Asset Details
Do you wish to reserve the book?
Biocide-mediated corrosion of coiled tubing
Hey, we have placed the reservation for you!
By the way, why not check out events that you can attend while you pick your title.
Oops! Something went wrong.
Looks like we were not able to place the reservation. Kindly try again later.
Are you sure you want to remove the book from the shelf?
Biocide-mediated corrosion of coiled tubing
Do you wish to request the book?
Biocide-mediated corrosion of coiled tubing
Please be aware that the book you have requested cannot be checked out. If you would like to checkout this book, you can reserve another copy
We have requested the book for you!
Your request is successful and it will be processed during the Library working hours. Please check the status of your request in My Requests.
Oops! Something went wrong.
Looks like we were not able to place your request. Kindly try again later.
Journal Article
Biocide-mediated corrosion of coiled tubing
2017
Overview
Coiled tubing corrosion was investigated for 16 field water samples (S5 to S20) from a Canadian shale gas field. Weight loss corrosion rates of carbon steel beads incubated with these field water samples averaged 0.2 mm/yr, but injection water sample S19 had 1.25±0.07 mm/yr. S19 had a most probable number of zero acid-producing bacteria and incubation of S19 with carbon steel beads or coupons did not lead to big changes in microbial community composition. In contrast other field water samples had most probable numbers of APB of 102/mL to 107/mL and incubation of these field water samples with carbon steel beads or coupons often gave large changes in microbial community composition. HPLC analysis indicated that all field water samples had elevated concentrations of bromide (average 1.6 mM), which may be derived from bronopol, which was used as a biocide. S19 had the highest bromide concentration (4.2 mM) and was the only water sample with a high concentration of active bronopol (13.8 mM, 2760 ppm). Corrosion rates increased linearly with bronopol concentration, as determined by weight loss of carbon steel beads, for experiments with S19, with filtered S19 and with bronopol dissolved in defined medium. This indicated that the high corrosion rate found for S19 was due to its high bronopol concentration. The corrosion rate of coiled tubing coupons also increased linearly with bronopol concentration as determined by electrochemical methods. Profilometry measurements also showed formation of multiple pits on the surface of coiled tubing coupon with an average pit depth of 60 μm after 1 week of incubation with 1 mM bronopol. At the recommended dosage of 100 ppm the corrosiveness of bronopol towards carbon steel beads was modest (0.011 mm/yr). Higher concentrations, resulting if biocide is added repeatedly as commonly done in shale gas operations, are more corrosive and should be avoided. Overdosing may be avoided by assaying the presence of residual biocide by HPLC, rather than by assaying the presence of residual surviving bacteria.
Publisher
Public Library of Science,Public Library of Science (PLoS)
Subject
/ Assaying
/ Bacteria
/ Bacteria - isolation & purification
/ Beads
/ Biocides
/ Canada
/ Carbon
/ Chromatography, High Pressure Liquid
/ Coiling
/ DNA Barcoding, Taxonomic - methods
/ Dosage
/ Fluid
/ Fluids
/ High-performance liquid chromatography
/ Oil and Gas Fields - chemistry
/ Oil and Gas Fields - microbiology
/ Pits
/ Propylene Glycols - analysis
/ Research and Analysis Methods
/ RNA, Ribosomal, 16S - genetics
/ Shale
/ Shales
/ Steel
/ Tubing
