Explore the vast range of titles available.

Background and Objectives: This study aimed to evaluate the effects of hard, soft, and semi-soft splints on TMJ vibrations in bruxers with JVA and to compare them with data obtained from asymptomatic individuals. Materials and Methods: A total of 64 individuals were divided into four subgroups: control (n = 15); and hard (n = 17), soft (n = 16), and semi-soft (n = 16) splints. Electrovibratography records from all individuals included in the study before and after the 3-month splint treatment were obtained with the Biopak® System. Joint vibration analysis was used to evaluate TMJ sounds. Data normality was examined with the Kolmogorov–Smirnov and Levene tests. The significance of the differences was investigated by One-Way ANOVA and by the Kruskal–Wallis test. Conover’s multiple comparison test was used in post hoc tests. (ClinicalTrials.gov identifier: NCT06893744, on 24 March 2025, titled; Effects of Different Occlusal Splints). Results: After 3 months of treatment, for I < 300 Hz right opening, the control group was statistically lower than both semi-soft (p < 0.001) and hard (p < 0.001) splint groups. The difference between semi-soft and hard splints in post-treatment I < 300 Hz right opening is not statistically significant. After 3 months of treatment compared with the beginning, the increases in left-opening Ti (p = 0.004), I < 300 Hz (p = 0.004), and PA (p = 0.007) values in the soft splint group were statistically significant. Conclusions: All three kinds of splints improved clinical symptoms and complaints of bruxers. For joint vibrations in bruxers, hard and semi-soft splints are more beneficial than soft splints.

Background Temporomandibular Disorders (TMD) may be characterized by pain and restricted jaw movements. In the absence of somatic factors in the temporomandibular joint, mainly myogenous, psychobiological, and psychosocial factors may be involved in the aetiology of myogenous TMD. An occlusal appliance (splint) is commonly used as a basic therapy of the dental practice. Alternatively, a type of physiotherapy which includes, apart from massage of sore muscles, aspects of cognitive-behavioural therapy might be a basic therapy for myogenous TMD. Treatment outcome of physiotherapy (Ph-Tx) was evaluated in comparison to that of splint therapy (Sp-Tx), using the index Treatment Duration Control (TDC) that enabled a randomized controlled trial with, comparable to clinical care, therapy-and-patient-specific treatment durations. Methods Seventy-two patients were randomly assigned to either Ph-Tx or Sp-Tx, with an intended treatment duration between 10 and 21 or 12 and 30 weeks respectively. Using TDC, the clinician controlled treatment duration and the number of visits needed. A blinded assessor recorded anamnestic and clinical data to determine TDC-values following treatment and a 1-year follow-up, yielding success rate (SR) and effectiveness (mean TDC) as treatment outcomes. Cohen’s d , was determined for pain intensity. Overall SR for stepped-care was assessed in a theoretical model, i.e . a second of the two studied therapies was applied if the first treatment was unsuccessful, and the effect of therapy sequence and difference in success rates was examined. Results SR and effectiveness were similar for Ph-Tx and Sp-Tx (long-term SR: 51–60%; TDC: −0.512– −0.575). Cohen’s d was 0.86 (Ph-Tx) and 1.39 (Sp-Tx). Treatment duration was shorter for Ph-Tx (on average 10.4 weeks less; p  < 0.001). Sp-Tx needed 7.1 less visits ( p  < 0.001). Conclusions Physiotherapy may be preferred as initial therapy over occlusal splint therapy in stepped-care of myogenous TMD. With a similar SR and effectiveness, physiotherapy has a shorter duration. Thus patients whose initial physiotherapy is unsuccessful can continue earlier with subsequent treatment. The stepped-care model reinforces the conclusion on therapy preference as the overall SR hardly depends on therapy sequence. Trial registration isrctn.com/ISRCTN17469828 . Retrospectively registered: 11/11/2016

Background and Objectives: In recent years, numerous studies have investigated and analyzed the levels of molecular biomarkers of temporomandibular disorders (TMD) from various tissue samples and body fluids. However, no study has investigated gingival crevicular fluid (GCF) in TMD patients. The purpose of this study was to determine the concentrations of pro-inflammatory cytokines in GCF before and after stabilization splint (SS) therapy in patients with painful TMD, to investigate whether SS administration causes changes in the concentrations of pro-inflammatory cytokines. An additional aim was to investigate the relationship of GCF cytokine levels with chronic pain intensity and clinical parameters. Materials and Methods: This prospective cohort study included 36 patients who were diagnosed with painful TMD using the Diagnostic Criteria for TMD (DC/TMD). GCF samples were collected at baseline before SS treatment (T0) and at one month (T1) and three months (T2) after the start of therapy. Customized ProcartaPlex Multiplex assays from eBioscience (Invitrogen™, Thermo Fisher Scientific, Viena, Austria) were used for the quantitative analysis of pro-inflammatory cytokines (IL-1β, IL-6, IL-7, IL-8, IL-13, and TNF-α). Patients filled out Croatian versions of questionnaires for self-assessment from Axis II DK/TMP: Graded Chronic Pain Scale (v2) (GCPSv2) and Jaw Function Limitation Scale-20 (JFLS-20). Results: The results showed that the GCF levels of IL-7 (Friedman’s test, p = 0.008) and IL-13 (Friedman’s test, p = 0.003) were significantly decreased at T2. The GCF level of IL-13 was in negative correlation with chronic pain grade score at T2 (Rho = −0.333), while the GCF level of IL-8 was in positive correlation with mobility limitation (Rho = 0.382) at T1. Conclusions: The results indicate that SS therapy might have a role in reducing inflammation and that the GCF could be a valuable medium for assessing molecular biomarkers.

In temporomandibular disorder (TMD), the effects of standard interventions such as using an occlusal splint and its impact on pain relief and pain catastrophizing are poorly understood. Earlier work pointed to a crucial role of insula activation with changes in pain relief by occlusal splint treatment. We performed a functional imaging study using specially developed splint systems to allow for a placebo‐controlled longitudinal design. Using functional MRI we examined 20 TMD patients during repetitive occlusal movements at baseline and over the course of splint therapy and also collected self‐reported pain catastrophizing. For balancing performance between baseline and after intervention we used occlusion force measures in an individualized fMRI‐splint system. Splint therapy lasted for approximately 7 weeks with one group selected by randomization wearing a palatine placebo splint over the first 3 weeks (delayed start; 11 individuals). As expected, fMRI activation in areas involved in pain processing (insula, primary and secondary somatosensory cortex) decreased with intervention. At baseline a positive correlation between activation of the left anterior insula and pain catastrophizing was present. Both parameters decreased over intervention while associations were primarily observable for patients with rather mild TMD. The top illustration shows the longitudinal design of the complete interventional study. The bottom shows anterior left insula activation, which decreases by the intervention (left), is associated with pain intensity (middle), and is related to pain catastrophizing only for the mildly affected participants.

Three-dimensional (3D) printing has emerged as a transformative technology in dental splint fabrication, offering significant advancements in customization, production speed, material efficiency, and patient comfort. This comprehensive review synthesizes the current literature on the clinical use, benefits, limitations, and future directions of 3D-printed dental splints across various disciplines, including prosthodontics, orthodontics, oral surgery, and restorative dentistry. Key 3D printing technologies such as stereolithography (SLA), digital light processing (DLP), and material jetting are discussed, along with the properties of contemporary photopolymer resins used in splint fabrication. Evidence indicates that while 3D-printed splints generally meet ISO standards for flexural strength and wear resistance, their mechanical properties are often 15–30% lower than those of heat-cured PMMA in head-to-head tests (flexural strength range 50–100 MPa vs. PMMA 100–130 MPa), and study-to-study variability is high. Some reports even show significantly reduced hardness and fatigue resistance in certain resins, underscoring material-specific heterogeneity. Clinical applications reviewed include occlusal stabilization for bruxism and temporomandibular disorders, surgical wafers for orthognathic procedures, orthodontic retainers, and endodontic guides. While current limitations include material aging, post-processing complexity, and variability in long-term outcomes, ongoing innovations—such as flexible resins, multi-material printing, and AI-driven design—hold promise for broader adoption. The review concludes with evidence-based clinical recommendations and identifies critical research gaps, particularly regarding long-term durability, pediatric applications, and quality control standards. This review supports the growing role of 3D printing as an efficient and versatile tool for delivering high-quality splint therapy in modern dental practice.

Background The mandibular opening path movements have different directions according to the craniofacial morphology of the patient but always downward and backward, therefore increasing the collapse of the upper airway. The aim of this work is to determine if there is a relationship between the craniofacial morphology and the mandibular movement to help understand the impact on the mandibular position. Methods 52 students with full permanent dentition aged 19 to 23 years (mean 21.3 SD 1.7; 29 females and 23 males), participated in the study. Each subject had a lateral cephalometric radiograph taken. The opening angle was determined for two levels of vertical openings at 5 and 10 mm. Results The opening angle showed a greater variability between subjects ranging from 63.15 to 77.08 for 5 mm angle and from for 61.65 to 75.72 for the 10 mm angle. Differences of facial phenotypes was evident when comparing the individual dissoccluding angle of the low angle horizontal pattern and high angle vertical pattern. Conclusions The opening angle is related to craniofacial morphology with higher vertical anterior and shorter anteroposterior faces having a more horizontal path of mandibular movement than shorter vertical anterior and longer anteroposterior subjects who have a more vertical path.