Explore the vast range of titles available.

Patchoulol, a valuable compound belonging to the sesquiterpenoid family, is the primary component of patchouli oil produced by Pogostemon cablin ( P. cablin ). It has a variety of pharmacological and biological activities and is widely used in the medical and cosmetic industries. However, despite its significance, there is a lack of research on the transcriptional modulation of patchoulol biosynthesis. Salicylic acid (SA), is a vital plant hormone that serves as a critical signal molecule and plays an essential role in plant growth and defense. However, to date, no studies have explored the modulation of patchoulol biosynthesis by SA. In our study, we discovered that the application of SA can enhance the production of patchoulol. Utilizing transcriptome analysis of SA-treated P. cablin , we identified a crucial downstream transcription factor, PatWRKY71. The transcription level of PatWRKY71 was significantly increased with the use of SA. Furthermore, our research has revealed that PatWRKY71 was capable of binding to the promoter of PatPTS , ultimately leading to an increase in its expression. When PatWRKY71 was silenced by a virus, the expression of both PatWRKY71 and PatPTS was reduced, resulting in the down-regulation of patchoulol production. Through our studies, we discovered that heterologous expression of PatWRKY71 leads to an increase in the sensitivity of Arabidopsis to salt and Cd, as well as an outbreak of reactive oxygen species (ROS). Additionally, we uncovered the regulatory role of PatWRKY71 in both patchoulol biosynthesis and plant defense response. This discovery provided a theoretical basis for the improvement of the content of patchoulol and the resistance of P. cablin through genetic engineering.

As a strategic resource for both medicine and essential oil, the healthy development of the Pogostemon cablin industry is crucial for the traditional medicine and fragrance sectors. Bacterial wilt represents one of the most significant threats to patchouli cultivation; however, the molecular mechanisms underlying P. cablin ’s response to bacterial wilt remain unexplored. Here, we conducted transcriptome and metabolome analyses, revealing an increase in the expression of genes associated with lipid pathways and a corresponding rise in the concentration of lipid metabolites in P. cablin following infection by the bacterial wilt pathogen SY1 . Further lipidomics analysis demonstrated a significant upregulation of ceramide levels due to SY1 infection. Additionally, hormone analysis indicated that SY1 significantly induced an increase in abscisic acid (ABA) concentration, accompanied by the upregulation of genes involved in the ABA synthesis pathway and its downstream signaling pathways. Furthermore, we treated P. cablin seedlings with the ceramide synthase inhibitor FB1, which significantly reduced ceramide concentration in P. cablin . FB1 treatment also inhibited the expression of ABA-synthesizing genes, leading to a notable decrease in ABA concentration and downstream pathway genes. These data indicate that ceramides and ABA may participate in P. cablin ’s response to SY1 .

Polyvinylidene fluoride (PVDF)/Polymethylmethacrylate (PMMA)/Titanium dioxide (TiO 2 ) composite, and its films was prepared and studied in detail. The structure, morphology, crystalline behavior, thermal, and mechanical properties of PVDF/PMMA/TiO 2 film were investigated through FT-IR/ATR, SEM, XRD, DSC, TGA, and Py-GC/MS, respectively. The results showed that the blended material and its film have favorable thermal and mechanical properties. The TiO 2 particles finely dispersed in the composite featured by crystalline regions of PVDF and homogeneous amorphous regions consisted of PVDF and PMMA, resulting in an advantageous properties and improvement of tensile strength and elongation at break of the PVDF/PMMA film. However, the TiO 2 can greatly narrow the thermally stable margin of PVDF in PVDF/PMMA/TiO 2 composite for at least 100 °C with catalysis decomposition effect.

Alkaptonuria is a rare inherited metabolic disorder caused by impaired homogentisic acid metabolism. Ochronotic arthropathy is a late musculoskeletal manifestation and may mimic ordinary degenerative osteoarthritis in older adults. This diagnostic overlap may delay recognition of the underlying systemic metabolic disease. A 67-year-old woman presented with progressive pain and restricted motion of the left knee and hip for four years. Preoperative imaging suggested advanced degenerative arthropathy. However, she had a long-standing history of urine darkening after standing and imaging evidence of multi-joint and spinal involvement. During left total knee arthroplasty, diffuse black-brown pigmentation of the articular cartilage and synovium was observed. Histopathological examination demonstrated ochronotic pigment deposition. The patient subsequently underwent staged left total knee and total hip arthroplasty. At five-year follow-up, knee and hip function were satisfactory, and radiographs showed stable prosthesis positioning without loosening. Ochronotic arthropathy should be considered in older patients with atypical multi-joint degenerative changes, particularly when urine darkening, spinal involvement, or intraoperative black-brown cartilage pigmentation is present. Although biochemical or genetic confirmation is ideal, clinicopathological recognition remains important. Staged joint arthroplasty may provide durable pain relief and functional improvement in advanced ochronotic arthropathy.

We report a method for building a simple and reproducible electronic nose based on commercially available metal oxide sensors (MOS) to monitor the freshness of hairtail fish and pork stored at 15, 10, and 5 °C. After assembly in the laboratory, the proposed product was tested by a manufacturer. Sample delivery was based on the dynamic headspace method, and two features were extracted from the transient response of each sensor using an unsupervised principal component analysis (PCA) method. The compensation method and pattern recognition based on PCA are discussed in the current paper. PCA compensation can be used for all storage temperatures, however, pattern recognition differs according to storage conditions. Total volatile basic nitrogen (TVBN) and aerobic bacterial counts of the samples were measured simultaneously with the standard indicators of hairtail fish and pork freshness. The PCA models based on TVBN and aerobic bacterial counts were used to classify hairtail fish samples as “fresh” (TVBN ≤ 25 g and microbial counts ≤ 106 cfu/g) or “spoiled” (TVBN ≥ 25 g and microbial counts ≥ 106 cfu/g) and pork samples also as “fresh” (TVBN ≤ 15 g and microbial counts ≤ 106 cfu/g) or “spoiled” (TVBN ≥ 15 g and microbial counts ≥ 106 cfu/g). Good correlation coefficients between the responses of the electronic nose and the TVBN and aerobic bacterial counts of the samples were obtained. For hairtail fish, correlation coefficients were 0.97 and 0.91, and for pork, correlation coefficients were 0.81 and 0.88, respectively. Through laboratory simulation and field application, we were able to determine that the electronic nose could help ensure the shelf life of hairtail fish and pork, especially when an instrument is needed to take measurements rapidly. The results also showed that the electronic nose could analyze the process and level of spoilage for hairtail fish and pork.

In this study, the isothermal saturation method was applied to obtain the data for solid–liquid equilibria in a system consisting of four solids (LiCl + NaCl + Li2SO4 + Na2SO4) and water at 288.15 K. The chemical composition of the liquid phase was experimentally determined, and the corresponding phase diagrams were constructed. The obtained diagram exhibited 6 crystallization areas, 10 univariant curves, and 5 invariant points. The 6 crystallization regions consisted of LiCl·2H2O, Li2SO4·H2O, NaCl, Na2SO4·10H2O, Li2SO4·3Na2SO4·12H2O and Li2SO4·Na2SO4. The solid-phase solubilities and phase equilibria were derived from the experimental data at 288.15 K using Pitzer’s equations. The calculated data were compared with the experiment, and the corresponding phase diagrams for both datasets were calculated. Experimental and theoretical diagrams were in good agreement.

A prospective observational study collected temperature data from 51 patients in 11 neurosurgical centers and follow-up outcome information at 6 months in 49 patients. Brain temperature (Tbr) was measured directly by an intraventricular temperature sensor. Axillary temperature (Tax) and rectal temperature (Tre) were measured by electric thermometers. Tbr was 0.4 to 1.5°C higher than body temperature. Tre correlated well with the Tbr (coefficient: 0.7378; p < 0.05). Among all patients, Glasgow Coma Scale (GCS) scores on admission were significantly lower in the patients with post-operatively extreme peak temperature (Tpeak, < 37°C or >39°C in first 24 h) and major temperature variation (Tvari > 1°C in first 12 h; p < 0.05, p < 0.01, respectively). Among the patients with no temperature intervention, the extreme Tpeak group showed a lower Glasgow Outcome Scale-Extended (GOS-E) score at 6 months (p < 0.05) with lower GCS scores on admission (p < 0.01), compared with the moderate Tpeak group. Remarkably, the major Tvari group showed significantly lower GOS-E scores (p < 0.05) with the same GCS scores as the minor Tvari group. Thus, Tre is the better candidate to estimate Tbr. Spontaneously extreme Tpeak in TBI represents both more serious injury on admission and worse prognosis, and Tvari might be used as a novel prognostic parameter in TBI. Brain temperature is therefore one of the critical indicators evaluating injury severity, prognostication, and monitoring in the management of TBI. This prospective observational study has been registered in ClinicalTrials.gov (https://clinicaltrials.gov), and the registration number is NCT03068143.

The manipulation of the morphology of the active layers is crucial for improving the performance of organic photovoltaic (OPV) devices. In particular, the development of non-fullerene acceptors (NFAs) has led to a large number of new materials with more complex interactions. Therefore, the investigation on the morphology control mechanism is the key aspect in providing guidance for material design and device optimization. In this study, the film morphology optimization using 1,8-diiodooctane (DIO) additive and a ternary fullerene acceptor strategy have been carried out based on the PCE10:ITIC blends. It is seen that suitable amount of DIO helps to increase the crystallization of the blended thin film. However, excessive DIO elevates the crystallization-induced phase separation and the domain size can exceed the exciton diffusion length, leading to efficiency drop. The addition of fullerene acceptor can improve the carrier transport of the blends, and its presence could retard the excessive phase separation induced by DIO additive. Under the joint optimization of the solvent additive and PC71BM acceptor, the film morphology achieves a balance between crystallization and phase separation scales, the exciton diffusion and carrier transport are also optimized, and the short-circuit current (JSC) and fill factor (FF) of the device can be improved significantly.

The oligopeptide transporter (OPT) family contains nine members in Arabidopsis. While there is some evidence that AtOPTs mediate the uptake of tetra- and pentapeptides, OPT homologs in rice (Oryza sativa; OsGT1) and Indian mustard (Brassica juncea; BjGT1) have been described as transporters of glutathione derivatives. This study investigates the possibility that two members of the AtOPT family, AtOPT6 and AtOPT7, may also transport glutathione and its conjugates. Complementation of the hgt1met1 yeast double mutant by plant homologs of the yeast glutathione transporter HGT1 (AtOPT6, AtOPT7, OsGT1, BjGT1) did not restore the growth phenotype, unlike complementation by HGT1. By contrast, complementation by AtOPT6 restored growth of the hgt1 yeast mutant on a medium containing reduced (GSH) or oxidized glutathione as the sole sulfur source and induced uptake of [3H]GSH, whereas complementation by AtOPT7 did not. In these conditions, AtOPT6-dependent GSH uptake in yeast was mediated by a high affinity (K(m) = 400 micromolar) and a low affinity (K(m) = 5 mM) phase. It was strongly competed for by an excess oxidized glutathione and glutathione-N-ethylmaleimide conjugate. Growth assays of yeasts in the presence of cadmium (Cd) suggested that AtOPT6 may transport Cd and Cd/GSH conjugate. Reporter gene experiments showed that AtOPT6 is mainly expressed in dividing areas of the plant (cambium, areas of lateral root initiation). RNA blots on cell suspensions and real-time reverse transcription-PCR on Arabidopsis plants indicated that AtOPT6 expression is strongly induced by primisulfuron and, to a lesser extent, by abscisic acid but not by Cd. Altogether, the data show that the substrate specificity and the physiological functions of AtOPT members may be diverse. In addition to peptide transport, AtOPT6 is able to transport glutathione derivatives and metal complexes, and may be involved in stress resistance.

Using weight loss method, the pomegranate peel extract (PPE), that is a green corrosion inhibitors, have been studied in the corrosion inhibition of Q235A steel in 1M hydrochloric acid solution at 30°C, 45°C, 60°C, respectively. The inhibition rate of extract varies with the extraction concentration in the range of 10 ∼ 1000mg / L, up to 92.7%. Extract inhibits corrosion through adsorption mechanisms. Besides polyphenols hydroxyl and ether groups can slow down corrosion by capturing H+. Polyphenols can remove the dissolved O2, and curb oxygen reducing corrosion. PPE is antifungal active against TGB and FB, but not so active against SRB.