Asset Details
Do you wish to reserve the book?
The Properties of Mineral Additives Obtained by Collision Milling in Disintegrator
Hey, we have placed the reservation for you!
By the way, why not check out events that you can attend while you pick your title.
Oops! Something went wrong.
Looks like we were not able to place the reservation. Kindly try again later.
Are you sure you want to remove the book from the shelf?
The Properties of Mineral Additives Obtained by Collision Milling in Disintegrator
Do you wish to request the book?
The Properties of Mineral Additives Obtained by Collision Milling in Disintegrator
Please be aware that the book you have requested cannot be checked out. If you would like to checkout this book, you can reserve another copy
We have requested the book for you!
Your request is successful and it will be processed during the Library working hours. Please check the status of your request in My Requests.
Oops! Something went wrong.
Looks like we were not able to place your request. Kindly try again later.
Journal Article
The Properties of Mineral Additives Obtained by Collision Milling in Disintegrator
2016
Overview
Mineral additives are materials which are used in wide range of industries including construction, cosmetics, agricultural and biotechnology. Such materials as plasters, paints, abrasives etc. are produced using mineral powders. Main qualities of mineral additives are purity of chemical composition, grading properties and shape factor. To obtain powder like material most common method is milling. One of most effective milling method for refining of brittle material is grinding by collision in disintegrator. One of advantage of this method is that high milling energy is transferred to the milling material in short period of time. In present research three types of mineral materials were treated in disintegrator with specific energy Es applied 8.4 and 25.2 kWh/t: natural quartz sand 0.3/1mm, quartz-limestone 0.3/2.5mm sand and dolomite screenings 0/4mm. Results indicate that powder like material with d90 form 66 to 141 µm could be obtained at Es 8.4 kWh/t while increase of Es reduces d90 value to 48 to 72 µm and the milling efficiency was effected by the sand type.
Publisher
Trans Tech Publications Ltd
Subject
ISBN
9783035710724, 3035710724
