ > 100, CeN/CeN* > 100, Ce/Nd > 10, and EuN/EuN* > 0.3, whereas those containing < 0.3 Mt Mo have Ce4+/Ce3+ < 100, CeN/CeN* < 100, Ce/Nd < 10, and EuN/EuN* < 0.3. The calculated magma ΔFMQ values do not show significant correlation with metal tonnage, probably due to the large uncertainties of the estimated ΔFMQ data. Among these proxies, Ce4+/Ce3+ and CeN/CeN* ratios show the strongest correlation with Mo tonnage, followed by Ce/Nd and EuN/EuN*. The above results confirm the previous proposal that zircon Ce and Eu anomalies can represent an intrusion’s oxidation state and indicate that the Mo endowment of magmatic-hydrothermal deposits is positively correlated with the magma oxidation state. Compared with Mo-bearing intrusions, the trends for Cu-bearing intrusions are similar but are more complicated, especially for those deposits with > 10 Mt Cu. The findings in this study can be used to evaluate an intrusion’s potential to produce Mo mineralization.

The Huashandong W deposit (7.7 Mt @ 0.26% WO3) is a newly discovered Neoproterozoic scheelite-dominated deposit in the world-class Jiangnan tungsten belt, South China. It occurs largely in metasedimentary rocks near the western margin of the Neoproterozoic Jiuling batholith and mainly consists of W-bearing exogreisen, hydrothermal breccias, and quartz veins. Two episodes of Neoproterozoic granite magmatism are identified with zircon U-Pb ages of ca. 830–823 and 807–804 Ma, respectively. According to cross-cutting relationships and mineral assemblages, two periods of hydrothermal alteration and W mineralization, corresponding to the two episodes of granite magmatism, are recognized in the Huashandong deposit. The early period is dominated by greisenization and associated scheelite mineralization whereas the late period is characterized by sericitization, hydrothermal brecciation, quartz veining, and associated scheelite and minor wolframite mineralization. Molybdenite Re-Os dating indicates that the early- and late-period W mineralization took place at ca. 828 and 800 Ma, respectively. Zircon trace element characteristics suggest that the Jiuling granite crystallized from reduced granitic magmas and has the potential for W mineralization. The petrologic and geochemical features of the Jiuling granite, coupled with the zircon U-Pb ages and Hf isotopic signatures and molybdenite Re-Os ages, imply that the Huashandong W deposit is genetically related to two phases of evolved granodiorites in the Jiuling batholith. The magmatic-hydrothermal nature of both metallogenic events is confirmed by H-O isotopes on hydrothermal quartz.

Trace element compositional trends in zircons separated from single hand samples have been used to infer dynamic processes in magma reservoirs. Here, we compile published zircon trace element chemistry to quantify any systematic difference between the range of compositions observed in zircon from individual volcanic and plutonic hand samples and compare these results with geochemical modeling to derive implications for magma reservoir dynamics. We find that both rock types span a wide range of hand‐sample scale variability (i.e., wide range of coefficients of variation), but there is no systematic difference in the average variability between plutonic and volcanic samples (i.e., no difference in the mean coefficient of variation). This indicates that dynamic processes related to eruption are not necessarily required as a fundamental process to create hand sample‐scale compositional heterogeneity beyond what is present due to dynamic processes in the reservoir recorded in plutonic samples. Modeling of felsic systems (>68.5 wt.% SiO2) indicates that the similar average variability in felsic volcanic and plutonic hand samples cannot be reproduced by closed‐system crystallization of compositionally distinct melts locally within a magma reservoir (i.e., isolated melt pockets in a crystal mush) but requires mixing of at least two felsic melt compositions at a small spatial scale. This study provides a framework for focused studies on individual volcanic‐plutonic systems exploring how plutonic and volcanic zircon compositional variability records the time and length scales of magma reservoir processes. Plain Language Summary Studies of volcanic rocks (erupted magmas) and plutonic rocks (unerupted magmas) provide insights into dynamic processes operating in magma reservoirs (e.g., mixing, crystal‐melt separation, etc.). However, contemporaneous volcanic and plutonic rocks of the same magmatic system are rarely exposed together, thus conceptual models of magma reservoir dynamics are seldom integrated directly between volcanic and plutonic studies. Zircon is a common mineral in crustal magmas (volcanic and plutonic) and is capable of recording melt evolution via its trace element chemistry. This study aims to gain insights into magma reservoir dynamics by systematically comparing trace element compositional variability of zircon separated from individual volcanic and plutonic hand samples. Our study shows that there is no systematic difference in the average compositional variability between plutonic and volcanic hand samples. This indicates that processes leading to eruptions do not necessarily introduce compositional heterogeneity beyond what is present due to dynamic processes in the reservoir recorded in plutonic samples. We further show using geochemical modeling that the observed similar average variability of zircon in felsic volcanic and plutonic hand samples cannot be reproduced by closed‐system crystallization (i.e., isolated melt pockets in a crystal mush) but requires mixing of at least two felsic melts (i.e., open‐system behavior). Key Points Zircon trace element chemistry from volcanic and plutonic hand samples does not show a difference in their average compositional variability Similar variability suggests that processes leading to eruption do not introduce systematically more heterogeneity than present in unerupted parts of the reservoir Crystallization modeling requires open‐system behavior at a scale of decimeters to reproduce the average variability in both volcanic and plutonic hand samples

A silicic ignimbrite flare-up episode occurred in the Pannonian Basin during the Miocene, coeval with the syn-extensional period in the region. It produced important correlation horizons in the regional stratigraphy; however, they lacked precise and accurate geochronology. Here, we used U–Pb (LA-ICP-MS and ID-TIMS) and (U–Th)/He dating of zircons to determine the eruption ages of the youngest stage of this volcanic activity and constrain the longevity of the magma storage in crustal reservoirs. Reliability of the U–Pb data is supported by (U–Th)/He zircon dating and magnetostratigraphic constraints. We distinguish four eruptive phases from 15.9 ± 0.3 to 14.1 ± 0.3 Ma, each of which possibly includes multiple eruptive events. Among these, at least two large volume eruptions (>10 km 3 ) occurred at 14.8 ± 0.3 Ma (Demjén ignimbrite) and 14.1 ± 0.3 Ma (Harsány ignimbrite). The in situ U–Pb zircon dating shows wide age ranges (up to 700 kyr) in most of the crystal-poor pyroclastic units, containing few to no xenocrysts, which implies efficient recycling of antecrysts. We propose that long-lived silicic magma reservoirs, mostly kept as high-crystallinity mushes, have existed in the Pannonian Basin during the 16–14 Ma period. Small but significant differences in zircon, bulk rock and glass shard composition among units suggest the presence of spatially separated reservoirs, sometimes existing contemporaneously. Our results also better constrain the time frame of the main tectonic events that occurred in the Northern Pannonian Basin: We refined the upper temporal boundary (15 Ma) of the youngest counterclockwise block rotation and the beginning of a new deformation phase, which structurally characterized the onset of the youngest volcanic and sedimentary phase.

Temporal constraints on the closure of the eastern segment of the Palaeo-Asian Ocean along the northern margin of the North China Craton (NCC) remain unclear. As a part of the NCC, the sedimentation and tectonic evolution of the Late Palaeozoic Ordos Basin were closely related to the opening and closing of the Palaeo-Asian Ocean. We use petrology, quantitative mineralogical analysis, U–Pb geochronology and trace element signatures of detrital zircons of the Lower Shihezi Formation from two sections in the eastern north Ordos Basin and two sections in the western north Ordos Basin to reconstruct the sedimentary provenance and tectonic background of the northern Ordos Basin. The results show that the sediments of the western sections were mainly derived from the Yinshan orogenic belt and Alxa block, and that those in the eastern sections only came from the Yinshan orogenic belt. The trace element ratios in detrital zircons from the Late Palaeozoic sandstones indicate that the source areas were mainly subduction-related continental arcs, closely related to the continued subduction of the Palaeo-Asian Ocean in the Late Palaeozoic. Since the main Late Palaeozoic magmatic periods vary on the east and west sides of the northern margin of the Ordos Basin, two main collisions related to Palaeo-Asian Ocean closure are recorded. The collision on the west side occurred significantly earlier than that in the east. This study implies that the Palaeo-Asian Ocean began to subduct beneath the NCC in the Carboniferous and gradually closed from west to east thereafter.

The study presents a complex characteristic of zircon from the Verkhneurmiysky intrusive series with Li-F granites. A wide range of morphological and chemical properties of zircon allowed us to obtain new information on the formation and alteration of zircon from biotite and zinnwaldite granitoids and to determine its features, which contribute to the correct definition of Li-F granites formed directly before the tin mineralization. The reviled trends of zircon morphology and composition evolution in the Verkhneurmiysky granites series are: the high-temperature morphotypes are followed by low-temperature ones with more complicated internal structure with secondary alteration zones, mineral inclusions, pores, and cracks; the increasing concentration of volatile (H2O, F), large ion lithophile (Cs, Sr), high field strength (Hf, Nb) and rare-earth elements with decreasing crystallization temperatures and the determining role of the fluid phase (predominantly, F) in the trace element accumulation. The composition of zircon cores in biotite and zinnwaldite granites is very similar. However, the zircon rims from zinnwaldite granites are much more enriched in trace elements compared to those from biotite granites. The first study of zircon from the Verkhneurmiysky granitoids provides new data on the formation and alteration conditions of granitoids, including zinnwaldite ones.

Amidst the rapid advancement of artificial intelligence and information technology, the emergence of big data and machine learning provides a new research paradigm for mineral exploration. Focusing on the Tethyan metallogenic domain, this paper conducted a series of research works based on machine learning methods to explore the critical geochemical element signals that affect the metallogenic potential of porphyry deposits and reveal the metallogenic regularity. Binary classifiers based on random forest, XGBoost, and deep neural network are established to distinguish zircon fertility, and these machine learning methods achieve higher accuracy, exceeding 90%, compared with the traditional geochemical methods. Based on the random forest and SHapley Additive exPlanations (SHAP) algorithms, key chemical element characteristics conducive to magmatic mineralization are revealed. In addition, a deposit classification model was constructed, and the t-SNE method was used to visualize the differences in zircon trace element characteristics between porphyry deposits of different mineralization types. The study highlights the promise of machine learning algorithms in metallogenic potential assessment and mineral exploration by comparing them with traditional chemical methods, providing insights into future mineral classification models utilizing sub-mineral geochemical data.

In the Three Gorges and adjacent areas, there are three planation surfaces and five terraces along the Yangtze River that record the evolution history of the river system. Here, we used diagnostic heavy minerals, U-Pb geochronology, and trace elements of detrital zircons from one planation surface, two terraces, and a modern point bar to reconstruct the evolution history of the upper Yangtze River, specifically the Chuan River in the Sichuan Basin. The sediments in the lowest planation surface had different felsic source rocks derived from east of the Three Gorges, which indicated that before the disintegration of the lowest planation surface (0.75 Ma), there were two paleorivers: the westward-flowing paleo-Chuan River and eastward-flowing paleo-Yangtze River separated by the Huangling Dome. At 0.75–0.73 Ma, the dominant detrital zircons from the Sichuan Basin in the sediments of terrace T5 (the highest terrace) confirmed that the paleo-Yangtze River cut through the Three Gorges and captured the paleo-Chuan River, and the Daliang Mountains became the new drainage divide. Finally, the appearance of materials from the upper Jinsha River in terrace T2 indicated that the paleo-Yangtze River progressively captured the paleo-Jinsha River, and the modern upper Yangtze River formed before 0.05 Ma. These river capture events of the upper Yangtze River confirmed the Quaternary uplift of the SE Tibetan Plateau.

The Aolunhua Mo deposit is a typical porphyry deposit, which is located in the middle southern section of the Da Hinggan Range metallogenic belt. Here, we report LA-ICP-MS zircon U-Pb age data from the Mo-associated granitoid, together with the element geochemistry of the zircons, discussing the source material of the ore-forming rock of the deposit. The zircon data constrain the crystallization age of the granite porphyry as 135.0 ± 1.0 Ma, correlating it with the widespread Yanshanian intermediate–felsic magmatic activity. The Th/U ratio of the zircon is greater than 0.1, with a significant positive Ce anomaly (Ce* = 1.72–188.71) and a negative Eu anomaly (Eu* = 0.05–0.57). The zircons show depleted LREE and enriched HREE patterns, as well as low La and Pr contents, suggesting crystallization from crust-derived magmas. Based on the geology of the ore deposit and the age data, in combination with the regional geodynamic evolution, we infer that the Aolunhua Mo deposit was formed near the peak stage of Sn poly-metallic metallogenesis in the Da Hinggan Range region at around 140 Ma, associated with a tectonic setting, characterized by the transition from compression to extension. Based on a comparison with the newly found Mo deposits along the banks of the Xilamulun River, we propose that the Tianshan–Linxi is an important Mo-metallogenic belt. It also suggests an increased likelihood for the occurrence of Mo along the north bank of the Xilamulun River.

Magmatic zircon tends to present characteristic trends in trace element compositions in response to magma petrogenesis and metallogenesis, such that zircon may provide a window into melt evolution not accessible by whole rock chemistry. The Yangla large Cu deposit is located in the central part of the Jinshajiang Suture Zone, southwest China, constrained between the Jinshajiang and Yangla Faults. In this study, the trace elements and hafnium isotopic compositions of zircons from quartz diorite were studied. Previous published relevant data of Yangla granitoid plutons (i.e., dioritic enclave, granodiorite, and quartz monzonite porphyry) also have been systematically cited and discussed. The result shows that the crystallization temperature and two-stage Hf mode ages (tCDM; the age of the source rocks for the magmas) gradually increased while the oxygen fugacity (fO2) and εHf(t) values gradually decreased, corresponding to the diorite enclave (~232 Ma), through granodiorite (~208 Ma) and quartz monzonite porphyry (~202 Ma), and to quartz diorite (~195 Ma). It is suggested that four plutons were from the same three-component mixing of upper crust + lower crust + mantle magmas, while the upper crustal metasediments ratios were gradually increased from the early to late stage. The increasing upper crust inputs resulted in higher melting temperatures and compositions of the initial magma. All melts experienced distinct fractional crystallization of apatite, titanite, and amphibole, and the later granite melts experienced higher assimilation and fractional crystallization degrees than the early ones in the evolution processes four stages of intrusive rocks. These Yangla granitoids are the products of large-scale acid magmatic emplacement activities in the Triassic-early Jurassic and have a good metallogenic potential of the Cu-W polymetallic deposit.