Explore the vast range of titles available.

A recently launched project under the auspices of the World Climate Research Program’s (WCRP) Coordinated Regional Downscaling Experiments Flagship Pilot Studies program (CORDEX-FPS) is presented. This initiative aims to build first-of-its-kind ensemble climate experiments of convection permitting models to investigate present and future convective processes and related extremes over Europe and the Mediterranean. In this manuscript the rationale, scientific aims and approaches are presented along with some preliminary results from the testing phase of the project. Three test cases were selected in order to obtain a first look at the ensemble performance. The test cases covered a summertime extreme precipitation event over Austria, a fall Foehn event over the Swiss Alps and an intensively documented fall event along the Mediterranean coast. The test cases were run in both “weather-like” (WL, initialized just before the event in question) and “climate” (CM, initialized 1 month before the event) modes. Ensembles of 18–21 members, representing six different modeling systems with different physics and modelling chain options, was generated for the test cases (27 modeling teams have committed to perform the longer climate simulations). Results indicate that, when run in WL mode, the ensemble captures all three events quite well with ensemble correlation skill scores of 0.67, 0.82 and 0.91. They suggest that the more the event is driven by large-scale conditions, the closer the agreement between the ensemble members. Even in climate mode the large-scale driven events over the Swiss Alps and the Mediterranean coasts are still captured (ensemble correlation skill scores of 0.90 and 0.62, respectively), but the inter-model spread increases as expected. In the case over Mediterranean the effects of local-scale interactions between flow and orography and land–ocean contrasts are readily apparent. However, there is a much larger, though not surprising, increase in the spread for the Austrian event, which was weakly forced by the large-scale flow. Though the ensemble correlation skill score is still quite high (0.80). The preliminary results illustrate both the promise and the challenges that convection permitting modeling faces and make a strong argument for an ensemble-based approach to investigating high impact convective processes.

Global and regional climate models (respectively GCMs and RCMs) are delivering conflicting messages about summertime climate change in Europe, revealing notably a weaker warming in RCMs. A dedicated multimodel ensemble of nine GCM‐RCM pairs is analyzed to assess the role of anthropogenic aerosols in these inconsistencies. The expected decrease of anthropogenic aerosol concentrations is found both to modify the future evolution of shortwave radiation and to generate an extra warming. For every tenth in aerosol optical depth drop in Central Europe, shortwave radiation is increased at the surface by 6.3 Wm−2$\\mathrm{W}{\\mathrm{m}}^{-2}$and decreased at the top of the atmosphere by 5.6 Wm−2$\\mathrm{W}{\\mathrm{m}}^{-2}$ , while near‐surface temperature is increased by 0.3°^{\\circ}$ C. The consideration of time‐varying anthropogenic aerosols in RCMs thus contributes to improving GCM/RCM consistency in Europe for these three variables, but not for water cycle. The results obtained underline the necessity to better consider aerosols in upcoming regional climate simulations. Plain Language Summary As far as summertime climate change in Europe is concerned, global and regional climate models do not provide exactly the same information, insofar as the warming simulated by regional models is notably lower than in global models. The decrease of anthropogenic aerosol concentrations, not always taken into account in regional models, could be one possible explanation of these inconsistencies. This hypothesis is analyzed here with the help of a dedicated multimodel ensemble of simulations with constant and evolving aerosols. This evolution of aerosols is shown to increase surface solar radiation and near‐surface temperature in Europe. The consideration of time‐varying anthropogenic aerosols in regional climate models thus contributes to reducing the differences between global and regional climate simulations. Key Points The role of anthropogenic aerosols in European summertime climate change is assessed using a set of multi‐model regional climate simulations Reduced concentrations of anthropogenic aerosols in Europe lead to an increase in surface solar radiation and an extra warming near surface Current differences in aerosol representation explain a part of inconsistencies between global and regional climate projections in Europe

As global temperatures continue to rise, the impact of heatwaves becomes increasingly striking. The increasing frequency and intensity of these events underscore the critical need to understand regional‐scale mechanisms and feedback, exacerbating or mitigating heatwave magnitude. Here, we use an ensemble of convection‐permitting regional climate models (CPRCMs) to elucidate future heatwave changes at fine spatial scales. We explore whether the recently highlighted drier/warmer signal introduced by CPRCMs improves summer temperature extremes representation and if it modulates future heatwave changes compared to convection‐parameterizing regional climate models (RCMs). In historical runs, CPRCMs show a more realistic representation of summer maximum temperature especially on a ground‐station‐based evaluation. CPRCMs project substantially drier conditions than RCMs. This is associated with a modulation of heatwave temperature changes which show diversified spatial patterns, magnitudes, and signs. CPRCMs ensemble shows an overall reduction in heatwave metrics future changes inter‐model spread compared to the RCMs ensemble. Plain Language Summary Heatwaves are progressively having a bigger impact on communities and ecosystems. The growing frequency and intensity of these events highlight the need to understand regional mechanisms and feedback that can either worsen or mitigate increasing heatwave trends. We use an ensemble of very high‐resolution regional climate models (CPRCMs, ∼3 km) to explore changes in heatwaves at fine spatial scales. We investigate if the drier and warmer conditions characterizing CPRCMs improve the accuracy of summer temperature extremes and how they affect future heatwave patterns compared to lower‐resolution regional climate models (RCMs). In historical simulations, CPRCMs provide a more accurate representation of summer maximum temperatures, especially on a station‐based evaluation. CPRCMs predict drier conditions than RCMs. This dryness affects heatwave temperature changes according to varied spatial patterns, magnitudes, and trends. Overall, the CPRCMs ensemble shows less uncertainty in predicted heatwave changes compared to the RCMs ensemble. Key Points CPRCMs improve summer season maximum temperature representation, especially on a ground‐station‐based evaluation CPRCMs amplify heatwave maximum temperature changes over the Alps and the northern GAR, combined with the strongest projected drying CPRCMs ensemble reduces heatwave metrics change signal inter‐model spread except for the dry spell length

A representation of atmospheric chemistry has been included in the Integrated Forecasting System (IFS) of the European Centre for Medium-Range Weather Forecasts (ECMWF). The new chemistry modules complement the aerosol modules of the IFS for atmospheric composition, which is named C-IFS. C-IFS for chemistry supersedes a coupled system in which chemical transport model (CTM) Model for OZone and Related chemical Tracers 3 was two-way coupled to the IFS (IFS-MOZART). This paper contains a description of the new on-line implementation, an evaluation with observations and a comparison of the performance of C-IFS with MOZART and with a re-analysis of atmospheric composition produced by IFS-MOZART within the Monitoring Atmospheric Composition and Climate (MACC) project. The chemical mechanism of C-IFS is an extended version of the Carbon Bond 2005 (CB05) chemical mechanism as implemented in CTM Transport Model 5 (TM5). CB05 describes tropospheric chemistry with 54 species and 126 reactions. Wet deposition and lightning nitrogen monoxide (NO) emissions are modelled in C-IFS using the detailed input of the IFS physics package. A 1 year simulation by C-IFS, MOZART and the MACC re-analysis is evaluated against ozonesondes, carbon monoxide (CO) aircraft profiles, European surface observations of ozone (O3), CO, sulfur dioxide (SO2) and nitrogen dioxide (NO2) as well as satellite retrievals of CO, tropospheric NO2 and formaldehyde. Anthropogenic emissions from the MACC/CityZen (MACCity) inventory and biomass burning emissions from the Global Fire Assimilation System (GFAS) data set were used in the simulations by both C-IFS and MOZART. C-IFS (CB05) showed an improved performance with respect to MOZART for CO, upper tropospheric O3, and wintertime SO2, and was of a similar accuracy for other evaluated species. C-IFS (CB05) is about 10 times more computationally efficient than IFS-MOZART.

In the current work we present six hindcast WRF (Weather Research and Forecasting model) simulations for the EURO-CORDEX (European Coordinated Regional Climate Downscaling Experiment) domain with different configurations in microphysics, convection and radiation for the time period 1990–2008. All regional model simulations are forced by the ERA-Interim reanalysis and have the same spatial resolution (0.44°). These simulations are evaluated for surface temperature, precipitation, short- and longwave downward radiation at the surface and total cloud cover. The analysis of the WRF ensemble indicates systematic temperature and precipitation biases, which are linked to different physical mechanisms in the summer and winter seasons. Overestimation of total cloud cover and underestimation of downward shortwave radiation at the surface, mostly linked to the Grell–Devenyi convection and CAM (Community Atmosphere Model) radiation schemes, intensifies the negative bias in summer temperatures over northern Europe (max −2.5 °C). Conversely, a strong positive bias in downward shortwave radiation in summer over central (40–60%) and southern Europe mitigates the systematic cold bias over these regions, signifying a typical case of error compensation. Maximum winter cold biases are over northeastern Europe (−2.8 °C); this location suggests that land–atmosphere rather than cloud–radiation interactions are to blame. Precipitation is overestimated in summer by all model configurations, especially the higher quantiles which are associated with summertime deep cumulus convection. The largest precipitation biases are produced by the Kain–Fritsch convection scheme over the Mediterranean. Precipitation biases in winter are lower than those for summer in all model configurations (15–30%). The results of this study indicate the importance of evaluating not only the basic climatic parameters of interest for climate change applications (temperature and precipitation), but also other components of the energy and water cycle, in order to identify the sources of systematic biases, possible compensatory or masking mechanisms and suggest pathways for model improvement.

Daily global analyses and 5-day forecasts are generated in the context of the European Monitoring Atmospheric Composition and Climate (MACC) project using an extended version of the Integrated Forecasting System (IFS) of the European Centre for Medium-Range Weather Forecasts (ECMWF). The IFS now includes modules for chemistry, deposition and emission of reactive gases, aerosols, and greenhouse gases, and the 4-dimensional variational data assimilation scheme makes use of multiple satellite observations of atmospheric composition in addition to meteorological observations. This paper describes the data assimilation setup of the new Composition-IFS (C-IFS) with respect to reactive gases and validates analysis fields of ozone (O3), carbon monoxide (CO), and nitrogen dioxide (NO2) for the year 2008 against independent observations and a control run without data assimilation. The largest improvement in CO by assimilation of Measurements of Pollution in the Troposphere (MOPITT) CO columns is seen in the lower troposphere of the Northern Hemisphere (NH) extratropics during winter, and during the South African biomass-burning season. The assimilation of several O3 total column and stratospheric profile retrievals greatly improves the total column, stratospheric and upper tropospheric O3 analysis fields relative to the control run. The impact on lower tropospheric ozone, which comes from the residual of the total column and stratospheric profile O3 data, is smaller, but nevertheless there is some improvement particularly in the NH during winter and spring. The impact of the assimilation of tropospheric NO2 columns from the Ozone Monitoring Instrument (OMI) is small because of the short lifetime of NO2, suggesting that NO2 observations would be better used to adjust emissions instead of initial conditions. The results further indicate that the quality of the tropospheric analyses and of the stratospheric ozone analysis obtained with the C-IFS system has improved compared to the previous \"coupled\" model system of MACC.

Recent studies using convection-permitting (CP) climate simulations have demonstrated a step-change in the representation of heavy rainfall and rainfall characteristics (frequency-intensity) compared to coarser resolution Global and Regional climate models. The goal of this study is to better understand what explains the weaker frequency of precipitation in the CP ensemble by assessing the triggering process of precipitation in the different ensembles of regional climate simulations available over Europe. We focus on the statistical relationship between tropospheric temperature, humidity and precipitation to understand how the frequency of precipitation over Europe and the Mediterranean is impacted by model resolution and the representation of convection (parameterized vs. explicit). We employ a multi-model data-set with three different resolutions (0.44°, 0.11° and 0.0275°) produced in the context of the MED-CORDEX, EURO-CORDEX and the CORDEX Flagship Pilot Study \"Convective Phenomena over Europe and the Mediterranean\" (FPSCONV). The multi-variate approach is applied to all model ensembles, and to several surface stations where the integrated water vapor (IWV) is derived from Global Positioning System (GPS) measurements. The results show that all model ensembles capture the temperature dependence of the critical value of IWV (IWVcv), above which an increase in precipitation frequency occurs, but the differences between the models in terms of the value of IWVcv, and the probability of its being exceeded, can be large at higher temperatures. The lower frequency of precipitation in convection-permitting simulations is not only explained by higher temperatures but also by a higher IWVcv necessary to trigger precipitation at similar temperatures, and a lower probability to exceed this critical value. The spread between models in simulating IWVcv and the probability of exceeding IWVcv is reduced over land in the ensemble of models with explicit convection, especially at high temperatures, when the convective fraction of total precipitation becomes more important and the influence of the representation of entrainment in models thus becomes more important. Over lowlands, both model resolution and convection representation affect precipitation triggering while over mountainous areas, resolution has the highest impact due to orography-induced triggering processes. Over the sea, since lifting is produced by large-scale convergence, the probability to exceed IWVcv does not depend on temperature, and the model resolution does not have a clear impact on the results.

The biophysical effects of reforestation and afforestation (herein jointly called re/afforestation) on the diurnal temperature cycle in European summer are investigated by analyzing a regional climate model (RCM) ensemble, established within the Land Use and Climate Across Scales Flagship Pilot Study (LUCAS FPS). With this RCM ensemble, two idealized experiments are performed for Europe, one with a continent with maximized forest cover, and one in which all forests are turned into grassland. First, an in-depth analysis of one ensemble member (“CCLM-VEG3D”) is carried out, to reveal the complex process chain caused by such land use changes (LUCs). From these findings, the whole ensemble is analyzed and principal biophysical effects of re/afforestation are derived. Results show that the diurnal temperature range is reduced at the surface (top of the vegetation) with re/afforestation. Most RCMs simulate colder surface temperatures T surf during the day and warmer T surf during the night. Thus, for the first time, the principal temperature interrelations found in observation-based studies in the midlatitudes could be reproduced within a model intercomparison study. On the contrary, the diurnal temperature range in the lowest atmospheric model level (T air) is increased with re/afforestation. This opposing temperature response is mainly caused by the higher surface roughness of forest, enhancing the turbulent heat exchange. Furthermore, these opposing temperature responses demonstrate that the use of the diagnostic 2-m temperature (weighted interpolation between T surf and T air) has a limited potential to assess the effects of re/afforestation. Thus, studies about the biophysical impacts of LUCs should investigate the whole near-surface temperature profile.

Heatwaves (HWs) are high-impact phenomena stressing both societies and ecosystems. Their intensity and frequency are expected to increase in a warmer climate over many regions of the world. While these impacts can be wide-ranging, they are potentially influenced by local to regional features such as topography, land cover, and urbanization. Here, we leverage recent advances in the very high-resolution modelling required to elucidate the impacts of heatwaves at these fine scales. Further, we aim to understand how the new generation of km-scale regional climate models (RCMs) modulates the representation of heatwaves over a well-known climate change hot spot. We analyze an ensemble of 15 convection-permitting regional climate model (CPRCM, ~ 2–4 km grid spacing) simulations and their driving, convection-parameterized regional climate model (RCM, ~ 12–15 km grid spacing) simulations from the CORDEX Flagship Pilot Study on Convection. The focus is on the evaluation experiments (2000–2009) and three subdomains with a range of climatic characteristics. During HWs, and generally in the summer season, CPRCMs exhibit warmer and drier conditions than their driving RCMs. Higher maximum temperatures arise due to an altered heat flux partitioning, with daily peaks up to ~ 150 W/m 2 larger latent heat in RCMs compared to the CPRCMs. This is driven by a 5–25% lower soil moisture content in the CPRCMs, which is in turn related to longer dry spell length (up to double). It is challenging to ascertain whether these differences represent an improvement. However, a point-scale distribution-based maximum temperature evaluation, suggests that this CPRCMs warmer/drier tendency is likely more realistic compared to the RCMs, with ~ 70% of reference sites indicating an added value compared to the driving RCMs, increasing to 95% when only the distribution right tail is considered. Conversely, a CPRCMs slight detrimental effect is found according to the upscaled grid-to-grid approach over flat areas. Certainly, CPRCMs enhance dry conditions, with knock-on implications for summer season temperature overestimation. Whether this improved physical representation of HWs also has implications for future changes is under investigation.

In this work, we assess the ability of RegCM4 regional climate model to simulate surface solar radiation (SSR) patterns over Europe. A decadal RegCM4 run (2000–2009) was implemented and evaluated against satellite-based observations from the Satellite Application Facility on Climate Monitoring (CM SAF), showing that the model simulates adequately the SSR patterns over the region. The SSR bias between RegCM4 and CM SAF is +1.5 % for MFG (Meteosat First Generation) and +3.3 % for MSG (Meteosat Second Generation) observations. The relative contribution of parameters that determine the transmission of solar radiation within the atmosphere to the deviation appearing between RegCM4 and CM SAF SSR is also examined. Cloud macrophysical and microphysical properties such as cloud fractional cover (CFC), cloud optical thickness (COT) and cloud effective radius (Re) from RegCM4 are evaluated against data from CM SAF. Generally, RegCM4 underestimates CFC by 24.3 % and Re for liquid/ice clouds by 36.1 %/28.3 % and overestimates COT by 4.3 %. The same procedure is repeated for aerosol optical properties such as aerosol optical depth (AOD), asymmetry factor (ASY) and single-scattering albedo (SSA), as well as other parameters, including surface broadband albedo (ALB) and water vapor amount (WV), using data from MACv1 aerosol climatology, from CERES satellite sensors and from ERA-Interim reanalysis. It is shown here that the good agreement between RegCM4 and satellite-based SSR observations can be partially attributed to counteracting effects among the above mentioned parameters. The potential contribution of each parameter to the RegCM4–CM SAF SSR deviations is estimated with the combined use of the aforementioned data and a radiative transfer model (SBDART). CFC, COT and AOD are the major determinants of these deviations on a monthly basis; however, the other parameters also play an important role for specific regions and seasons. Overall, for the European domain, CFC, COT and AOD are the most important factors, since their underestimations and overestimations by RegCM4 cause an annual RegCM4–CM SAF SSR absolute deviation of 8.4, 3.8 and 4.5 %, respectively.