Explore the vast range of titles available.

For practical analysis and simultaneous detection of arbutin (AR) and hydrochinone (HQ) in cosmetics, an electrochemical sensor has been designed based on nitrogen and sulfur co-doped Fe–Ni alloy (N,S-FeNi 3 /C) nanoparticles. The N,S-FeNi 3 /C has been prepared for the first time via hydrothermal synthesis and high-temperature carbonization. N,S-FeNi 3 /C not only improves the charge transfer to the surface, but also provides rich active sites and fast ion diffusion rates owing to the iron and nickel bimetallic materials. In addition, the d-band structure of transition metals (nickel and iron) introduced by the N and S atoms exhibits an electronic structure similar to that of noble metal catalysts, thus enhancing electrocatalytic activity and increasing conductivity. Additionally, the double doping of S and N atoms significantly increases the active sites of carbon atoms; thus, N-S-FeNi3/C exhibits excellent electrochemical catalytic activity for the oxidation of AR and HQ. Further, the N,S-FeNi 3 /C sensor is used for the simultaneous determination of HQ and AR by square-wave pulse voltammetry. Distinct oxidation peaks of HQ and AR are observed at potentials of +0.028 V and +0.352 V (vs. SCE). The electrical signal increases linearly in the HQ concentration ranges of 0.1–100 μM and 0.05–70 μM for the simultaneous determination of AR and HQ with a detection limit as low as 0.0476 and 0.0135 μM (S/N = 3), respectively. Thus, rapid and accurate detection of AR and HQ in spiked cosmetics is successfully achieved, with a recovery ranging from 96.4 to 104.2%, and the relative standard deviation is lower than 3.8–4.0%. Graphical Abstract

The aim of this study was to demonstrate that a defined cosmetic composition is able to induce an increase in the production of sulfated glycosaminoglycans (sGAGs) and/or proteoglycans and finally to demonstrate that the composition, through its combined action of enzyme production and synthesis of macromolecules, modulates organization and skin surface aspect with a benefit in antiaging applications. Gene expression was studied by quantitative reverse transcription polymerase chain reaction using normal human dermal fibroblasts isolated from a 45-year-old donor skin dermis. De novo synthesis of sGAGs and proteoglycans was determined using Blyscan™ assay and/or immunohistochemical techniques. These studies were performed on normal human dermal fibroblasts (41- and 62-year-old donors) and on human skin explants. Dermis organization was studied either ex vivo on skin explants using bi-photon microscopy and transmission electron microscopy or directly in vivo on human volunteers by ultrasound technique. Skin surface modification was investigated in vivo using silicone replicas coupled with macrophotography, and the mechanical properties of the skin were studied using Cutometer. It was first shown that mRNA expression of several genes involved in the synthesis pathway of sGAG was stimulated. An increase in the de novo synthesis of sGAGs was shown at the cellular level despite the age of cells, and this phenomenon was clearly related to the previously observed stimulation of mRNA expression of genes. An increase in the expression of the corresponding core protein of decorin, perlecan, and versican and a stimulation of their respective sGAGs, such as chondroitin sulfate and heparan sulfate, were found on skin explants. The biosynthesis of macromolecules seems to be correlated at the microscopic level to a better organization and quality of the dermis, with collagen fibrils having homogenous diameters. The dermis seems to be compacted as observed on images obtained by two-photon microscopy and ultrasound imaging. At the macroscopic level, this dermis organization shows a smoothed profile similar to a younger skin, with improved mechanical properties such as firmess. The obtained results demonstrate that the defined cosmetic composition induces the synthesis of sGAGs and proteoglycans, which contributes to the overall dermal reorganization. This activity in the dermis in turn impacts the surface and mechanical properties of the skin.

This chapter provides a glimpse of the application of nanotechnology in personal care and cosmetics products, and the possibility of the entry of carbon black fiber in many cosmetic products. Some of the important nanoparticles that are extensively used in enhancing the efficiency of cosmetics include titanium dioxide, zinc oxide, gold, silver, and selenium. Moreover, the role of the silent features and advantages of using these materials are discussed in this chapter. Nanomaterials are used in the manufacture of cosmetics as encapsulation or carrier system to transport agents into deeper skin layers where they activate skin metabolism, improve skin appearance, and act as an optimal UV protective filter in sunscreen. For the purpose of delivery of required nanoparticles from the cosmetics compositions it is imperative that they are formulated in composite forms. Carbon nanomaterials are considered to be safe for humans as well as for the environment because of their toxicological potencies.

This chapter contains sections titled: Non-aqueous Organic Product Sensor Synthetic Leather Two-Part Curable Composition Microchannel Thermocured Silicone Rubber Dry Cleaning of Surfaces Adhesive Tapes Capsules for Beverages Usage for Toner Acoustic Applications High Temperature Gas Line Heater System Cosmetic Compositions Silk Fibers Elastic Silicone Rubber Belt Recycling and Devulcanizing Mobile Robots

Backround: Laboratory and human studies raise concerns about endocrine disruption and asthma from exposure to chemicals in consumer products. Limited labeling or testing information is available to evaluate products as exposure sources. Objectives: We analytically quantified endocrine disruptors and asthma-related chemicals in a range of cosmetics, personal care products, cleaners, sunscreens, and vinyl products. We also evaluated whether product labels provide information that can be used to select products without these chemicals. Methods: We selected 213 commercial products representing 50 product types. We tested 42 composited samples of high-market-share products, and we tested 43 alternative products identified using criteria expected to minimize target compounds. Analytes included parabens, phthalates, bisphenol A (BPA), triclosan, ethanolamines, alkylphenols, fragrances, glycol ethers, cyclosiloxanes, and ultraviolet (UV) filters. Results: We detected 55 compounds, indicating a wide range of exposures from common products. Vinyl products contained > 10% bis(2-ethylhexyl) phthalate (DEHP) and could be an important source of DEHP in homes. In other products, the highest concentrations and numbers of detects were in the fragranced products (e.g., perfume, air fresheners, and dryer sheets) and in sunscreens. Some products that did not contain the well-known endocrine-disrupting phthalates contained other less-studied phthalates (dicyclohexyl phthalate, diisononyl phthalate, and di-n-propyl phthalate; also endocrine-disrupting compounds), suggesting a substitution. Many detected chemicals were not listed on product labels. Conclusions: Common products contain complex mixtures of EDCs and asthma-related compounds. Toxicological studies of these mixtures are needed to understand their biological activity. Regarding epidemiology, our findings raise concern about potential confounding from co-occurring chemicals and misclassification due to variability in product composition. Consumers should be able to avoid some target chemicals—synthetic fragrances, BPA, and regulated active ingredients— using purchasing criteria. More complete product labeling would enable consumers to avoid the rest of the target chemicals.

Artemisia species play a vital role in traditional and contemporary medicine. Among them, Artemisia abrotanum, Artemisia absinthium, Artemisia annua, Artemisia dracunculus, and Artemisia vulgaris are the most popular. The chemical composition and bioactivity of these species have been extensively studied. Studies on these species have confirmed their traditional applications and documented new pharmacological directions and their valuable and potential applications in cosmetology. Artemisia ssp. primarily contain sesquiterpenoid lactones, coumarins, flavonoids, and phenolic acids. Essential oils obtained from these species are of great biological importance. Extracts from Artemisia ssp. have been scientifically proven to exhibit, among others, hepatoprotective, neuroprotective, antidepressant, cytotoxic, and digestion-stimulating activities. In addition, their application in cosmetic products is currently the subject of several studies. Essential oils or extracts from different parts of Artemisia ssp. have been characterized by antibacterial, antifungal, and antioxidant activities. Products with Artemisia extracts, essential oils, or individual compounds can be used on skin, hair, and nails. Artemisia products are also used as ingredients in skincare cosmetics, such as creams, shampoos, essences, serums, masks, lotions, and tonics. This review focuses especially on elucidating the importance of the most popular/important species of the Artemisia genus in the cosmetic industry.

Marine macroalgae, such as Padina boergesenii, are gaining recognition in the cosmetics industry as valuable sources of natural bioactive compounds. This study aimed to investigate the biochemical profile of P. boergesenii and evaluate its potential as a cosmetic ingredient. Fourier-transform infrared (FTIR), gas chromatography–mass spectrometry (GCMS), and high-resolution liquid chromatography–mass spectrometry quadrupole time-of-flight (HRLCMS QTOF) analyses were employed to assess the functional groups, phycocompounds, and beneficial compounds present in P. boergesenii. Pigment estimation, total phenol and protein content determination, DPPH antioxidant analysis, and tyrosinase inhibition assay were conducted to evaluate the extracts’ ability to counteract oxidative stress and address hyperpigmentation concerns. Elemental composition and amino acid quantification were determined using inductively coupled plasma atomic emission spectrometry (ICP-AES) and HRLCMS, respectively. FTIR spectroscopy confirmed diverse functional groups, including halo compounds, alcohols, esters, amines, and acids. GCMS analysis identified moisturizing, conditioning, and anti-aging compounds such as long-chain fatty alcohols, fatty esters, fatty acids, and hydrocarbon derivatives. HRLCMS QTOF analysis revealed phenolic compounds, fatty acid derivatives, peptides, terpenoids, and amino acids with antioxidant, anti-inflammatory, and skin-nourishing properties. Elemental analysis indicated varying concentrations of elements, with silicon (Si) being the most abundant and copper (Cu) being the least abundant. The total phenol content was 86.50 µg/mL, suggesting the presence of antioxidants. The total protein content was 113.72 µg/mL, indicating nourishing and rejuvenating effects. The ethanolic extract exhibited an IC50 value of 36.75 μg/mL in the DPPH assay, indicating significant antioxidant activity. The methanolic extract showed an IC50 value of 42.784 μg/mL. Furthermore, P. boergesenii extracts demonstrated 62.14% inhibition of tyrosinase activity. This comprehensive analysis underscores the potential of P. boergesenii as an effective cosmetic ingredient for enhancing skin health. Given the increasing use of seaweed-based bioactive components in cosmetics, further exploration of P. boergesenii’s potential in the cosmetics industry is warranted to leverage its valuable properties.

The growing concern about the environmental impact and human health risk related to the excessive use of synthetic ingredients in cosmetics and topical formulations calls for the exploration of safe and sustainable natural alternatives. Lignin-rich lignocellulosic industrial wastes such as hazelnut and walnut shells were used as a lignin polymer source. Agro-derived lignins were evaluated as a potential natural active ingredient for health care products. Aside from the structural characteristics of isolated lignins, which were identified by GPC, Py-GC–MS, and 2D HSQC NMR techniques, functional properties such as antioxidant power and UV absorption ability were investigated. The SPF values found for creams containing 5% of hazelnut and walnut lignin content were 6.9 and 4.5, respectively. Additionally, both lignin types presented appropriate protection against UVA radiation, highly interesting property to block the full ultraviolet spectrum. The biological activity of isolated lignins assessed at different concentrations (0.01–1 mg/mL) and different times (24, 48, and 72 h) on murine fibroblast cell line 3T3 suggested their suitability for cosmetic applications.

Essential oils are widely incorporated in cosmetic products, perfumes and related household products due to the variety of their properties but mainly due to their pleasant odour. The composition of these volatile natural complex mixtures may vary depending on the quality of plant material from which they were obtained and the extraction method by which they were derived. These factors are also important in ensuring the safe use of essential oils in personal care products. As they contain compounds with varied chemical structure and effects, skin sensitivity and irritations as well as other symptoms may arise after their application. Although essential oils are considered as safe and nontoxic when used at low concentrations, available scientific literature indicates that essential oils and their compounds may possess a strong allergy potential. This review focuses on side effects and allergy contact dermatitis caused by selected essential oils and their single compounds in cosmetic products, summarizing data from the most recent scientific literature.