Journal Article

Optimisation of Mechanical Properties in Saw-Dust/Woven-Jute Fibre/Polyester Structural Composites under Liquid Nitrogen Environment Using Response Surface Methodology

Ganesan, Velmurugan, Krishnamoorthy, Yoganandam, Shanmugam, Suresh Kumar, Alagumalai, Vasudevan, Sanjeevi, Sekar, Kaliyamoorthy, Babu, Javad Razavi, Seyed Mohammad, Försth, Michael, Sas, Gabriel, Das, Oisik, Shanmugam, Vigneshwaran

2021

Overview

Natural fibre-based composites are replacing traditional materials in a wide range of structural applications that are used in different environments. Natural fibres suffer from thermal shocks, which affects the use of these composites in cold environment. Considering these, a goal was set in the present research to investigate the impact of cryogenic conditions on natural fibre composites. Composites were developed using polyester as matrix and jute-fibre and waste Teak saw-dust as reinforcement and filler, respectively. The effects of six parameters, viz., density of saw-dust, weight ratio of saw-dust, grade of woven-jute, number of jute layers, duration of cryogenic treatment of composite and duration of alkaline treatment of fibres on the mechanical properties of the composite was evaluated with an objective to maximise hardness, tensile, impact and flexural strengths. Taguchi method was used to design the experiments and response-surface methodology was used to model, predict and plot interactive surface plots. Results indicated that the duration of cryogenic treatment had a significant effect on mechanical properties, which was better only up to 60 min. The models were found to be statistically significant. The study concluded that saw-dust of density 300 kg/m3 used as a filler with a weight ratio of 13 wt.% and a reinforcement of a single layer of woven-jute-fibre mat of grade 250 gsm subjected to alkaline treatment for 4 h in a composite that has undergone 45 min of cryogenic treatment presented an improvement of 64% in impact strength, ca. 21% in flexural strength, ca. 158% in tensile strength and ca. 28% in hardness.

• Publisher: MDPI AG,MDPI
• Subject: Byggkonstruktion / Cold / Composite materials / Cryogenic treatment / Density / Dust / Fiber composites / Filler materials / Fillers / Flexural strength / Hardness / Impact strength / Investigations / Jute / Liquid nitrogen / Mechanical properties / Optimization / Response surface methodology / Shear strength / structural composites / Structural Engineering / Taguchi / Taguchi methods / Tensile strength / Weight