Explore the vast range of titles available.

Fish discards and by-products can be transformed into high value-added products such as fish protein hydrolysates (FPH) containing bioactive peptides. Protein hydrolysates were prepared from different parts (whole fish, skin and head) of several discarded species of the North-West Spain fishing fleet using Alcalase. All hydrolysates had moisture and ash contents lower than 10% and 15%, respectively. The fat content of FPH varied between 1.5% and 9.4% and had high protein content (69.8–76.6%). The amino acids profiles of FPH are quite similar and the most abundant amino acids were glutamic and aspartic acids. All FPH exhibited antioxidant activity and those obtained from Atlantic horse mackerel heads presented the highest 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity, reducing power and Cu2+ chelating activity. On the other hand, hydrolysates from gurnard heads showed the highest ABTS radical scavenging activity and Fe2+ chelating activity. In what concerns the α-amylase inhibitory activity, the IC50 values recorded for FPH ranged between 5.70 and 84.37 mg/mL for blue whiting heads and whole Atlantic horse mackerel, respectively. α-Glucosidase inhibitory activity of FPH was relatively low but all FPH had high Angiotensin Converting Enzyme (ACE) inhibitory activity. Considering the biological activities, these FPH are potential natural additives for functional foods or nutraceuticals.

This study details a biorefinery approach to valorize Dosidicus gigas squid pen waste. The process starts with the enzymatic deproteinization of squid pens, which prove effective with both Alcalase and Novozym, with the latter exhibiting a slightly higher efficiency to yield a material with 73% chitin content. Subsequent alkaline hydrolysis produces highly deacetylated chitosan (>90% degree of deacetylation), followed by controlled depolymerization to obtain polymers with molecular weights ranging from 50 to 251 kDa. Both native and depolymerized chitosan exhibit antimicrobial activity against Escherichia coli and Bacillus cereus, with B. cereus demonstrating greater resistance to chitosan compared to E. coli. The research also explores the bioconversion of deproteinization and deacetylation effluents. Deproteinization effluents prove superior in sustaining microbial growth, supporting comparable growth and lactic acid production for human probiotic strains (Lactobacillus plantarum and Leuconostoc mesenteroides) when substituting commercial peptones. Marine bacteria (Pseudomonas fluorescens and Phaeobacter sp.) show lower productivity. Integrating these processes into a biorefinery framework enables the conversion of 1 kg of dry squid pens into 350 g of chitosan, and facilitates the production of 937–949 g of lactic acid using human lactic acid bacteria cultures in media formulated with squid pen-derived effluents, glucose, yeast extract, and mineral salts. This integrated approach highlights the potential for maximizing resource utilization from squid pen waste, reducing environmental impact and generating high-value bioproducts.

Rising trends in fish filleting are increasing the amount of processing by-products, such as skins of turbot, a flatfish of high commercial value. In line with circular economy principles, we propose the valorization of turbot skins through a two-step process: initial gelatin extraction described for the first time in turbot, followed by hydrolysis of the remaining solids to produce collagen hydrolysates. We assayed several methods for gelatin extraction, finding differences in gelatin properties depending on chemical treatment and temperature. Of all methods, the application of NaOH, sulfuric, and citric acids at 22 °C results in the highest gel strength (177 g), storage and loss moduli, and gel stability. We found no relation between mechanical properties and content of pyrrolidine amino acids, but the best performing gelatin displays higher structural integrity, with less than 30% of the material below 100 kDa. Collagen hydrolysis was more efficient with papain than alcalase, leading to a greater reduction in Mw of the hydrolysates, which contain a higher proportion of essential amino acids than gelatin and show high in vitro anti-hypertensive activity. These results highlight the suitability of turbot skin by-products as a source of gelatin and the potential of collagen hydrolysates as a functional food and feed ingredient.

The aim of this work was the recovery of protein substrates from monkfish waste (heads and viscera) generated in the on-board processing of this species. Initially, the effect of pH, temperature, and protease concentration was studied on mixtures of a 1:1 ratio (w/v) of monkfish heads/water. The optimal conditions of proteolytic digestion were established at 57.4 °C, pH 8.31, [Alcalase] = 0.05% (v/w) for 3 h of hydrolysis. Later on, a set of hydrolysis at 5L-pH-stat reactor were run under the aforementioned conditions, confirming the validity of the optimization studies for the head and viscera of monkfish. Regarding the chemical properties of the fish protein hydrolysates (FPH), the yield of digestion was higher than 90% in both cases and the degrees of hydrolysis and the soluble protein content were not especially large (<20% and <45 g/L, respectively). In vitro digestibility was higher than 90% and the percentage of essential amino acids ranged from 40 to 42%. Antioxidant activities were higher in viscera FPH, and antihypertensive ability was superior in head FPH. The values of number average molecular weights (Mn) of monkfish hydrolysates were 600 Da in the viscera and 947 Da in the head. The peptide size distribution, obtained by size-exclusion chromatography, indicated that the largest presence of peptides below 1000 Da and 200 Da was observed in the viscera FPH.

Valorization of seabass and seabream by-products is becoming increasingly relevant, as marketing of these species moves from selling whole fish to filleting for convenience products. With this aim, we optimized for the first time the production of fish protein hydrolysates (FPH) by enzymatic hydrolysis from filleting by-products of these commercially relevant aquaculture species, isolating fish oil at the same time. On the whole, both fish yielded similar amounts of protein, but frames and trimmings (FT) were the best source, followed by heads and viscera. In vitro antioxidant and antihypertensive activities showed similar figures for both species, placing FPHs from FT as the most active. Molecular weights ranged from 1381 to 2023 Da, corresponding to the lowest values of FT, in line with the higher hydrolysis degrees observed. All FPHs reached high digestibility (>86%) and displayed an excellent amino acid profile in terms of essential amino acids and flavor, making them suitable as food additives and supplements.

Chondroitin sulfate (CS) is a glycosaminoglycan actively researched for pharmaceutical, nutraceutical and tissue engineering applications. CS extracted from marine animals displays different features from common terrestrial sources, resulting in distinct properties, such as anti-viral and anti-metastatic. Therefore, exploration of undescribed marine species holds potential to expand the possibilities of currently-known CS. Accordingly, we have studied for the first time the production and characterization of CS from blackmouth catshark (Galeus melastomus), a shark species commonly discarded as by-catch. The process of CS purification consists of cartilage hydrolysis with alcalase, followed by two different chemical treatments and ending with membrane purification. All steps were optimized by response surface methodology. According to this, the best conditions for cartilage proteolysis were established at 52.9 °C and pH = 7.31. Subsequent purification by either alkaline treatment or hydroalcoholic alkaline precipitation yielded CS with purities of 81.2%, 82.3% and 97.4% respectively, after 30-kDa membrane separation. The molecular weight of CS obtained ranges 53–66 kDa, depending on the conditions. Sulfation profiles were similar for all materials, with dominant CS-C (GlcA-GalNAc6S) units (55%), followed by 23–24% of CS-A (GlcA-GalNAc4S), a substantial amount (15–16%) of CS-D (GlcA2S-GalNAc6S) and less than 7% of other disulfated and unsulfated disaccharides.

Implantable medical devices (IMDs) are susceptible to microbial adhesion and biofilm formation, which lead to several clinical complications, including the occurrence of implant-associated infections. Polylactic acid (PLA) and its composites are currently used for the construction of IMDs. In addition, chitosan (CS) is a natural polymer that has been widely used in the medical field due to its antimicrobial and antibiofilm properties, which can be dependent on molecular weight (Mw). The present study aims to evaluate the performance of CS-based surfaces of different Mw to inhibit bacterial biofilm formation. For this purpose, CS-based surfaces were produced by dip-coating and the presence of CS and its derivatives onto PLA films, as well surface homogeneity were confirmed by contact angle measurements, Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The antimicrobial activity of the functionalized surfaces was evaluated against single- and dual-species biofilms of Staphylococcus aureus and Pseudomonas aeruginosa. Chitosan-based surfaces were able to inhibit the development of single- and dual-species biofilms by reducing the number of total, viable, culturable, and viable but nonculturable cells up to 79%, 90%, 81%, and 96%, respectively, being their activity dependent on chitosan Mw. The effect of CS-based surfaces on the inhibition of biofilm formation was corroborated by biofilm structure analysis using confocal laser scanning microscopy (CLSM), which revealed a decrease in the biovolume and thickness of the biofilm formed on CS-based surfaces compared to PLA. Overall, these results support the potential of low Mw CS for coating polymeric devices such as IMDs where the two bacteria tested are common colonizers and reduce their biofilm formation.

The growing requirement for sustainable processes has boosted the development of biodegradable plastic-based materials incorporating bioactive compounds obtained from waste, adding value to these products. Chitosan (Ch) is a biopolymer that can be obtained by deacetylation of chitin (found abundantly in waste from the fishery industry) and has valuable properties such as biocompatibility, biodegradability, antimicrobial activity, and easy film-forming ability. This study aimed to produce and characterize poly(lactic acid) (PLA) surfaces coated with β-chitosan and β-chitooligosaccharides from a Loligo opalescens pen with different molecular weights for application in the food industry. The PLA films with native and depolymerized Ch were functionalized through plasma oxygen treatment followed by dip-coating, and their physicochemical properties were assessed by Fourier-transform infrared spectroscopy, X-ray diffraction, water contact angle, and scanning electron microscopy. Their antimicrobial properties were assessed against Escherichia coli and Pseudomonas putida, where Ch-based surfaces reduced the number of biofilm viable, viable but nonculturable, and culturable cells by up to 73%, 74%, and 87%, respectively, compared to PLA. Biofilm growth inhibition was confirmed by confocal laser scanning microscopy. Results suggest that Ch films of higher molecular weight had higher antibiofilm activity under the food storage conditions mimicked in this work, contributing simultaneously to the reuse of marine waste.

This work reports on the synthesis and electrochemical investigation of sustainable carbon–TiO2 nanocomposites derived from marine biowaste, designed to elucidate light-assisted charge storage mechanisms in non-aqueous electrolytes. Porous carbons obtained from prawn chitin and blue shark gelatin were decorated in situ with TiO2 nanoparticles using a deep eutectic solvent (DES) as a green synthesis medium. Structural and morphological characterisation revealed that TiO2 incorporation induces significant nanoscale reorganisation of the carbon framework, resulting in hierarchical porosity, increased surface area, and intimate semiconductor–carbon interfaces. Electrochemical evaluation in a three-electrode configuration using an ethaline-based DES electrolyte demonstrated that TiO2 decoration substantially enhances capacitive performance and cycling stability, with the prawn chitin-derived composite achieving a specific capacitance of 54 ± 3 F g−1 and 91% retention after 10,000 cycles. Under illumination, all TiO2-containing composites exhibited a pronounced increase in anodic current response and discharge time, indicating photo-assisted surface charge accumulation. Although the absolute capacitance values are modest compared to those of aqueous supercapacitor systems, the results provide mechanistic insight into the interplay among nanostructure, semiconductor photoactivity, and ion transport in viscous, hydrogen-bonded DES electrolytes. By combining waste-derived carbons, green synthesis routes, and photo-responsive nanostructures, this study highlights a sustainable strategy for developing multifunctional carbon-based nanomaterials with light-modulated electrochemical behaviour.

Acid-soluble collagens from European hake and Blue shark skin were isolated, characterized, and compared. As the structure of collagen determines its function, the final objective of this study was to investigate biochemical differences between both collagens to identify future potential applications. Chromatographic behavior revealed differences in collagen from both species. Increases of temperature and stirring time produced no effect on European hake collagen solubility in the mobile phase, resulting in the same chromatographic profiles. Conversely, the application of temperature and stirring-time increments showed a positive effect on Blue shark collagen solubility, resulting in different chromatographic profiles and observing higher molecular weight components when sample is incubated at 50 °C (15 min) after 48 h stirring. To test if the different chromatographic behavior exhibited by both collagens could be influenced by differences in subunit composition (alpha-chains), cation exchange chromatography was employed to separate collagen subunits. The electrophoretic patterns and gel permeation chromatography with light-scattering detection (GPC-LS) results of the obtained cation exchange peak fractions revealed differences regarding subunit composition between both species, influencing the crosslinking pattern. This is the first comparative study using GPC-LS to provide information of European hake and Blue shark collagen subunit composition.