Journal Article

Hot deformation behavior of an 8% Cr cold roller steel

Xinghong, Bai, Wantang, Fu, Xichun, Zhao, Ping, Jiang, Zhenhua, Wang, Zhiqing, Lv

2011

Overview

An 8% Cr cold roller steel was compressed in the temperature range 900–1200 °C and strain rate range 0.01–10 s −1 . The mechanical behavior has been characterized using stress–strain curve analysis, kinetic analysis, processing maps, etc. Metallographic investigation was performed to evaluate the microstructure evolution and the mechanism of flow instability. It was found that the work hardening rate and flow stress decreased with increasing deformation temperature and decreasing strain rate in 8% Cr steel; the efficiency of power dissipation decreased with increasing Z value; flow instability was observed at higher Z -value conditions and manifested as flow localization near the grain boundary. The hot deformation equation and the dependences of critical stress for dynamic recrystallization and dynamic recrystallization grain size on Z value were obtained. The suggested processing window is in the temperature range 1050–1200 °C and strain rate range 0.1–1 s −1 in the hot processing of 8% Cr steel.

• Publisher: Springer US,Springer,Springer Nature B.V
• Subject: Analysis / Characterization and Evaluation of Materials / Chromium / Chromium steels / Classical Mechanics / cold / Cold rolling / crystallization / Crystallography and Scattering Methods / Deformation / Deformation mechanisms / Dynamic recrystallization / equations / Flow stability / Grain boundaries / Grain size / Hardening rate / kinetics / Materials Science / Mechanical properties / microstructure / Polymer Sciences / Power efficiency / Process mapping / Solid Mechanics / Stability analysis / steel / Strain analysis / Strain rate / temperature / Work hardening / Yield strength