Explore the vast range of titles available.

In this work, magneto-hydrodynamic natural convection of a nanofluid in a wavy cavity considering Brownian motion is studied numerically using the control volume finite element method. The effective viscosity and thermal conductivity of the nanofluid are defined by the correlation in which the impact of Brownian motion on the thermal conductivity is considered. The considered wavy cavity is heated from the left side and it cooled from the right side. Also, the top and bottom walls of the considered wavy cavity are assumed adiabatic. The impacts of various controlling parameters such as the Rayleigh number, wavy contraction ratio, Hartmann number and undulation number are examined on the contour maps of the streamlines and the isotherms. Further, the average and local Nusselt numbers are calculated and presented graphically and discussed. The findings narrate that the strength of the convective flow has a direct relationship with the Rayleigh number and also it has a reverse relationship with the wavy contraction ratio.

This study provides numerical analysis of the free convection of copper–water-based nanofluid filling a triangular cavity with semicircular bottom wall. The cavity sidewalls are maintained at cold temperature, while the semicircular wall is maintained at hot temperature. The other wall segments are thermally insulated. To control the energy transport within the cavity, a uniform magnetic field is applied horizontally. The physical domain is discretized according to the control volume finite element method which has been used to solve the governing equations. The physical and geometrical aspects of the current problem are investigated by inspecting the impacts of Rayleigh number, Hartman number, aspect ratio and the volume fraction of the Cu nanoparticles. Decreasing the radius of the hot semicircle enlarges the average Nusselt number at the absence of the magnetic field. When the magnetic field is applied, this effect is conversed within Ra  ≤ 10 4 . This conversed impact does not hold up when Ra is raised to 10 5 . The numerical results are correlated in a sophisticated correlation of the average Nusselt number with other parameters.

Natural convection heat transfer of copper–water nanofluid in a porous gap between hot internal rectangular cylinder and cold external circular cylinder under the effect of inclined uniform magnetic field has been investigated. Domain of interest is a porous sector, where horizontal and vertical adiabatic borders are the external circular cylinder radii. Governing equations formulated in dimensionless stream function, vorticity and temperature variables using the Brinkman-extended Darcy model for the porous medium, single-phase nanofluid model with Brinkman correlation for the nanofluid viscosity and Hamilton and Crosser model for the nanofluid thermal conductivity have been solved numerically by the control volume finite element method. Effects of the Rayleigh number, Hartmann number, Darcy number, magnetic field inclination angle, nanoparticles volume fraction, nanoparticles shape factor, nanoparticles material, nanofluid thermal conductivity and dynamic viscosity models and nanofluid electrical conductivity correlation on streamlines, isotherms, local and average Nusselt numbers have been studied. Obtained results have shown the heat transfer enhancement with the Rayleigh number, Darcy number, nanoparticles volume fraction and nanoparticles shape factor, while the heat transfer rate reduces with the Hartmann number and magnetic field inclination angle. At the same time, the average Nusselt number increases at about 16% when nanoparticles volume fraction rises from 0 till 4% for Ra  = 10 5 , Ha  = 25, while for Ha  = 0 one can find the heat transfer rate augmentation at about 9% for the same conditions. In the case of different nanofluid thermal conductivity and dynamic viscosity models, it has been found that KKL model reflects the heat transfer rate reduction with nanoparticles volume fraction, while for the Hamilton–Crosser–Brinkman model, the heat transfer rate increases. Comparison between the Maxwell correlation for the nanofluid electrical conductivity and the base fluid electrical conductivity illustrates an intensification of the convective heat transfer rate for high values of the Rayleigh number ( Ra  ≥ 10 4 ) in the case of Maxwell correlation for the nanofluid electrical conductivity. At the same time, the effect of the nanoparticles volume fraction becomes more significant when nanofluid electrical conductivity is a function of nanoparticles volume fraction.

One of the important problems in the field of heat transfer is the investigation of natural convection heat transfer in the cavities. The next step is study of entropy generation. The object of the present work is investigation of the entropy generation in a semi-annulus cavity filled with Cu–water nanofluid. The outer and inner semicircular walls are kept at constant temperatures, whereas the two other walls are insulated. Firstly, the governing equations (i.e., continuity, momentum and energy equations) are numerically solved by the control volume-based finite element method, and then, the entropy generation number is calculated. The effects of the Rayleigh number, the nanoparticle volume fraction, the particle shape and the angle of turn for the enclosure on the entropy generation number are investigated. Also, a new criterion for the evaluation of cavity thermal performance is defined that is called ECOP. The results were compared with those of the literature, and good agreement was observed. The results show that the Nusselt number and entropy generation number increase as the Rayleigh number and the nanoparticle volume fraction increase.

Purpose Natural convection heat transfer analysis can be completed using entropy generation analysis. This study aims to accomplish both the natural convection heat transfer and entropy generation analyses for a hexagonal cavity loaded with Cu-H2O nanoliquid subjected to an oriented magnetic field. Design/methodology/approach Control volume-based finite element method is applied to solve the non-dimensional forms of governing equations and then, the entropy generation number is computed. Findings The results portray that both the average Nusselt and entropy generation numbers boost with increasing aspect ratio for each value of the undulation number, while both of them decrease with increasing the undulation number for each amplitude parameter. There is a maximum value for the entropy generation number at a specified value of Hartmann number. Also, there is a minimum value for the entropy generation number at a specified value of angle of the magnetic field. When the volume fraction of nanoparticles grows, the average Nusselt number increases and the entropy generation number declines. The entropy generation number attains to a maximum value at Ha = 14 for each value of aspect ratio. The average Nusselt number ascends 2.9 per cent and entropy generation number decreases 1.3 per cent for Ha = 0 when ϕ increases from 0 to 4 per cent. Originality/value A hexagonal enclosure (complex geometry), which has many industrial applications, is chosen in this study. Not only the characteristics of heat transfer are investigated but also entropy generation analysis is performed in this study. The ecological coefficient of performance for enclosures is calculated, too.

PurposeThe purpose of this paper is to investigate micropolar magnetohydrodynamics (MHD) fluid flow passing over a vertical plate. Three different base fluids have been used that include water, ethylene glycol and ethylene glycol/water (50%–50%). Also, a nanoparticle was used in all of the base fluids. The effects of natural convection heat transfer and magnetic field have been taken into account.Design/methodology/approachThe main purpose of solving the governing equations is to scrutinize the effects of the magnetic parameter, the nanoparticle volume fraction, micropolar parameter and nanoparticles shape factor on velocity, temperature and microrotation profiles, the skin friction coefficient and the Nusselt number. These surveys have been considered for three base fluids simultaneously.FindingsThe results indicate that for water-based fluids, the temperature profile of lamina-shaped nanoparticles is 38.09% higher than brick-shaped nanoparticles.Originality/valueThis paper provides micropolar MHD fluid flow analysis considering natural convection heat transfer and magnetic field in three different base fluids. The aim of assessments is the diagnosis of some parameter effects, such as magnetic parameter and nanoparticle volume fraction, on velocity, temperature and microrotation profiles and components. Also, the use of mixed base fluids presented as a novelty in this paper.

Purpose The purpose of this paper is to investigate natural convection in a porous wavy-walled enclosure that is including a cylinder cavity in the middle of it and filled with a hybrid nanofluid contains 1-Butanol as the base fluid and MoS2–Fe3O4 hybrid nanoparticles. Design/methodology/approach The domain of interest is bounded by constant temperature horizontal corrugated surfaces and isothermal vertical flat surfaces. The numerical outputs are explained in the type of isotherms, streamline and average Nusselt number with variations of the Rayleigh number, Hartmann number, nanoparticle shape factor and porosity of the porous medium. For solving the governing equations, the finite element method has been used. Findings The results show that Nuave is proportional to Rayleigh and nanoparticle shape factor directly as well as it has an inverse relation with Hartmann and porosity. The obtained results reveal that the shape factor parameter has a significant effect on the heat transfer performance, which shows a 55.44% contribution on the average Nusselt number. Originality/value As a novelty, to maximize the heat transfer performance in a corrugated walls enclosure, the optimal parameters have intended by using the response surface and Taguchi methods. Additionally, an accurate correlation for the average Nusselt number is developed with sensibly great precision.

Purpose The purpose of this study is to peruse natural convection in a CuO-water nanofluid-filled complex-shaped enclosure under the influence of a uniform magnetic field by using control volume finite element method. Design/methodology/approach Governing equations formulated in dimensionless stream function, vorticity and temperature variables using the single-phase nanofluid model with the Koo–Kleinstreuer–Li correlation for the effective dynamic viscosity and the effective thermal conductivity have been solved numerically by control volume finite element method. Findings Effects of various pertinent parameters such as Rayleigh number, Hartmann number, volume fraction of nanofluid and shape factor of nanoparticle on the convective heat transfer characteristics are analysed. It was observed that local and average heat transfer rates increase for higher value of Rayleigh number and lower value of Hartmann number. Among various nanoparticle shapes, platelets were found to be best in terms of heat transfer performance. The amount of average Nusselt number reductions was found to be different when nanofluids with different solid particle volume fractions were considered due to thermal and electrical conductivity enhancement of fluid with nanoparticle addition. Originality/value A comprehensive study of the natural convection in a CuO-water nanofluid-filled complex-shaped enclosure under the influence of a uniform magnetic field by using control volume finite element method is addressed.

In this study, the natural convection of a magnetohydrodynamic nanofluid in an enclosure under the effects of thermal radiation and the shape factor of nanoparticles was analyzed numerically using the control-volume-based finite element method (CVFEM). Columns, spheres, and lamina are examples of the nanoparticle shapes used in the investigation. The study of nanofluid flow and heat transfer was accomplished with an extensive range of nanofluid volume fractions, radiation parameters, Hartmann numbers, Rayleigh numbers, and nanoparticle shape factors. Also, the correlation between the average Nusselt number and the influencing parameters of the current study was determined. The findings demonstrate that laminar nanoparticles have a more notable impact on the average and local Nusselt numbers than the other nanoparticle shapes.

Purpose The purpose of the study is to indicate a three-dimensional convective heat transfer properties evaluation of magnetohydrodynamics nanofluid flow, comprising motile oxytactic microorganisms and nanoparticles, passing through a rotating cone. Design/methodology/approach The imposed technique for solving the governing equations is the Runge–Kutta fifth-order method. The main point of this survey is to diagnosis the influence of diverse factors on velocity, temperature distributions and concentration profile. Furthermore, appending the magnetic field, thermal radiation and viscous dissipation in calculations; also, simultaneous involvement of heat absorption and excretion has been represented as novelties. Findings The results elucidate that by changing the Peclet number from 1 to 2, the dimensionless concentration of the microorganisms has been diminished by about 34.37%. In addition, variation of the magnetic parameter from 0 to 1 has been resulted in reducing the temperature distribution by about 3.11%. Originality/value Recently, attention has been absorbed to adding the motile microorganisms to nanofluid for enhancement of heat transfer and avoiding aggregation of particles. In this regard, the hydrothermal flow of microorganisms has been investigated in this study.