Explore the vast range of titles available.

The idea of using water-in-Diesel (W/D) emulsion in recent studies as fuel for diesel engines is to reduce the emissions. The introduction of water into a diesel engine using W/D emulsion has a number of potential benefits and can be used as an alternative fuel. One of important factors to use this fuel was the distribution of water droplets in emulsion and emulsifier stability. In the present work, the effect of emulsifier dosage (water in diesel ratio) and heating of W/D emulsion on the stability period with using optical technique was investigated. Five samples of W/D emulsion at different emulsifier dosages (5%, 10%, 15%, 20%, and 25%) water content were studied, whereas the heating of emulsions was carried out for 40oC, 60oC, and 80oC. The results obtained from the current work manifested that an increase in water dosage to W/D emulsion had bad effects on the stability period, also, the increase in heating temperature for W/D emulsion revealed a negative effect on the emulsion stability.

Water-in-diesel (W/D) emulsion fuel is a potentially viable diesel fuel that can simultaneously enhance engine performance and reduce exhaust emissions in a current diesel engine without requiring engine modifications or incurring additional costs. In a consistent manner, the current study examines the impact of adding water, in the range of 5–30% wt. (5% increment) and 2% surfactant of polysorbate 20, on the performance in terms of brake torque (BT) and exhaust emissions of a four-cylinder four-stroke diesel engine. The relationship between independent factors, including water addition and engine speed, and dependent factors, including different exhaust released emissions and BT, was initially generated using machine learning support vector regression (SVR). Subsequently, a robust and modern optimization of the sea-horse optimizer (SHO) was run through the SVR model to find the optimal water addition and engine speed for improving the BT and lowering exhaust emissions. Furthermore, the SVR model was compared to the artificial neural network (ANN) model in terms of R-squared and mean square error (MSE). According to the experimental results, the BT was boosted by 3.34% compared to pure diesel at 5% water addition. The highest reduction in carbon monoxide (CO) and unburned hydrocarbon (UHC) was 9.57% and 15.63%, respectively, at 15% of water addition compared to diesel fuel. The nitrogen oxides (NOx) emissions from emulsified fuel were significantly lower than those from pure diesel, with a maximum decrease of 67.14% at 30% water addition. The suggested SVR-SHO model demonstrated superior prediction reliability, with a significant R-Squared of more than 0.98 and a low MSE of less than 0.003. The SHO revealed that adding 15% water to the W/D emulsion fuel at an engine speed of 1848 rpm yielded the optimum BT, CO, UHC, and NOx values of 49.5 N.m, 0.5%, 57 ppm, and 369 ppm, respectively. Finally, these outcomes have important implications for the potential of the SVR-SHO approach to minimize engine exhaust emissions while maximizing engine performance.

Water-in-diesel (W/D) emulsion fuel is a potential alternative fuel that can simultaneously lower NOx exhaust emissions and improves combustion efficiency. Additionally, there are no additional costs or engine modifications required when using W/D emulsion fuel. The proportion of water added and engine speed is crucial factors influencing engine behavior. This study aims to examine the impact of the W/D emulsion diesel fuel on engine performance and NOx pollutant emissions using a compression ignition (CI) engine. The emulsion fuel had water content ranging from 0 to 30% with a 5% increment, and 2% surfactant was employed. The tests were performed at speeds ranging from 1000 to 3000 rpm. All W/D emulsion fuel was compared to a standard of pure diesel in all tests. A four-cylinder, four-stroke, water-cooled, direct-injection diesel engine test bed was used for the experiments. The performance and exhaust emissions of the diesel engine were measured at full load and various engine speeds using a dynamometer and an exhaust gas analyzer, respectively. The second purpose of this study is to illustrate the application of two optimizers, grey wolf optimizer (GWO) and intelligent grey wolf optimizer (IGOW), along with using multivariate polynomial regression (MPR) to identify the optimum (W/D) emulsion blend percentage and engine speed to enhance the performance, reduce fuel consumption, and reduce NOX exhaust emissions of a diesel engine operating. The engine speed and proportion of water in the fuel mixture were the independent variables (inputs), while brake power (BP), brake thermal efficiency (BTE), brake-specific fuel consumption (BSFC), and NOx were the dependent variables (outcomes). It was experimentally observed that utilizing emulsified gasoline generally enhances engine performance and decreases emissions in general. Experimentally, at 5% water content and 2000 rpm, the BSFC has a minimal value of 0.258 kJ/kW·h. Under the same conditions, the maximum BP of 11.6 kW and BTE of 32.8% were achieved. According to the IGWO process findings, adding 9% water to diesel fuel and running the engine at a speed of 1998 rpm produced the highest BP (11.2 kW) and BTE (33.3%) and the lowest BSFC (0.259 kg/kW·h) and reduced NOx by 14.3% compared with the CI engine powered by pure diesel. The accuracy of the model is high, as indicated by a correlation coefficient R2 exceeding 0.97 and a mean absolute error (MAE) less than 0.04. In terms of the optimizer, the IGWO performs better than GWO in determining the optimal water addition and engine speed. This is attributed to the IGWO has excellent exploratory capability in the early stages of searching.

Diesel fuel exhibits excellent combustion characteristics and stability. However, diesel use is becoming restricted because of its associated environmental problems. Fuel emulsification, which increases efficiency and reduces pollution, became the solution of environmental problem. In this study, five water:diesel emulsions with mass ratios (0.3, 0.6, 1.0, 1.2, and 1.5) via ultrasonication were synthesized with and without surfactant. The optimal water:diesel ratio (=1:1) of an emulsion containing the surfactant was found by analyzing fuel concentration, mixing time, and viscosity. The combustion characteristics of single-droplet optimal emulsions were studied through ignition delay, burning rate, and total droplet lifetime at high temperature (400–700 °C) and pressure (1–15 bar), and micro-explosion phenomenon was observed. Although the ignition delay of emulsion increased, the total lifetime of the emulsion droplet was lower than that of diesel under 5 bar, 600 °C condition.

This study aims to assess the impact of the water ratio and nanoparticle concentration of neat diesel fuel on the performance characteristics of and exhaust gas emissions from diesel engines. The experimental tests were conducted in two stages. In the first stage, the effects of adding water to neat diesel fuel in ratios of 2.5% and 5% on engine performance and emissions characteristics were examined and compared to those of neat diesel at a constant engine speed of 3000 rpm under three different engine loads. A response surface methodology (RSM) based on a central composite design (CCD) was utilized to simulate the design of the experiment. According to the test results, adding water to neat diesel fuel increased the brake-specific fuel consumption and reduced the brake thermal efficiency compared to neat diesel fuel. In the examination of exhaust emissions, hydrocarbons (HC), carbon monoxide (CO), and nitrogen oxides (NOx) in the tested fuel containing 2.5% of water were decreased in comparison to pure diesel fuel by 16.62%, 21.56%, and 60.18%, respectively, on average, through engine loading. In the second stage, due to the trade-off between emissions and performance, the emulsion fuel containing 2.5% of water is chosen as the best emulsion from the previous stage and mixed with aluminum oxide nanoparticles at two dose levels (50 and 100 ppm). With the same engine conditions, the emulsion fuel mixed with 50 ppm of aluminum oxide nanoparticles exhibited the best performance and the lowest emissions compared to the other evaluated fuels. The outcomes of the investigations showed that a low concentration of 50 ppm with a small amount of 11 nm of aluminum oxide nanoparticles combined with a water diesel emulsion is a successful method for improving diesel engine performance while lowering emissions. Additionally, it was found that the mathematical model could accurately predict engine performance parameters and pollution characteristics.

The search for alternative fuels is driven by increasing environmental and health concerns across the globe. Water-in-diesel emulsions (WiDEs) have been explored over the years as a potential fuel for diesel engines to mitigate emissions of greenhouse gases, especially nitrogen oxides and smoke. Researchers have been developing and testing different formulations of emulsified fuels with the common goal of stabilizing the mixture and minimizing pollutant emissions without significantly compromising engine performance. In this work, a novel approach is taken by developing a hydrophilic emulsion formulation optimized for engine operating temperatures, overcoming the storage-related stability issues that most studies focus on. Two different mixtures of WiDE were heated and supplied to a Hatz 1B40 single-cylinder diesel engine. The engine was coupled to an eddy current dynamometer to measure speed, torque, and power values. Emissions of carbon monoxide (CO), carbon dioxide (CO2), hydrocarbons (HCs), nitric oxide (NO), and oxygen (O2) were measured by an AVL DiGas 1000 exhaust gas analyzer. Smoke emissions were measured by an AVL DiSmoke 480. This study represents a contribution to the field of alternative fuels for diesel engines by providing experimental evidence that formulating WiDE for operating temperatures can be advantageous and significantly improve thermal efficiency and reduce emissions of NO and smoke at specific engine operating conditions, with a maximum reduction of 46.86% for NO emissions and a maximum reduction of 83.67% for smoke emissions obtained when compared to diesel.

Biodiesel is a suitable alternative to diesel because of its carbon neutrality, renewability, lubricity, and lower pollutant emissions. However, extensive research indicates higher oxides of nitrogen (NOₓ) emissions with biodiesel. A practical method to combat this problem is utilizing water and biodiesel as emulsions. The effect of biodiesel-water emulsion in high-pressure fuel injection systems is not fully explored in the existing literature. The present study addresses this research gap by utilizing biodiesel-water emulsions in a modified light-duty diesel engine. The governor-controlled injection system was adapted to a fully flexible electronic system capable of high-pressure injection. Unlike other literature studies, the fuel injection timings were optimized with biodiesel-water emulsions to maximize brake thermal efficiency (bte) at every load condition. In a novel attempt, the biodiesel source, i.e., raw Karanja oil (RKO), a triglyceride, was utilized as the surfactant to stabilize the biodiesel-water emulsions containing 6%, 12%, and 18% water. The emulsions reduced the ignition delay and cylinder pressures, with less-intense premixed combustion and a more significant diffusion phase combustion than biodiesel. The emulsions also present a delayed combustion phasing following the injection timing trends. Among the tested emulsions, at 5.08 bar brake mean effective pressure (BMEP), 18% biodiesel-water emulsion resulted in an 18% reduced brake specific fuel consumption (bsfc), 5% increase in bte, 30% and 7% mitigation in NOₓ and smoke levels, with an increase of 10% and 28% for unburned hydrocarbon (HC) and carbon monoxide (CO) emissions.

Diesel engines are lean burn engines; hence CO and HC emissions in the exhaust are less likely to occur in substantial amounts. The emissions of serious concern in compression ignition engines are particulate matter and nitrogen oxides because of elevated temperature conditions of combustion. Hence the researchers have strived continuously to lower down the temperature of combustion in order to bring down the emissions from CI engines. This has been tried through premixed charge compression ignition, homogeneous charge compression ignition (HCCI), gasoline compression ignition and reactivity controlled compression ignition (RCCI). In this study, an attempt has been made to critically review the literature on low-temperature combustion conditions using various conventional and alternative fuels. The problems and challenges augmented with the strategies have also been described. Water-in-diesel emulsion technology has been discussed in detail. Most of the authors agree over the positive outcomes of water-diesel emulsion for both performance and emissions simultaneously.

Diesel engines are known for their excellent efficiency and are therefore used in a variety of applications. However, they are also one of the main sources of hazardous emissions such as nitrogen oxides (NOx) and smoke. Water-in-Diesel Emulsion (WiDE) is an alternative fuel that can possibly reduce some of the pollutant emissions without compromising engine performance. The surfactant formulation for WiDE usually follows the one used in water-in-oil (w/o) emulsions, where low hydrophilic–lipophilic balance (HLB) emulsifiers are preferred for better solubility in the diesel phase and stabilization at storage temperatures. However, by using a hydrophilic blend with a non-ionic surfactant, it is possible to develop an optimized formulation at higher fuel temperatures, which occur during an engine’s operating condition, achieving possibly higher benefits. Across the different speeds, the results for the emulsion show 7.57% mean improvement in specific fuel consumption (SFC), 19.14% mean improvement in thermal efficiency (TE), 5.54% mean reduction in carbon dioxide (CO2), 20.50% mean reduction in nitric oxide (NO) and 75.19% mean reduction in smoke levels. However, carbon monoxide (CO) and hydrocarbons (HC) emissions were higher, with a mean increase of 81.09% and 93.83%, respectively.

The paper deals with water/diesel emulsion effects on injection and combustion characteristics of a bus Diesel engine. The influences of water content in water/diesel emulsion are investigated by numerical simulation. Higher content of water in water/diesel emulsion increases the injection pressure and decreases the in-cylinder gas pressure, in-cylinder gas temperature, and rate of heat release, this leads to lower engine torque and power. The obtained results indicate a possibility of essential reduction of NO x and soot emissions by increasing water content. nema