Catalogue Search | MBRL
Search Results Heading
Explore the vast range of titles available.
MBRLSearchResults
-
DisciplineDiscipline
-
Is Peer ReviewedIs Peer Reviewed
-
Item TypeItem Type
-
SubjectSubject
-
YearFrom:-To:
-
More FiltersMore FiltersSourceLanguage
Done
Filters
Reset
3,206
result(s) for
"emulsion stability"
Sort by:
How drying methods can influence the characteristics of mucilage obtained from chia seed and psyllium husk
by
Madrona, Grasiele Scaramal
,
Bergamasco, Rita de Cássia
,
Antigo, Jéssica Loraine Duenha
in
AGRONOMY
,
Aqueous solutions
,
Drying ovens
2020
The influence of drying methods (oven drying at 50 °C, and freeze drying) on the centesimal composition, functional characteristics and rheological properties of mucilage obtained from chia seed and psyllium husk were investigated. Results showed that high temperature of oven drying reduced fiber content, solubility, emulsion activity and emulsion stability of mucilage. All samples showed pseudo plastic behavior, with the best result produced by Heschel-Bulkley and Power Law models of chia and psyllium mucilage, respectively. These results will be helpful in selecting suitable drying methods depending on the functional and rheological properties desired of the chia and psyllium mucilage in a food product. RESUMO: Este estudo teve como objetivo avaliar a influência dos métodos de secagem (secagem em estufa a 50 °C e liofilização) sobre a composição centesimal, características funcionais e propriedades reológicas da mucilagem obtida a partir de sementes de chia e casca de psyllium. Os resultados mostraram que a alta temperatura de secagem em estufa reduziu o teor de fibras, a solubilidade, a atividade da emulsão e a estabilidade da emulsão das mucilagens. Todas as amostras apresentaram comportamento pseudoplástico, com o melhor ajuste produzido pelos modelos Heschel-Bulkley e Power Law das mucilagens de chia e psyllium, respectivamente. Estes resultados serão úteis na seleção do método de secagem adequado, dependendo das propriedades funcionais e reológicas desejadas das mucilagens de chia e psyllium.
Journal Article
Emulsifying properties of quail egg white proteins in different vegetable oil emulsions
by
Oliveira, Magno José de
,
Lafetá Junior, José Antônio de Queiroz
,
Coimbra, Jane Sélia dos Reis
in
Albumen
,
Analysis
,
Corn
2021
Emulsifying properties of oil in water emulsions using quail egg white protein (Coturnix coturnix japonica) as an emulsifying agent were investigated using the conductivity technique. Changes in emulsion conductivity were recorded during and after homogenization. The results were interpreted in terms of properties related to the emulsifying activity and emulsion stability. The effect of salt concentrations (NaCl) of 0.0, 0.29, 0.59, 1.17, 1.76, and 2.34% (w v-1) when mixed with egg white concentrations of 0.50, 1.00 and 1.50% (w v-1) were studied using corn and soybean vegetable oils. Globally, one observed that emulsifying activity and emulsion stability increase with the enhancement of salt concentration. However, the increase of the egg white concentration did not present a significant influence on emulsifying activity, causing an increment only in emulsion stability.
Journal Article
Effect of Surfactant Molecular Structure on Emulsion Stability Investigated by Interfacial Dilatational Rheology
2021
Polyglycerol polyricinolate (PGPR) and polyglycerol-2 dioleate were selected as model surfactants to construct water-in-oil (W/O) emulsions, and the effect of interfacial rheological properties of surfactant film on the stability of emulsions were investigated based on the interfacial dilatational rheological method. The hydrophobicity chain of PGPR is polyricinic acid condensed from ricinic acid, and that of polyglycerol-2 dioleate is oleic acid. Their dynamic interfacial tensions in 15 cycles of interfacial compression-expansion were determined. The interfacial dilatational viscoelasticity was analyzed by amplitude scanning in the range of 1–28% amplitude and frequency sweep in the range of 5–45 mHz under 2% amplitude. It was found that PGPR could quickly reach adsorption equilibrium and form interfacial film with higher interfacial dilatational viscoelastic modulus to resist the deformation of interfacial film caused by emulsion coalescence, due to its branched chain structure and longer hydrophobic chain, and the emulsion thus presented good stability. However, polyglycerol-2 dioleate with a straight chain structure had lower interfacial tension, and it failed to resist the interfacial disturbance caused by coalescence because of its lower interfacial dilatational viscoelastic modulus, and thus the emulsion was unstable. This study reveals profound understanding of the influence of branched structure of PGPR hydrophobic chain on the interfacial film properties and the emulsion stability, providing experimental reference and theoretical guidance for future design or improvement of surfactant.
Journal Article
Strategies for Reducing Fat in Mayonnaise and Their Effects on Physicochemical Properties
by
Abirached, Cecilia
,
Acuña, María Noel
,
Carreras, Tatiana
in
Antioxidants
,
Calories
,
Canola oil
2025
Mayonnaise is a widely consumed food emulsion. Traditional mayonnaise contains approximately 70–80% lipids, making it a high-fat, calorie-dense food. This study aimed to develop a reduced-fat mayonnaise with physicochemical properties comparable to commercial low-fat formulations but with a lower oil content (<30%). Three formulations were prepared using canola oil and high-oleic sunflower oil at different concentrations (10%, 15%, and 30%), with and without the addition of synthetic antioxidants (BHA and BHT). Guar gum was used to control the viscosity of the continuous phase, adjusting its concentration between 0.75% and 1.55%. The formulations were compared with a commercial low-fat sample (MH) in terms of flow and rheological properties, color, phase separation stability, particle size, microscopy, and oxidative stability. The formulations exhibited flow behavior and Konini’s viscosity similar to MH. The 15% oil formulation (MHO-15%) had a particle size comparable to MH. Both MH and the experimental formulations exhibited a weak gel structure. To achieve the characteristic yellow color, β-carotene should be added to MHO-15%. Formulations containing canola oil and those without antioxidants showed higher susceptibility to oxidation, leading to the selection of high-oleic oil with added antioxidants. Based on these findings, a potential reduced-fat mayonnaise-type sauce could be formulated by decreasing lipid content from 30% to 15%.
Journal Article
Emulsion Formation and Stabilization by Biomolecules: The Leading Role of Cellulose
2019
Emulsion stabilization by native cellulose has been mainly hampered because of its insolubility in water. Chemical modification is normally needed to obtain water-soluble cellulose derivatives. These modified celluloses have been widely used for a range of applications by the food, cosmetic, pharmaceutic, paint and construction industries. In most cases, the modified celluloses are used as rheology modifiers (thickeners) or as emulsifying agents. In the last decade, the structural features of cellulose have been revisited, with particular focus on its structural anisotropy (amphiphilicity) and the molecular interactions leading to its resistance to dissolution. The amphiphilic behavior of native cellulose is evidenced by its capacity to adsorb at the interface between oil and aqueous solvent solutions, thus being capable of stabilizing emulsions. In this overview, the fundamentals of emulsion formation and stabilization by biomolecules are briefly revisited before different aspects around the emerging role of cellulose as emulsion stabilizer are addressed in detail. Particular focus is given to systems stabilized by native cellulose, either molecularly-dissolved or not (Pickering-like effect).
Journal Article
Comparison of the Effects of Different Food-Grade Emulsifiers on the Properties and Stability of a Casein-Maltodextrin-Soybean Oil Compound Emulsion
2020
The improvement of food-grade emulsifiers in the properties and stability of complex emulsion has attracted much interest. In this study, the effects of six food-grade emulsifiers with a hydrophilic–lipophilic balance (HLB) range of 3.4–8.0 on a casein-maltodextrin-soybean oil compound emulsion were investigated by centrifugal precipitation rate (CPR), emulsifying activity index (EAI), microrheological properties, zeta potential, average particle size, and Turbiscan stability index (TSI). The optimal amounts of added succinylated monoglyceride (SMG) and polyglycerol fatty acid ester were 0.0025% and 0.1% (w/w), respectively, while that of the other four emulsifiers was 0.2% (w/w), according to the CPR. Thereinto, the SMG-stabilized emulsion exhibited the highest emulsifying activity and the lowest viscosity value and possessed the highest stability over 14 days of storage, which was indicated by the lowest TSI value and the smallest change in delta backscattering signal, relative to those of the other groups. Moreover, the emulsion stabilized by SMG displayed better emulsion stability than the control under a range of pH (6.0–8.0) and calcium ion concentrations (0–10 mM), which was attributed to the increased zeta potential value and the decreased average particle size of droplets with the addition of SMG. The present study provides a basic understanding for SMG improving the properties and stability of the complex emulsion.
Journal Article
Effects of Polyphenols on the Structure, Interfacial Properties, and Emulsion Stability of Pea Protein: Different Polyphenol Structures and Concentrations
2025
While protein-stabilized emulsions have demonstrated potential for various applications in food, their poor lipid oxidation remains a major challenge. The relationship between the architecture of polyphenolic compounds and their capacity to suppress lipid oxidation has not received extensive scrutiny. In this research, pea protein isolate (PPI)–polyphenol complexes were synthesized to examine their capability of maintaining emulsion stability and suppressing lipid oxidation. The collective evidence from fluorescence spectroscopy and molecular dynamics simulations pointed towards non-covalent and self-initiated interactions between the polyphenols and PPI. The presence of additional hydroxyl groups on the polyphenols could significantly boost the extent of these interactions. Specific clusters in PPI and polyphenols which might have formed hydrogen bonds and hydrophobic interactions. Polyphenols also reduced the interfacial tension and increased the surface hydrophobicity of the complex, thus driving more proteins to adsorb at the oil–water interface. The PPI-rosmarinic acid (RA)-stabilized emulsion had a smaller droplet size and higher electrostatic repulsion, enabling it to resist droplet aggregation. This emulsion stood out as having the most robust stability amongst all PPI-polyphenol emulsions and proved highly efficient in preventing lipid oxidation. This study bolsters the viability of employing polyphenol and pea protein-stabilized emulsions in developing new food products.
Journal Article
Plant-based milk alternatives an emerging segment of functional beverages: a review
2016
Plant-based or non-dairy milk alternative is the fast growing segment in newer food product development category of functional and specialty beverage across the globe. Nowadays, cow milk allergy, lactose intolerance, calorie concern and prevalence of hypercholesterolemia, more preference to vegan diets has influenced consumers towards choosing cow milk alternatives. Plant-based milk alternatives are a rising trend, which can serve as an inexpensive alternate to poor economic group of developing countries and in places, where cow’s milk supply is insufficient. Though numerous types of innovative food beverages from plant sources are being exploited for cow milk alternative, many of these faces some/any type of technological issues; either related to processing or preservation. Majority of these milk alternatives lack nutritional balance when compared to bovine milk, however they contain functionally active components with health promoting properties which attracts health conscious consumers. In case of legume based milk alternatives, sensory acceptability is a major limiting factor for its wide popularity. New and advanced non-thermal processing technologies such as ultra high temperature treatment, ultra high pressure homogenization, pulsed electric field processing are being researched for tackling the problems related to increase of shelf life, emulsion stability, nutritional completeness and sensory acceptability of the final product. Concerted research efforts are required in coming years in functional beverages segment to prepare tailor-made newer products which are palatable as well as nutritionally adequate.
Journal Article
A Review of the Utilization of Canola Protein as an Emulsifier in the Development of Food Emulsions
2023
Canola is the second-largest cultivated oilseed crop in the world and produces meal consisting of about 35–40% proteins. Despite this, less than 1% of the global plant-based protein market is taken up by canola protein. The reason behind such underutilization of canola protein and its rapeseed counterpart could be the harsh conditions of the industrial oil extraction process, the dark colour of the meal, the presence of various antinutrients, the variability in the protein composition based on the source, and the different properties of the two major protein components. Although academic research has shown immense potential for the use of canola protein and its rapeseed counterpart in emulsion development and stabilization, there is still a vast knowledge gap in efficiently utilizing canola proteins as an effective emulsifier in the development of various emulsion-based foods and beverages. In this context, this review paper summarizes the last 15 years of research on canola and rapeseed proteins as food emulsifiers. It discusses the protein extraction methods, modifications made to improve emulsification, emulsion composition, preparation protocols, and emulsion stability results. The need for further improvement in the scope of the research and reducing the knowledge gap is also highlighted, which could be useful for the food industry to rationally select canola proteins and optimize the processing parameters to obtain products with desirable attributes.
Journal Article
Formulation and characterization of Caesalpinia decapetala seed oil nanoemulsion: physicochemical properties, stability, and antibacterial activity
by
Nijhawan, Ginni
,
Bachheti, Rakesh Kumar
,
Bachheti, Archana
in
639/638
,
639/925
,
Anti-Bacterial Agents - chemistry
2025
Nanoemulsions contain acceptable O/W or W/O dispersions, with droplet sizes ranging from 100 to 500 nm. In the current study, we formulated O/W nanoemulsion using
Caesalpinia decapetala
seed oil, Tween 20, and Tween 80 surfactant through ultrasonic and spontaneous emulsification.
C. decapetala
is a climbing shrub thorny tree.
C. decapetala
seed oil contains different chemical constituents. As a result, physicochemical properties of prepared nanoemulsion came to be 132.561 ± 0.491–290.033 ± 1.952 nm average particle size, 0.028 ± 0.038–0.301 ± 0.042 polydispersive index,
-
32.274 to
-
58 mV zeta potentials, 4.383–6.5 pH value, 3.922–5.247 mPa.s viscosity value with spherical shape, with excellent physical stability. Subsequently, gram-positive and gram-negative bacterial strains were employed to assess the nanoemulsion’s antibacterial efficacy. Therefore, the results indicate that
C. decapetala
seed oil nanoemulsion has excellent antibacterial activity on gram-positive and gram-negative bacteria strains. This nanoemulsion formulated using Tween 80 had higher inhibition zones like 13.5,13, 12, and 11 mm than the other methods on
S. aureus
,
E.coli
,
S.pyogenes
,
and P. aeruginosa
, respectively. Generally, smaller particle size, polydispersive index, stable surface charge, and low value of viscosity indicate that formulated nanoemulsion had better stability and bioavailability activity for antibacterial activity.
Journal Article