Journal Article

Inducing Tensile Failure of Claystone Through Thermal Pressurization in a Novel Triaxial Device

Braun, Philipp, Chabot, Baptiste, Ghabezloo, Siavash, Conil, Nathalie, Delage, Pierre, Vu, Minh-Ngoc

2022

Overview

Complex coupled thermo-hydromechanical (THM) loading paths are expected to occur in clay rocks which serve as host formations for geological radioactive waste repositories. Exothermic waste packages heat the rock, causing thermal strains and temperature induced pore pressure build-up. The drifts are designed in such a way as to limit these effects. One has to anticipate failure and fracturing of the material, should pore pressures exceed the tensile resistance of the rock. To characterise the behaviour of the Callovo-Oxfordian claystone (COx) under effective tension and to quantify the tensile failure criterion, a laboratory program is carried out in this work. THM loading paths which correspond to the expected in situ conditions are recreated in the laboratory. To this end, a special triaxial system was developed, which allows the independent control of radial and axial stresses, as well as of pore pressure and temperature of rock specimens. More importantly, the device allows one to maintain axial effective tension on a specimen. Saturated cylindrical claystone specimens were tested in undrained conditions under constrained lateral deformation and under nearly constant axial stress. The specimens were heated until the induced pore pressures created effective tensile stresses and ultimately fractured the material. The failure happened at average axial effective tensile stresses around 3.0 MPa. Fracturing under different lateral total stresses allows one to describe the failure with a Hoek–Brown or Fairhurst’s generalized Griffith criterion. Measured axial extension strains are analysed based on a transversely isotropic thermo-poroelastic constitutive model, which is able to satisfactorily reproduce the observed behaviour.HighlightsThermal pressurization of clay rock in deep radioactive waste repositories can reduce the effective stresses, which can lead to damage or failure.Our novel laboratory triaxial device is able mimic in situ conditions: Constant vertical total stress, zero lateral deformation and thermal pressurization.Pore pressure increase, vertical extension strains and thermal pressurization failure were recorded in a series of tests on Callovo-Oxfordian claystone specimens.The effective tensile strength was reached at values around 3 MPa in tension and temperatures between 53 and 64 °C, creating sub-horizontal fractures.The experimental responses can be well reproduced using a thermo-poroelasticity model.Hoek–Brown and Fairhurst generalized Griffith criteria appear suitable to account for the rock's tensile resistance.

• Publisher: Springer Nature B.V
• Subject: Axial stress / Clay / Constitutive models / Criteria / Deformation / Failure / Fractures / Fracturing / Laboratories / Mathematical models / Pore pressure / Pore water pressure / Poroelasticity / Pressure / Pressurization / Radioactive wastes / Repositories / Rocks / Temperature / Tensile strength / Tension