Journal Article

A Numerical Study on Blowing Characteristics of a Dynamic Free Oxygen Lance Converter for Hot Metal Dephosphorization Technology Using a Coupled VOF-SMM Method

Shao Lei, Li, Qiang, Zou Zongshu, Li, Mingming

2021

Overview

Numerical simulations are performed to explore the basic blowing characteristics of a dynamic free lance converter applied to hot metal dephosphorization technology, in which the sliding mesh model (SMM) is used to regulate the rotation motion of the top lance and the volume of fluid (VOF) model is inducted to simulate flows of gaseous oxygen, liquid slag and metal. The fundamental phenomena such as the motion of phase interfaces, slag–metal emulsion and mixing, and shape and magnitude of the velocity field inside the slag–metal bath are predicted reasonably well, and effects of lance designs including the lance twist angle and rotation speed on the blowing characteristics are evaluated. The results show that the rotation motion of the lance improves the flows inside the molten bath and induces remarkable circumferential and swirl flows around the hot spot. Such flows change the splashing mode and accelerate the dispersion of the splashed metal inside the slag layer, consequently producing a quite uniform distribution of metal phase in emulsion and promoting slag–metal emulsion and mixing. The slag–metal emulsion is strengthened when increasing the lance twist angle, but achieves its minimum at the lance rotation speed of 1.0472 rad/s. The effects of the lance twist angle and rotation speed on flow fields inside the molten bath vary with the bath depth.

• Publisher: Springer Nature B.V
• Subject: Basic converters / Blowing rate / Dephosphorizing / Design / Finite element method / Fluid dynamics / Mathematical models / Metallurgy / Process controls / Rotation / Slag / Steel converters / Thrust bearings / Velocity / Velocity distribution / Viscosity