Explore the vast range of titles available.

In this study, the effect of several organic nitrogen sources (namely peptone, meat extract—ME, yeast extract—YE, and corn steep liquor—CSL) on d-lactic acid production by Lactobacillus delbrueckii ssp. delbrueckii has been studied. While lactic acid bacteria (LAB) are well-known for their complex nutritional requirements, organic nitrogen source-related cost can be as high as 38% of total operational costs (OPEX), being its nature and concentration critical factors in the growth and productivity of the selected strain. Corn steep liquor (CSL) has been chosen for its adequacy, on the grounds of the d-lactic acid yield, productivity, and its cost per kilogram of product. Finally, orange peel waste hydrolysate supplemented with 37 g/l CSL has been employed for d-lactic acid production, reaching a final yield of 88% and a productivity of 2.35 g/l h. CSL cost has been estimated at 90.78$/ton of d-lactate.

The rapid and efficient consumption of carbon and nitrogen sources by brewer’s yeast is critical for the fermentation process in the brewing industry. The comparison of the growth characterizations of typical ale and lager yeast, as well as their consumption preference to carbon and nitrogen sources were investigated in this study. Results showed that the ale strain grew faster and had a more extended stationary phase than the lager strain. However, the lager strain was more tolerant to the stressful environment in the later stage of fermentation. Meanwhile, the ale and lager yeast strains possessed varying preferences for metabolizing the specific fermentable sugar or free amino acid involved in the wort medium. The lager strain had a strong capacity to synthesize the extracellular invertase required for hydrolyzing sucrose as well as a strong capability to metabolize glucose and fructose. Furthermore, the lager strain had an advantage in consuming Lys, Arg, Val, and Phe, whereas the ale strain had a higher assimilation rate in consuming Tyr. These findings provide valuable insights into selecting the appropriate brewer’s yeast strain based on the wort components for the industrial fermentation process.Key points• The lager strain is more tolerant to the stressful environment.• The lager strain has the great capability to synthesize the extracellular invertase.• The assimilation efficiency of free amino acid varies between ale and lager.

Vine shoots and surplus grape must were assessed as feedstocks for succinic acid production with Actinobacillus succinogenes and Basfia succiniproducens . After acidic and enzymatic hydrolysis, vine shoots released 35–40 g/L total sugars. Both bacterial species produced 18–21 g/L succinic acid from this hydrolysate in 120 h. Regarding grape must fermentation, A. succinogenes clearly outperformed B. succiniproducens . Yeast extract (a source of organic nitrogen and vitamins) was the only additional nutrient needed by A. succinogenes to grow on grape must. Under mathematically optimized conditions (145.7 g/L initial sugars and 24.9 g/L yeast extract), A. succinogenes generated 88.9 ± 1.4 g/L succinic acid in 96 h, reaching a succinic acid yield of 0.66 ± 0.01 g/g and a sugar consumption of 96.64 ± 0.30%. Substrate inhibition was not observed in grape musts with 125–150 g/L initial sugars, provided that an adequate amount of yeast extract was available for bacteria. Alternative nitrogen sources to yeast extract (red wine lees, white wine lees, urea, NH 4 Cl, and choline chloride) were not suitable for A. succinogenes in grape must. Key Points • Vine shoots and surplus grape must were assessed for succinic acid bioproduction. • Succinic acid bioproduction was 21 g/L with vine shoots and 89 g/L with grape must. • Fermentation was efficient at high sugar loads if organic N supply was adequate. Graphical abstract

Biowaste treatment by black soldier fly larvae (BSFL, Hermetia illucens) has received global research interest and growing industrial application. Larvae farming conditions, such as temperature, pH, and moisture, have been critically examined. However, the substrate carbon to nitrogen ratio (C/N), one of the key parameters that may affect larval survival and bioconversion efficiency, is significantly less studied. The current study aimed to compare the nitrogen supplying effects of 9 nitrogen species (i.e., NH4Cl, NaNO3, urea, uric acid, Gly, L-Glu, L-Glu:L-Asp (1:1, w/w), soybean flour, and fish meal) during food waste larval treatment, and further examine the C/N effects on the larval development and bioconversion process, using the C/N adjustment with urea from the initial 21:1 to 18:1, 16:1, 14:1, 12:1, and 10:1, respectively. The food wastes were supplied with the same amount of nitrogen element (1 g N/100 g dry wt) in the nitrogen source trial and different amount of urea in the C/N adjustment trial following larvae treatment. The results showed that NH4Cl and NaNO3 caused significant harmful impacts on the larval survival and bioconversion process, while the 7 organic nitrogen species resulted in no significant negative effect. Further adjustment of C/N with urea showed that the C/N range between 18:1 and 14:1 was optimal for a high waste reduction performance (73.5–84.8%, p < 0.001) and a high larvae yield (25.3–26.6%, p = 0.015), while the C/N range of 18:1 to 16:1 was further optimal for an efficient larval protein yield (10.1–11.1%, p = 0.003) and lipid yield (7.6–8.1%, p = 0.002). The adjustment of C/N influenced the activity of antioxidant enzymes, such as superoxide dismutase (SOD, p = 0.015), whereas exerted no obvious impact on the larval amino acid composition. Altogether, organic nitrogen is more suitable than NH4Cl and NaNO3 as the nitrogen amendment during larval food waste treatment, addition of small amounts of urea, targeting C/N of 18:1–14:1, would improve the waste reduction performance, and application of C/N at 18:1–16:1 would facilitate the larval protein and lipid bioconversion process.

Background Lignocellulosic biomass is one of the most abundant materials for biochemicals production. However, efficient co-utilization of glucose and xylose from the lignocellulosic biomass is a challenge due to the glucose repression in microorganisms. Kluyveromyces marxianus is a thermotolerant and efficient xylose-utilizing yeast. To realize the glucose–xylose co-utilization, analyzing the glucose repression of xylose utilization in K. marxianus is necessary. In addition, a glucose–xylose co-utilization platform strain will facilitate the construction of lignocellulosic biomass-utilizing strains. Results Through gene disruption, hexokinase 1 ( Km HXK1) and sucrose non-fermenting 1 ( Km SNF1) were proved to be involved in the glucose repression of xylose utilization while disruption of the downstream genes of cyclic AMP-protein kinase A (cAMP-PKA) signaling pathway or sucrose non-fermenting 3 (SNF3) glucose-sensing pathway did not alleviate the repression. Furthermore, disruption of the gene of multicopy inhibitor of GAL gene expression ( Km MIG1) alleviated the glucose repression on some nonglucose sugars (galactose, sucrose, and raffinose) but still kept glucose repression of xylose utilization. Real-time PCR analysis of the xylose utilization related genes transcription confirmed these results, and besides, revealed that xylitol dehydrogenase gene ( KmXYL2 ) was the critical gene for xylose utilization and stringently regulated by glucose repression. Many other genes of candidate targets interacting with SNF1 were also evaluated by disruption, but none proved to be the key regulator in the pathway of the glucose repression on xylose utilization. Therefore, there may exist other signaling pathway(s) for glucose repression on xylose consumption. Based on these results, a thermotolerant xylose–glucose co-consumption platform strain of K. marxianus was constructed. Then, exogenous xylose reductase and xylose-specific transporter genes were overexpressed in the platform strain to obtain YHY013. The YHY013 could efficiently co-utilized the glucose and xylose from corncob hydrolysate or xylose mother liquor for xylitol production (> 100 g/L) even with inexpensive organic nitrogen sources. Conclusions The analysis of the glucose repression in K. marxianus laid the foundation for construction of the glucose–xylose co-utilizing platform strain. The efficient xylitol production strain further verified the potential of the platform strain in exploitation of lignocellulosic biomass.

Euglena gracilis is one of the few permitted edible microalgae. Considering consumer acceptance, E. gracilis grown heterotrophically with yellow appearances have wider food industrial applications such as producing meat analogs than green cells. However, there is much room to improve the protein content of heterotrophic culture cells. In this study, the effects of nitrogen sources, temperature, initial pH, and C/N ratios on the protein production of E. gracilis were evaluated under heterotrophic cultivation. These results indicated that ammonium sulfate was the optimal nitrogen source for protein production. The protein content of E. gracilis cultured by ammonium sulfate increased by 113% and 44.7% compared with that cultured by yeast extract and monosodium glutamate, respectively. The manipulation of the low C/N ratio further improved E. gracilis protein content to 66.10% (w/w), which was 1.6-fold of that in the C/N = 25 group. Additionally, amino acid analysis revealed that the nitrogen-to-protein conversion factor (NTP) could be affected by nitrogen sources. A superior essential amino acid index (EAAI) of 1.62 and a balanced amino acid profile further confirmed the high nutritional value of E. gracilis protein fed by ammonium sulfate. This study highlighted the vast potency of heterotrophic cultured E. gracilis as an alternative dietary protein source.

Lipids synthesized by oleaginous yeasts are considered to be the best candidates for biodiesel production. Cryptococcus humicola as an oleaginous yeast accumulated lipid in cells. In order to optimize the conditions for lipid production, different carbon and nitrogen sources were used and metals were added into the medium. Ca2+ addition increased the lipid production greatly. Xylose and peptone were optimal carbon source and nitrogen source, respectively for lipid accumulation. Response surface experiment results revealed that the accumulation of lipid could be maximized when the xylose, peptone and Ca2+ concentration was 61 g/L, 4.31 g/L, 0.67 mmol/L. C16 and C18 fatty acid account for about 91% of the total fatty acids. The most abundant fatty acid was oleic acid (42.68%), followed by palmitic acid (29.7%) and stearic acid (13.87%). The addition of Ca2+ increased the content of unsaturated fatty acids (such as C16:1 and C18:1) and improved the unsaturation of fatty acids. Quantitative real time PCR analysis revealed that expression of genes related to lipid biosynthesis showed up-regulated by Ca2+ treatment. This study provided a strategy for increase in lipid production and content of unsaturated fatty acids.

The golden chanterelle represents one of the commonly found, edible mushrooms that is highly valued in various cuisines. The present study focused on assessing the requirements of Cantharellus cibarius such as pH, temperature, as well as the carbon and nitrogen sources for mycelial growth. Optimization of the growth parameters was carried out by one-factor-at-a-time method. The optimal pH and temperature were determined to be 6.0 and 22.5 °C, respectively. Among the various carbon sources studied, sucrose at a concentration of 2% gave maximum mycelial growth and proved to be the most suitable one. Amongst the nitrogen sources studied, peptone, ammonium sulphate, and sodium nitrate, gave the maximum mycelial growth at an optimized concentration of 0.5%. In the presence of beef extract and yeast extract, a change in colony pigmentation from yellow to dark grey was observed. Finally, the carbon to nitrogen ratio of 2:0.5 proved to be optimal for mycelial growth. This study is the first report on the optimisation of in vitro growth requirements of C. cibarius.

Fe-N-C catalysts are potential substitutes to displace electrocatalysts containing noble chemical elements in the oxygen reduction reaction (ORR). However, their application is hampered by unsatisfactory activity and stability issues. The structures and morphologies of Fe-N-C catalysts have been found to be crucial for the number of active sites and local bonding structures. In this work, dicyandiamide (DCDA) and polyaniline (PANI) are shown to act as dual nitrogen sources to tune the morphology and structure of the catalyst and facilitate the ORR process. The dual nitrogen sources not only increase the amount of nitrogen doping atoms in the electrocatalytic Fe-C-N material, but also maintain a high nitrogen-pyrrole/nitrogen-graphitic: (N-P)/(N-G) value, improving the distribution density of catalytic active sites in the material. With a high surface area and amount of N-doping, the Fe-N-C catalyst developed can achieve an improved half-wave potential of 0.886 V (vs. RHE) in alkaline medium, and a better stability and methanol resistance than commercial Pt/C catalyst.

Kombucha is a popular fermented beverage that involves fermentation using a symbiotic culture of bacteria and yeast (SCOBY) and produces bacterial cellulose (BC). Carbon and nitrogen sources are essential in kombucha processing and BC production. However, studies on cost-effective BC production as an alternative source of leather have remained scarce. This study aimed to assess the effects of various nitrogen and carbon sources on the production of kombucha BC, investigate the qualities, and dye the product using natural colorant. Different nitrogen sources (such as black tea, white tea, and green tea) and carbon sources (honey, sugar cane, palm sugar, and brown sugar) were used to produce kombucha BC, as well as to appraise the product qualities, which were dyed using three distinct natural dyes (coffee, ginger, and sappan wood). The results revealed that different nitrogen and carbon sources produced different BC with different properties. Green tea (N-source) and palm sugar (C-source) containing medium produced a BC thickness of 0.194 ± 0.04 mm with the highest tensile strength (24.42 ± 3.90 g). Different dyes also result in the fabric having different colors: brownish yellow (coffee), yellowish orange (ginger), and red (sappan wood). All BC products showed color stability after 8 months of storing at room temperature. In conclusion, effective BC production could use green tea and palm sugar as the best nitrogen and carbon sources, respectively. Dyed BC showed good visual quality and is promising for its eco-friendly and sustainable application in fashion products.