Journal Article

Dynamic Characteristics Analysis of Three-Layer Steel–Concrete Composite Beams

Yan, Longbiao, He, Yikuan, Cao, Mingsheng, Yan, Bingchuan, You, Yachen, Cao, Long, Li, Benyuan, Han, Xu

2025

Overview

The dynamic behavior of three-layer composite beams, consisting of concrete slabs and steel beams, is influenced by the structural configuration of each layer as well as the shear connectors. The interlayer shear stiffness in three-layer composite beams governs their global dynamic behavior, while interlayer slippage-induced localized vibration effects represent a key limiting factor in practical applications. Based on the dynamic test results of steel–concrete double-layer composite beams, the feasibility of a finite element solid model for composite beams, which accounts for interlayer shear connectors and beam body characteristics, has been validated. Utilizing identical modeling parameters, an analytical model for the inherent vibration characteristics of three-layer steel–concrete composite beams has been developed. This study encompasses two types of composite beams: concrete–steel–concrete (CSC) and concrete–concrete–steel (CCS). Numerical simulations and theoretical analysis systematically investigated the effects of interface shear connector arrangements and structural geometric parameters on dynamic performance. Research indicates that the natural frequency of steel–concrete three-layer composite beams exhibits a distinct two-stage increasing trend with the enhancement in interlayer shear stiffness. For CSC-type simply supported composite beams, the fundamental vertical vibration frequency increases by 37.82% when achieving full shear connection at both interfaces compared to the unconnected state, while two-equal-span continuous beams show a 38.06% improvement. However, significant differences remain between the fully shear-connected state and theoretical rigid-bonding condition, with frequency discrepancies of 24.69% for simply supported beams and 24.07% for continuous beams. Notably, CCS-type simply supported beams display a 12.07% frequency increase with full concrete-to-concrete connection, exceeding even the theoretical rigid-bonding frequency value. Longitudinal connector arrangement non-uniformity significantly impacts dynamic characteristics, while the transverse arrangement has minimal influence. Among structural parameters, steel flange plate thickness has the most significant effect, followed by concrete slab width and thickness, with steel web thickness having the least impact. Based on the observation that the first-order vertical vibration frequency of three-layer composite beams exhibits a two-stage decreasing trend with an increase in the span-to-depth ratio, it is recommended that the span-to-depth ratio of three-layer steel–concrete composite beams should not be less than 10.

• Publisher: MDPI AG
• Subject: Analysis / Bonding / Bridges / Composite beams / Composite materials / Concrete / Concrete slabs / concrete–concrete–steel composite beam / concrete–steel–concrete composite beam / Connectors / Continuous beams / Data acquisition systems / Design optimization / Dynamic characteristics / Dynamic tests / Engineering / Interfaces / Interlayers / Mathematical models / Nonuniformity / Numerical analysis / Parameters / Resonant frequencies / Sensors / Shear stiffness / Simulation methods / Steel / Steel beams / Steel structures / Tensile strength / Theoretical analysis / Thickness / three-layer composite beam / Vibration / Vibration effects / Webs (structural) / Yield stress