Journal Article

Design and Non-Uniform Current Analysis of a 0.35-THz Extended Interaction Oscillator Based on Pseudospark-Sourced Multiple Sheet Electron Beams

Xu, Xiaotao, Yin, Yong, Meng, Lin, Li, Hailong, Bi, Liangjie, Peng, Ruibin, Qin, Yu, Wang, Bin

2023

Overview

A novel method, which combines a multiple-beam extended interaction oscillator (EIO) with pseudospark-sourced (PS) sheet electron beams, is applied to generate high-power terahertz sources. For a multiple-beam EIO, the beam cross-section is significantly improved by replacing the commonly used pencil electron beams with sheet electron beams. The PS electron beams have the advantage of high current density and operate without a focus magnetic field. The volume of the cavity is larger when the EIO operates in the TM31-3π mode than in the conventional TM01-2π mode at the same operating frequency. The EIO operating at the terahertz frequency has a larger cavity volume, which means greater power capacity and lower manufacturing difficulty. For a PS multiple-beam EIO, the non-uniformity of electron beam currents is a common problem. In order to study this problem, an original high-order mode EIO driven by PS multiple sheet electron beams is presented with enhanced output power at 0.35 THz. The authors analyze electron beams with different currents through particle-in-cell (PIC) simulations. Simulation results show that the EIO can operate stably even in the case of non-uniform PS electron beam currents. When each current is 1.4 A, simulation results show the EIO’s output power of 4.9 kW at 0.35 THz. Considering the low conductivity of 1.1 × 107 S/m, the efficiency is still 1.42%.

• Publisher: MDPI AG
• Subject: Beam currents / Design / Design and construction / Efficiency / Electron beams / Electrons / Gases / Low conductivity / Nonuniformity / Oscillators / Oscillators (Electronics) / Particle beams / Plasma / Power / Radiation / Simulation / Terahertz frequencies / Terahertz radiation