Journal Article

Simulation on the Influence of Inclusion–Matrix Interaction on Crack Initiation and Growth in Hypo-Peritectic Steel

Ge, Bingbing, Zeng, Yanan, Miao, Xiangkan, Yuan, Yukang, Li, Junguo, Wang, Yajun, Wang, Yitong

2026

Overview

Hypo-peritectic steels are susceptible to interfacial cracking during thin-slab continuous casting, in which non-metallic inclusions play a critical role. This study systematically investigates the effects of inclusion type and morphology on interface cracking behavior in the steel matrix, with the aim of improving billet shell quality. Hot tensile experiments were conducted using a Gleeble 3800 thermal simulator, and a finite element–based cohesive zone model was developed to simulate inclusion-induced crack nucleation and propagation. The results demonstrate that inclusions markedly influence interfacial stress distribution and damage evolution. The maximum interfacial stresses associated with MnS, Al2O3, and composite inclusions are 20.7, 23.4, and 30.5 MPa, respectively. Owing to severe stress concentration at sharp corners, composite inclusions exhibit the earliest crack nucleation at an applied stress of 11.3 MPa and the highest energy dissipation. In all cases, cracks initially nucleate at the location of maximum tensile stress (α = 90°), propagate along the interface, and subsequently penetrate into the matrix, ultimately leading to failure. The strong agreement between numerical simulations and experimental results confirms that angular inclusions accelerate damage by disrupting matrix continuity. These findings provide theoretical guidance for improving hypo-peritectic steel quality through inclusion morphology control during continuous casting.

• Publisher: MDPI AG
• Subject: Aluminum oxide / Analysis / Continuous casting / Cooling / Crack initiation / Crack propagation / Cracking (fracturing) / Damage / Deformation / Ductility / Energy / Energy dissipation / Engineering / Founding / Fracture mechanics / Interfaces / interfacial cracks / interfacial interaction / Interfacial stresses / Low carbon steels / Mechanical properties / Metal fatigue / Morphology / non-metallic inclusions / Nonmetallic inclusions / Nucleation / Numerical analysis / Propagation / Scanning electron microscopy / Simulation / Simulation methods / Slab casting / Stress analysis / Stress concentration / Stress distribution / Temperature / Tensile stress / Thermal simulation / Thermal simulators