Journal Article

Leveraging Limited ISMN Soil Moisture Measurements to Develop the HYDRUS-1D Model and Explore the Potential of Remotely Sensed Precipitation for Soil Moisture Estimates in the Northern Territory, Australia

Ndehedehe, Christopher E., Usman, Muhammad

2025

Overview

Soil moisture plays a key role in the critical zone of the Earth and has extensive value in the understanding of hydrological, agricultural, and environmental processes (among others). Long-term (in situ) monitoring of soil moisture measurements is generally not practical; however, short-term measurements are often found. Limited soil moisture measurements can be employed to develop a numerical model for long-term and accurate soil moisture estimations. A key input variable to the model is precipitation, which is also not easily accessible, particularly at a finer spatial resolution; hence, publicly available remote sensing data can be used as an alternative. This study, therefore, aims to develop a numerical model HYDRUS-1D to estimate soil moisture in the data-scarce state of the Northern Territory, Australia, with a land cover of shrubland and a Tropical-Savannah type climate. The HDYRUS-1D is based on the numerical solution of Richards’ equation of variably saturated flow that relies on information about the soil water retention characteristics. This study utilized the van Genuchten model parameters, which were optimized (against measured soil moisture) through parameter optimization with initial estimates obtained from the HYDRUS catalogue. Initial estimates from different sources can differ for the same soil texture (e.g., loamy sand) and can induce uncertainties in the calibrated model. Therefore, a comprehensive uncertainty analysis was conducted to address potential uncertainties in the calibration process. The HYDRUS-1D was calibrated for a period between March 2012 and February 2013 and was independently validated against three different periods between March 2013 and October 2016. Root Mean Square Error (RMSE), Pearson’s correlation coefficient (R), and Mean Absolute Error (MAE) were used to assess the efficiency of the model in simulating the measured soil moisture. The model exhibited good performance in replicating measured soil moisture during calibration (RMSE = 0.00 m3/m3, MAE = 0.005 m3/m3, and R = 0.70), during validation period 1 (RMSE = 0.035 m3/m3 and MAE = 0.023 m3/m3, and R = 0.72), validation period 2 (RMSE = 0.054 m3/m3 and MAE = 0.039 m3/m3, and R = 0.51), and validation period 3 (RMSE = 0.046 m3/m3 and MAE = 0.032 m3/m3, and R = 0.61), respectively. Remotely sensed precipitation data were used from the CHRS-PERSIANN, CHRS-CCS, and CHRS-PDIR-Now to assess their capabilities in estimating soil moisture. Efficiency evaluation metrics and visual assessment revealed that these products underestimated the soil moisture. The CHRS-CCS outperformed other products in terms of overall efficiency (average RMSE of 0.040 m3/m3, average MAE of 0.023 m3/m3, and an average R of 0.68, respectively). An integrated approach based on numerical modelling and remote sensing employed in this study can help understand the long-term dynamics of soil moisture and soil water balance in the Northern Territory, Australia.

• Publisher: MDPI AG
• Subject: Analysis / Calibration / CHRS-CCS / CHRS-PDIR-Now / Correlation coefficient / Correlation coefficients / Cosmic rays / Efficiency / Environmental monitoring / Estimates / Estimation / Hydraulics / Hydrologic data / Land cover / Mathematical analysis / Mathematical models / Moisture content / Nitrates / Numerical models / Optimization / parameter optimization / Parameters / PERSIANN / Precipitation / Precipitation (Meteorology) / Remote sensing / Retention / Root-mean-square errors / Saturated flow / Soil dynamics / Soil moisture / Soil permeability / Soil properties / Soil texture / Soil water / Spatial discrimination / Spatial resolution / Territory / Texture / Uncertainty analysis / Water / Water balance / Water balance (Hydrology)