Explore the vast range of titles available.

The cross-compliance mechanism of the European Union (EU)'s common agricultural policy (CAP) makes the approval of the direct payments to the European farmers subject to compliance with the requirement to maintain the land in good agricultural and environmental condition. One of the obligations of the Romanian land owners and farmers is to avoid the installation of unwanted vegetation on their land plots. This vegetation is represented by some species of herbaceous or woody plants, annual or perennial, that spontaneously invade the agricultural lands, diminishing the production capacity of the cultivated plants. Included in this category are 10 meadow weeds, without fodder value or even toxic to animals: L., s L., L., L., L., (L.) Kuhn, L., L., L., and L. Various and multiple uses in traditional medicine of these meadow weed species have been reported for Romania and other nine neighboring East European countries, Bosnia and Herzegovina, Bulgaria, Czech Republic, Estonia, Kosovo, Russia, Turkey, Serbia, and Ukraine. For were recorded the highest number of ethnomedicinal uses, in the largest number of East European countries, including Romania. and are not recommended for human consumption but can be further investigated as potential sources of pharmaceutically active compounds. Once removed by landowners and farmers from their land, the raw plant material of these 10 species become readily and easily available to the Romanian local communities and the industry of herbal food supplements, while the biodiversity of the agro-ecosystems is maintained.

This study evaluates the antimicrobial and antioxidant activities of five essential oils (EO): pine oil, thyme oil, sage oil, fennel oil, and eucalyptus essential oils. To identify the chemical composition of the essential oils, we used gas chromatography coupled to a mass spectrometer (GC-MS). EO are predominantly characterized by the presence of monoterpene hydrocarbons and oxygenated monoterpenes, except in the case of fennel essential oil which contains phenylpropanoids as its main components. The antimicrobial activity of the EO was highlighted on four standard microbial strains (two Gram-negative strains-Escherichia coli ATCC 25922 and Pseudomonas aeruginosa ATCC 27853; one Gram-positive strain Staphylococcus aureus ATCC 25923, and one yeast strain-Candida albicans ATCC 10231). Antimicrobial activity was assessed by measuring the diameter of the inhibition zone, and by determining the values of the minimum inhibitory concentration (MIC) and minimum concentration of biofilm eradication (MCBE). Analyzing the diameter values of the inhibition zones we observed increased efficiency of thyme essential oil, which showed the highest values for all tested microbial species. The results of tests performed in a liquid confirm the high sensitivity of the standard strain Escherichia coli ATCC 25922 to the action of all essential oils, the lowest values of MIC being recorded for sage and thyme essential oils. For the most essential oils tested in this study, the MCBE values are close to the MIC values, except for the pine EO which seems to have stimulated the adhesion of the yeast strain at concentrations lower than 5%. The study highlights the antimicrobial activity of the tested essential oils on Gram-positive and Gram-negative strains.

Gold nanostructures (AuNP) are important as strong platforms for targeted therapeutic and diagnostic applications. Tireless effort has been devoted nowadays to explore the multifunctionality of AuNP in multicomponent biostructures. Herein, we report the fabrication of horseradish peroxidase enzyme (HRP)-AuNP/ZnAlLDH heterostructure by the facile synthesis of AuNP on the biocompatible matrices of layered double hydroxides (LDH) followed by the immobilization of the enzyme on AuNP/LDH assemblies. During this process, ZnAlLDH have a dual function of exploring its structural “memory effect” for the synthesis of nanogold and acting as a support for the enzyme immobilization. X-ray diffraction (XRD), UV-Vis spectrometry, transmission electronic microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), and infrared (FTIR) spectroscopy have been used to characterize the structural, chemical composition, optical, and morphology of the novel materials. We present here the release of AuNP from HRP-AuNP/ZnAlLDH by using as controlled variables HRP:LDHs ratio and the pH of the solution. Results show that AuNP established close interactions with HRP and formed an HRP-AuNP bioconjugate. Results reveal that HRP suffers a significant loss of the activity in the presence of nanoparticles of gold, such that, AuNP act to inhibit the activity of the enzyme. AuNP behavior in enzyme-bio-heterostructures should be inspiring for future applications of AuNP in nanomedicine.

Engineering complex nanocomposites that specifically target the hepatitis B virus （HBV） and overcome the limitations of current therapies such as limited efficacy and serious side effects is very challenging. Here, for the first time, the antiviral effect of engineered plasmonic gold and layered double hydroxide self-assemblies （AuNPs/LDHs） is demonstrated, using HBV as a model virus and hepatoma-derived HepG2.2.215 ceils for viral replication, assembly, and secretion of infectious virions and subviral particles. AuNPs/LDHs were obtained by a simple, cost-effective procedure in which small AuNPs （-3.5 nm） were directly obtained and organized on the surface of larger LDH nanoparticles （-150 nm） by exploiting the capability of MgLDH, ZnLDH, and MgFeLDH to manifest their ＂structural memory＂ in the aqueous solution of Au（O2CCH3）3. The self-assembly approach of AuNPs and LDHs was assessed by transmission electron microscopy （TEM）, X-ray photoelectron spectroscopy （XPS）, powder X-ray diffraction （PXRD）, and UV-Vis analysis （UV-Vis）. All AuNPs/LDHs tested reduced the amount of viral and subviral particles released from treated cells by up to 80% and exhibited good cytocompatibility. AuNPs/MgFeLDH showed the highest antiviral HBV response with more than 90% inhibition of HBV secretion for the whole concentration range. Preliminary studies on the mechanism of HBV inhibition reveals that in the presence of AuNPs/LDHs, HBV particles are sequestered within the treated cells. The antiviral and low cytotoxic plasmonic properties of these Au/LDH nanocomposites indicate that they hold significant potential to be tailored as novel efficient therapeutics for the treatment of hepatitis B.

The main problems directly linked with the use of PMMA bone cements in orthopedic surgery are the improper mechanical bond between cement and bone and the absence of antimicrobial properties. Recently, more research has been devoted to new bone cement with antimicrobial properties using mainly antibiotics or other innovative materials with antimicrobial properties. In this paper, we developed modified PMMA bone cement with antimicrobial properties proposing some experimental antimicrobial agents consisting of silver nanoparticles incorporated in ceramic glass and hydroxyapatite impregnated with peppermint oil. The impact of the addition of antimicrobial agents on the structure, mechanical properties, and biocompatibility of new PMMA bone cements was quantified. It has been shown that the addition of antimicrobial agents improves the flexural strength of the traditional PMMA bone cement, while the yield strength values show a decrease, most likely because this agent acts as a discontinuity inside the material rather than as a reinforcing agent. In the case of all samples, the addition of antimicrobial agents had no significant influence on the thermal stability. The new PMMA bone cement showed good biocompatibility and the possibility of osteoblast proliferation (MTT test) along with a low level of cytotoxicity (LDH test).

Interoperability between research management systems, especially digital libraries or repositories, has been a central theme in the community for the past years, with the discussion focused on means of enriching, linking, and disseminating outputs. This paper considers a frequently overlooked aspect, namely the migration of records across systems, by introducing the Stateful Library Analysis and Migration system (SLAM) and presenting practical experiences with migrating records from DSpace and Digital Commons repositories to Figshare.

Hemorrhage is a detrimental event present in traumatic injury, surgery, and disorders of bleeding that can become life-threatening if not properly managed. Moreover, uncontrolled bleeding can complicate surgical interventions, altering the outcome of surgical procedures. Therefore, to reduce the risk of complications and decrease the risk of morbidity and mortality associated with hemorrhage, it is necessary to use an effective hemostatic agent that ensures the immediate control of bleeding. In recent years, there have been increasingly rapid advances in developing a novel generation of biomaterials with hemostatic properties. Nowadays, a wide array of topical hemostatic agents is available, including chitosan-based biomaterials that have shown outstanding properties such as antibacterial, antifungal, hemostatic, and analgesic activity in addition to their biocompatibility, biodegradability, and wound-healing effects. This review provides an analysis of chitosan-based hemostatic biomaterials and discusses the progress made in their performance, mechanism of action, efficacy, cost, and safety in recent years.

Magnesium alloys as bioresorbable materials with good biocompatibility have raised a growing interest in the past years in temporary implant manufacturing, as they offer a steady resorption rate and optimal healing in the body. Magnesium exhibits tensile strength properties similar to those of natural bone, which determines its application in load-bearing mechanical medical devices. In this paper, we investigated the biodegradation rate of Mg-Zn-Mn biodegradable alloys (ZMX410 and ZM21) before and after coating them with hydroxyapatite (HAP) via the electrophoretic deposition method. The experimental samples were subjected to corrosion tests to observe the effect of HAP deposition on corrosion resistance and, implicitly, the rate of biodegradation of these in simulated environments. X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS) provided detailed information on the quality, structure, and morphology of the HAP coating. The obtained results demonstrate that coating of Mg-Zn-Mn alloys by HAP led to the improvement of corrosion resistance in simulated environments, and that the HAP coating could be used in order to control the biodegradation rate.

Ventilator-associated pneumonia is one of the most frequently encountered hospital infections and is an essential issue in the healthcare field. It is usually linked to a high mortality rate and prolonged hospitalization time. There is a lack of treatment, so alternative solutions must be continuously sought. The endotracheal tube is an indwelling device that is a significant culprit for ventilator-associated pneumonia because its surface can be colonized by different types of pathogens, which generate a multispecies biofilm. In the paper, we discuss the definition of ventilator-associated pneumonia, the economic burdens, and its outcomes. Then, we present the latest technological solutions for endotracheal tube surfaces, such as active antimicrobial coatings, passive coatings, and combinatorial methods, with examples from the literature. We end our analysis by identifying the gaps existing in the present research and investigating future possibilities that can decrease ventilator-associated pneumonia cases and improve patient comfort during treatment.

Wound dressings for skin lesions, such as bedsores or pressure ulcers, are widely used for many patients, both during hospitalization and in subsequent treatment at home. To improve the treatment and shorten the healing time and, therefore, the cost, numerous types of wound dressings have been developed by manufacturers. Considering certain inconveniences related to the intolerance of some patients to antibiotics and the antimicrobial, antioxidant, and curative properties of certain essential oils, we conducted research by incorporating these oils, based on polyvinyl alcohol/ polyvinyl pyrrolidone (PVA/PVP) biopolymers, into dressings. The objective of this study was to study the potential of a polymeric matrix for wound healing, with polyvinyl alcohol as the main material and polyvinyl pyrrolidone and hydroxypropyl methylcellulose (HPMC) as secondary materials, together with additives (plasticizers poly(ethylene glycol) (PEG) and glycerol), stabilizers (Zn stearate), antioxidants (vitamin A and vitamin E), and four types of essential oils (fennel, peppermint, pine, and thyme essential oils). For all the studied samples, the combining compatibility, antimicrobial, and cytotoxicity properties were investigated. The obtained results demonstrated a uniform morphology for almost all the samples and adequate barrier properties for contact with suppurating wounds. The results show that the obtained samples containing essential oils have a good inhibitory effect on, or antimicrobial properties against, Staphylococcus aureus ATCC 25923, Enterococcus faecalis ATCC 29212, Escherichia coli ATCC 25922, Pseudomonas aeruginosa ATCC 27853, and Candida albicans ATCC 10231. The MTT assay showed that the tested samples were not toxic and did not lead to cell death. The results showed that the essential oils used provide an effective solution as active substances in wound dressings.