Journal Article

Applicability of Reynolds Analogy and Visualization of Coolant Flow Mixing in Downcomer of Land-Based Water-Cooled SMR

Kuritsin, Daniil, Solntsev, Dmitriy, Demkina, Tatiana, Nikolaev, Danil, Dmitriev, Sergei, Dobrov, Aleksandr, Doronkov, Denis, Pronin, Aleksey, Riazanov, Anton

2025

Overview

This article presents an experimental study on the hydrodynamics of coolant flow within the pressure vessel of a small modular reactor (SMR) cooled with water, including areas such as the annular downcomer, bottom chamber, and core-simulating channels that are being developed for use in land-based nuclear power plants. This paper describes the experimental setup and test model, measurement techniques used, experimental conditions under which this research was conducted, and results obtained. This study was conducted at the Nizhny Novgorod State Technical University (NNSTU) using a high-pressure aerodynamic testing facility and a scale model that included structural components similar to those found in loop-type reactors. Experiments were performed with Reynolds numbers (Re) ranging from 20,000 to 50,000 in the annular downcomer space of the test model. Two independent techniques were used to simulate the non-uniform flow field in the pressure vessel: passive impurity injection (adding propane to the airflow) and hot tracer (heating one of the reactor circulation loops). The axial velocity field at the inlet to the reactor core was also investigated. This study provided information about the spatial distribution of a tracer within the coolant flow in the annular downcomer and bottom chamber of the pressure vessel. Data on the distribution of the contrasting admixture are presented in plots. The swirling nature of the coolant flow within the pressurized vessel was analyzed. It was shown that the intensity of mixing within the bottom chamber of the pressure vessel is influenced by the presence of a central vortex. Parameters associated with the mixing of admixtures within the model for the pressure vessel were estimated. Additionally, the possibility for simulating flow with different temperature mixing processes using isothermal models was observed.

• Publisher: MDPI AG
• Subject: Accuracy / Admixtures / Aerodynamics / Air flow / Analysis / Chambers / coolant hydrodynamics / Coolants / Experiments / flow mixing / Flow simulation / Flow velocity / Fluid flow / Fluid mechanics / Heat transfer / Hydraulic measurements / Hydrodynamics / land-based SMR / Mechanical properties / Mixing processes / Nonuniform flow / Nuclear power plants / nuclear reactor / Nuclear reactors / Pressure vessels / Reactor cores / Reactors / Reynolds number / Scale models / Sensors / Shutdowns / Spatial distribution / Swirling / Temperature / Test facilities / thermal-hydraulic modeling / Turbulence models / Uniform flow / Velocity distribution / vortex dynamics / Water cooled reactors